A YANG Data Model for
Fabric Topology in Data-Center NetworksHuawei101 Software Avenue, Yuhua DistrictNanjingJiangsu210012Chinazhuangyan.zhuang@huawei.comHuawei101 Software Avenue, Yuhua DistrictNanjingJiangsu210012Chinashidanian@huawei.comChina Mobile32 Xuanwumen West Ave, Xicheng DistrictBeijingBeijing100053Chinagurong_cmcc@outlook.comNetflixhari@netflix.com
RTG Area
I2RS Working GroupYANGFabric TopologyData-Center NetworksThis document defines a YANG data model for fabric topology in
data-center networks and represents one possible view of the data-center
fabric. This document focuses on the data model only and does not
endorse any kind of network design that could be based on the
abovementioned model.IntroductionA data-center (DC) network can be composed of single or multiple
fabrics, which are also known as Points Of Delivery (PODs). These fabrics
may be heterogeneous due to implementation of different technologies
when a DC network is upgraded or new techniques and features are rolled
out. For example, within a DC network, Fabric A may use Virtual eXtensible Local Area Network
(VXLAN) while Fabric B may use VLAN. Likewise, an existing fabric may use VXLAN while a
new fabric (for example, a fabric introduced for DC upgrade and
expansion) may implement a technique discussed in the NVO3 Working Group, such as
Geneve . The configuration and management
of such DC networks with heterogeneous fabrics could result in
considerable complexity.For a DC network, a fabric can be considered as an atomic structure
for management purposes. From this point of view, the management of the
DC network can be decomposed into a set of tasks to manage each fabric
separately, as well as the fabric interconnections. The advantage of
this method is to make the overall management tasks flexible and easy to
extend in the future.As a basis for DC fabric management, this document defines a YANG
data model for a possible view of the fabric-based
data-center topology. To do so, it augments the generic network and
network topology data models defined in with information that
is specific to data-center fabric networks. The model defines the generic configuration and operational state for
a fabric-based network topology, which can subsequently be extended by
vendors with vendor-specific information as needed. The model can be
used by a network controller to represent its view of the fabric
topology that it controls and expose this view to network administrators
or applications for DC network management. Within the context of topology architecture defined in , this model can also be treated as an application of
the Interface to the Routing System (I2RS) network topology model in the scenario of data-center network
management. It can also act as a service topology when mapping network
elements at the fabric layer to elements of other topologies, such as
L3 topologies as defined in .By using the fabric topology model defined in this document, people
can treat a fabric as a holistic entity and focus on its characteristics
(such as encapsulation type and gateway type) as well as its
connections to other fabrics, while putting the underlay topology
aside. As such, clients can consume the topology information at the
fabric level with no need to be aware of the entire set of links and
nodes in the corresponding underlay networks. A fabric topology can be
configured by a network administrator using the controller by adding
physical devices and links into a fabric. Alternatively, fabric topology
can be learned from the underlay network infrastructure.Definitions and AcronymsKey Words
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL
NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED",
"MAY", and "OPTIONAL" in this document are to be interpreted as
described in BCP 14
when, and only when, they appear in all capitals, as shown here.
TerminologyPOD: a module of network, compute, storage, and application components that work together to deliver networking services. It represents a repeatable design pattern. Its components maximize the modularity, scalability, and manageability of data centers.Fabric: composed of several PODs to form a data-center network.
Model OverviewThis section provides an overview of the DC fabric
topology model and its relationship with other topology models.Topology Model StructureThe relationship of the DC fabric topology model and other topology
models is shown in .From the perspective of resource management and service
provisioning for a data-center network, the fabric topology model
augments the basic network topology model with definitions and
features specific to a DC fabric, to provide common configuration and
operations for heterogeneous fabrics.Fabric Topology ModelThe fabric topology model module is designed to be generic and can
be applied to data-center fabrics built with different technologies,
such as VLAN and VXLAN. The main purpose of this module is to configure
and manage fabrics and their connections. It provides a fabric-based
topology view for data-center applications.
Fabric TopologyIn the fabric topology module, a fabric is modeled as a node of a
network; as such, the fabric-based data-center network consists of a
set of fabric nodes and their connections. The following depicts a
snippet of the definitions to show the main structure of the
model. The notation syntax follows .The fabric topology module augments the generic ietf-network and
ietf-network-topology modules as follows:
A new topology type, "ietf-dc-fabric-topology", is defined and
added under the "network-types" container of the ietf-network
module.
Fabric is defined as a node under the network/node container. A
new container, "fabric-attributes", is defined to carry attributes
for a fabric such as gateway mode, fabric types, involved device
nodes, and links.
Termination points (in the network topology module) are augmented
with fabric port attributes defined in a container. The
"termination-point" here is used to represent a fabric "port" that
provides connections to other nodes, such as an internal device,
another fabric externally, or end hosts.
Details of the fabric node and the fabric termination point
extension will be explained in the following sections.Fabric Node ExtensionAs an atomic network (that is, a set of nodes and links that
composes a POD and also supports a single overlay/underlay instance),
a fabric itself is composed of a set of network elements, i.e., devices
and related links. The configuration of a fabric is contained under
the "fabric-attributes" container depicted as follows. The notation
syntax follows .In the module, additional data objects for fabric nodes are
introduced by augmenting the "node" list of the network module. New
objects include fabric name, type of the fabric, and descriptions of the
fabric, as well as a set of options defined in an "options"
container. The "options" container includes the gateway-mode type
(centralized or distributed) and traffic behavior (whether an Access
Control List (ACL) is needed for the traffic). Also, it includes a
list of device nodes and related links as "supporting-node" to form a
fabric network. These device nodes and links are represented as
leaf-refs of existing nodes and links in the underlay topology. For
the device node, the "role" object is defined to represent the role of
a device within the fabric, such as "SPINE" or "LEAF", which should
work together with the gateway-mode.Fabric Termination-Point ExtensionSince a fabric can be considered as a node, "termination-points"
can represent fabric "ports" that connect to other fabrics and end hosts,
as well as devices inside the fabric.As such, the set of "termination-points" of a fabric indicate all
of its connections, including its internal connections,
interconnections with other fabrics, and connections to end hosts.The structure of fabric ports is as follows. The notation syntax
follows .This structure augments the termination points (in the network topology module)
with fabric port attributes defined in a container.New nodes are defined for fabric ports, including fabric name, role
of the port within the fabric (internal port, external port to outside
network, access port to end hosts), and port type (L2 interface, L3
interface). By defining the device port as a tp-ref, a fabric port can
be mapped to a device node in the underlay network.Additionally, a new container for tunnel-options is introduced to present
the tunnel configuration on a port.The termination point information is learned from the underlay
networks, not configured by the fabric topology layer.Fabric YANG ModulesThis module imports typedefs from , and it
references and .
WG List:
Editor: Yan Zhuang
Editor: Danian Shi
";
description
"This module contains a collection of YANG definitions for
fabric.
Copyright (c) 2019 IETF Trust and the persons identified
as authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with
or without modification, is permitted pursuant to, and
subject to the license terms contained in, the Simplified
BSD License set forth in Section 4.c of the IETF Trust's
Legal Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC 8542;
see the RFC itself for full legal notices.";
revision 2019-02-25 {
description
"Initial revision.";
reference
"RFC 8542: A YANG Data Model for Fabric Topology
in Data-Center Networks";
}
identity fabric-type {
description
"Base type for fabric networks";
}
identity vxlan-fabric {
base fabric-type;
description
"VXLAN fabric";
}
identity vlan-fabric {
base fabric-type;
description
"VLAN fabric";
}
identity trill-fabric {
base fabric-type;
description
"TRILL fabric";
}
identity port-type {
description
"Base type for fabric port";
}
identity eth {
base port-type;
description
"Ethernet";
}
identity serial {
base port-type;
description
"Serial";
}
identity bandwidth {
description
"Base for bandwidth";
}
identity bw-1M {
base bandwidth;
description
"1M";
}
identity bw-10M {
base bandwidth;
description
"10Mbps";
}
identity bw-100M {
base bandwidth;
description
"100Mbps";
}
identity bw-1G {
base bandwidth;
description
"1Gbps";
}
identity bw-10G {
base bandwidth;
description
"10Gbps";
}
identity bw-25G {
base bandwidth;
description
"25Gbps";
}
identity bw-40G {
base bandwidth;
description
"40Gbps";
}
identity bw-100G {
base bandwidth;
description
"100Gbps";
}
identity bw-400G {
base bandwidth;
description
"400Gbps";
}
identity device-role {
description
"Base for the device role in a fabric.";
}
identity spine {
base device-role;
description
"This is a spine node in a fabric.";
}
identity leaf {
base device-role;
description
"This is a leaf node in a fabric.";
}
identity border {
base device-role;
description
"This is a border node to connect to other
fabric/network.";
}
identity fabric-port-role {
description
"Base for the port's role in a fabric.";
}
identity internal {
base fabric-port-role;
description
"The port is used for devices to access each
other within a fabric.";
}
identity external {
base fabric-port-role;
description
"The port is used for a fabric to connect to
outside network.";
}
identity access {
base fabric-port-role;
description
"The port is used for an endpoint to connect
to a fabric.";
}
identity service-capability {
description
"Base for the service of the fabric ";
}
identity ip-mapping {
base service-capability;
description
"NAT.";
}
identity acl-redirect {
base service-capability;
description
"ACL redirect, which can provide a Service Function Chain (SFC).";
}
identity dynamic-route-exchange {
base service-capability;
description
"Dynamic route exchange.";
}
/*
* Typedefs
*/
typedef fabric-id {
type nw:node-id;
description
"An identifier for a fabric in a topology.
This identifier can be generated when composing a fabric.
The composition of a fabric can be achieved by defining an
RPC, which is left for vendor specific implementation
and not provided in this model.";
}
typedef service-capabilities {
type identityref {
base service-capability;
}
description
"Service capability of the fabric";
}
typedef port-type {
type identityref {
base port-type;
}
description
"Port type: ethernet or serial or others.";
}
typedef bandwidth {
type identityref {
base bandwidth;
}
description
"Bandwidth of the port.";
}
typedef node-ref {
type instance-identifier;
description
"A reference to a node in topology";
}
typedef tp-ref {
type instance-identifier;
description
"A reference to a termination point in topology";
}
typedef link-ref {
type instance-identifier;
description
"A reference to a link in topology";
}
typedef underlay-network-type {
type identityref {
base fabric-type;
}
description
"The type of physical network that implements
this fabric. Examples are VLAN and TRILL.";
}
typedef device-role {
type identityref {
base device-role;
}
description
"Role of the device node.";
}
typedef fabric-port-role {
type identityref {
base fabric-port-role;
}
description
"Role of the port in a fabric.";
}
typedef fabric-port-type {
type enumeration {
enum layer2interface {
description
"L2 interface";
}
enum layer3interface {
description
"L3 interface";
}
enum layer2Tunnel {
description
"L2 tunnel";
}
enum layer3Tunnel {
description
"L3 tunnel";
}
}
description
"Fabric port type";
}
grouping fabric-port {
description
"Attributes of a fabric port.";
leaf name {
type string;
description
"Name of the port.";
}
leaf role {
type fabric-port-role;
description
"Role of the port in a fabric.";
}
leaf type {
type fabric-port-type;
description
"Type of the port";
}
leaf device-port {
type tp-ref;
description
"The device port it mapped to.";
}
choice tunnel-option {
description
"Tunnel options to connect two fabrics.
It could be L2 Tunnel or L3 Tunnel.";
}
}
}
]]>
WG List:
Editor: Yan Zhuang
Editor: Danian Shi
";
description
"This module contains a collection of YANG definitions for
fabric.
Copyright (c) 2019 IETF Trust and the persons identified
as authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with
or without modification, is permitted pursuant to, and
subject to the license terms contained in, the Simplified
BSD License set forth in Section 4.c of the IETF Trust's
Legal Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC 8542;
see the RFC itself for full legal notices.";
revision 2019-02-25 {
description
"Initial revision.";
reference
"RFC 8542: A YANG Data Model for Fabric Topology
in Data-Center Networks";
}
//grouping statements
grouping fabric-network-type {
description
"Identify the topology type to be fabric.";
container fabric-network {
presence "indicates fabric Network";
description
"The presence of the container node indicates
fabric topology";
}
}
grouping fabric-options {
description
"Options for a fabric";
leaf gateway-mode {
type enumeration {
enum centralized {
description
"The Fabric uses centralized
gateway, in which gateway is deployed on SPINE
node.";
}
enum distributed {
description
"The Fabric uses distributed
gateway, in which gateway is deployed on LEAF
node.";
}
}
default "distributed";
description
"Gateway mode of the fabric";
}
leaf traffic-behavior {
type enumeration {
enum normal {
description
"Normal means no policy is needed
for all traffic";
}
enum policy-driven {
description
"Policy driven means policy is
needed for the traffic; otherwise, the traffic
will be discarded.";
}
}
default "normal";
description
"Traffic behavior of the fabric";
}
leaf-list capability-supported {
type fabrictypes:service-capabilities;
description
"It provides a list of supported services of the
fabric. The service-capabilities is defined as
identity-ref. Users can define more services
by defining new identities.";
}
}
grouping device-attributes {
description
"device attributes";
leaf device-ref {
type fabrictypes:node-ref;
description
"The device that the fabric includes that refers
to a node in another topology.";
}
leaf-list role {
type fabrictypes:device-role;
default "fabrictypes:leaf";
description
"It is a list of device roles to represent the roles
that a device plays within a POD, such as SPINE,
LEAF, Border, or Border-Leaf.
The device role is defined as identity-ref. If more
than 2 stages are used for a POD, users can
define new identities for the device role.";
}
}
grouping link-attributes {
description
"Link attributes";
leaf link-ref {
type fabrictypes:link-ref;
description
"The link that the fabric includes that refers to
a link in another topology.";
}
}
grouping port-attributes {
description
"Port attributes";
leaf port-ref {
type fabrictypes:tp-ref;
description
"The port that the fabric includes that refers to
a termination-point in another topology.";
}
leaf port-type {
type fabrictypes:port-type;
description
"Port type is defined as identity-ref. The current
types include ethernet or serial. If more types
are needed, developers can define new identities.";
}
leaf bandwidth {
type fabrictypes:bandwidth;
description
"Bandwidth of the port. It is defined as identity-ref.
If more speeds are introduced, developers can define
new identities for them. Current speeds include 1M, 10M,
100M, 1G, 10G, 25G, 40G, 100G, and 400G.";
}
}
grouping fabric-attributes {
description
"Attributes of a fabric";
leaf fabric-id {
type fabrictypes:fabric-id;
description
"An identifier for a fabric in a topology.
This identifier can be generated when composing a fabric.
The composition of a fabric can be achieved by defining an
RPC, which is left for vendor-specific implementation and
not provided in this model.";
}
leaf name {
type string;
description
"Name of the fabric";
}
leaf type {
type fabrictypes:underlay-network-type;
description
"The type of physical network that implements this
fabric. Examples are VLAN and TRILL.";
}
container vni-capacity {
description
"The range of the VXLAN Network Identifier
(VNI) defined in RFC 7348 that the POD uses.";
leaf min {
type int32;
description
"The lower-limit VNI.";
}
leaf max {
type int32;
description
"The upper-limit VNI.";
}
}
leaf description {
type string;
description
"Description of the fabric";
}
container options {
description
"Options of the fabric";
uses fabric-options;
}
list device-nodes {
key "device-ref";
description
"Device nodes that are included in a fabric.";
uses device-attributes;
}
list device-links {
key "link-ref";
description
"Links that are included within a fabric.";
uses link-attributes;
}
list device-ports {
key "port-ref";
description
"Ports that are included in the fabric.";
uses port-attributes;
}
}
// augment statements
augment "/nw:networks/nw:network/nw:network-types" {
description
"Introduce a new network type for fabric-based topology";
uses fabric-network-type;
}
augment "/nw:networks/nw:network/nw:node" {
when '/nw:networks/nw:network/nw:network-types/'
+ 'fabric:fabric-network' {
description
"Augmentation parameters apply only for networks
with fabric topology";
}
description
"Augmentation for fabric nodes created by
fabric topology.";
container fabric-attributes {
description
"Attributes for a fabric network";
uses fabric-attributes;
}
}
augment "/nw:networks/nw:network/nw:node/nt:termination-point" {
when '/nw:networks/nw:network/nw:network-types/'
+ 'fabric:fabric-network' {
description
"Augmentation parameters apply only for networks
with fabric topology";
}
description
"Augmentation for port on fabric.";
container fport-attributes {
config false;
description
"Attributes for fabric ports";
uses fabrictypes:fabric-port;
}
}
}
]]>IANA ConsiderationsThis document registers the following namespace URIs in the "IETF XML
Registry" :URI:urn:ietf:params:xml:ns:yang:ietf-dc-fabric-typesRegistrant Contact: The IESG.XML: N/A; the requested URI is an XML namespace. URI:urn:ietf:params:xml:ns:yang:ietf-dc-fabric-topologyRegistrant Contact: The IESG.XML: N/A; the requested URI is an XML namespace.
URI:urn:ietf:params:xml:ns:yang:ietf-dc-fabric-topology-stateRegistrant Contact: The IESG.XML: N/A; the requested URI is an XML namespace.This document registers the following YANG modules in the "YANG
Module Names" registry :
Name: ietf-dc-fabric-typesNamespace: urn:ietf:params:xml:ns:yang:ietf-dc-fabric-typesPrefix: fabrictypesReference: RFC 8542
Name: ietf-dc-fabric-topologyNamespace: urn:ietf:params:xml:ns:yang:ietf-dc-fabric-topologyPrefix: fabricReference: RFC 8542
Name: ietf-dc-fabric-topology-stateNamespace: urn:ietf:params:xml:ns:yang:ietf-dc-fabric-topology-statePrefix: sfabricReference: RFC 8542
Security ConsiderationsThe YANG module defined in this document is designed to be accessed
via network management protocols such as NETCONF or RESTCONF . The lowest
NETCONF layer is the secure transport layer, and
the mandatory-to-implement secure transport is Secure Shell (SSH)
. The lowest RESTCONF layer is HTTPS, and the
mandatory-to-implement secure transport is TLS .The Network Configuration Access Control Model (NACM) provides the means to
restrict access for particular NETCONF or RESTCONF users to a
preconfigured subset of all available NETCONF or RESTCONF protocol
operations and content.There are a number of data nodes defined in this YANG module that are
writable/creatable/deletable (i.e., config true, which is the default). These
data nodes may be considered sensitive or vulnerable in some network
environments. Write operations (e.g., edit-config) to these data nodes
without proper protection can have a negative effect on network
operations. The subtrees and data nodes and their sensitivity/vulnerability
in the ietf-dc-fabric-topology module are as follows:fabric-attributes: A malicious client could attempt to sabotage the
configuration of important fabric attributes, such as device nodes or
type.Some of the readable data nodes in this YANG module may be
considered sensitive or vulnerable in some network environments. It is
thus important to control read access (e.g., via get, get-config, or
notification) to these data nodes. The subtrees and data nodes and
their sensitivity/vulnerability in the ietf-dc-fabric-topology module
are as follows:fport-attributes: A malicious client could attempt to read the
connections of fabrics without permission, such as device-port and
name.ReferencesNormative ReferencesKey words for use in RFCs to Indicate Requirement LevelsIn many standards track documents several words are used to signify the requirements in the specification. These words are often capitalized. This document defines these words as they should be interpreted in IETF documents. This document specifies an Internet Best Current Practices for the Internet Community, and requests discussion and suggestions for improvements.The IETF XML RegistryThis document describes an IANA maintained registry for IETF standards which use Extensible Markup Language (XML) related items such as Namespaces, Document Type Declarations (DTDs), Schemas, and Resource Description Framework (RDF) Schemas.YANG - A Data Modeling Language for the Network Configuration Protocol (NETCONF)YANG is a data modeling language used to model configuration and state data manipulated by the Network Configuration Protocol (NETCONF), NETCONF remote procedure calls, and NETCONF notifications. [STANDARDS-TRACK]Network Configuration Protocol (NETCONF)The Network Configuration Protocol (NETCONF) defined in this document provides mechanisms to install, manipulate, and delete the configuration of network devices. It uses an Extensible Markup Language (XML)-based data encoding for the configuration data as well as the protocol messages. The NETCONF protocol operations are realized as remote procedure calls (RPCs). This document obsoletes RFC 4741. [STANDARDS-TRACK]Using the NETCONF Protocol over Secure Shell (SSH)This document describes a method for invoking and running the Network Configuration Protocol (NETCONF) within a Secure Shell (SSH) session as an SSH subsystem. This document obsoletes RFC 4742. [STANDARDS-TRACK]The YANG 1.1 Data Modeling LanguageYANG is a data modeling language used to model configuration data, state data, Remote Procedure Calls, and notifications for network management protocols. This document describes the syntax and semantics of version 1.1 of the YANG language. YANG version 1.1 is a maintenance release of the YANG language, addressing ambiguities and defects in the original specification. There are a small number of backward incompatibilities from YANG version 1. This document also specifies the YANG mappings to the Network Configuration Protocol (NETCONF).RESTCONF ProtocolThis document describes an HTTP-based protocol that provides a programmatic interface for accessing data defined in YANG, using the datastore concepts defined in the Network Configuration Protocol (NETCONF).Ambiguity of Uppercase vs Lowercase in RFC 2119 Key WordsRFC 2119 specifies common key words that may be used in protocol specifications. This document aims to reduce the ambiguity by clarifying that only UPPERCASE usage of the key words have the defined special meanings.Network Configuration Access Control ModelThe standardization of network configuration interfaces for use with the Network Configuration Protocol (NETCONF) or the RESTCONF protocol requires a structured and secure operating environment that promotes human usability and multi-vendor interoperability. There is a need for standard mechanisms to restrict NETCONF or RESTCONF protocol access for particular users to a preconfigured subset of all available NETCONF or RESTCONF protocol operations and content. This document defines such an access control model.This document obsoletes RFC 6536.Network Management Datastore Architecture (NMDA)Datastores are a fundamental concept binding the data models written in the YANG data modeling language to network management protocols such as the Network Configuration Protocol (NETCONF) and RESTCONF. This document defines an architectural framework for datastores based on the experience gained with the initial simpler model, addressing requirements that were not well supported in the initial model. This document updates RFC 7950.A YANG Data Model for Network TopologiesThis document defines an abstract (generic, or base) YANG data model for network/service topologies and inventories. The data model serves as a base model that is augmented with technology-specific details in other, more specific topology and inventory data models.A YANG Data Model for Layer 3 TopologiesThis document defines a YANG data model for Layer 3 network topologies.The Transport Layer Security (TLS) Protocol Version 1.3This document specifies version 1.3 of the Transport Layer Security (TLS) protocol. TLS allows client/server applications to communicate over the Internet in a way that is designed to prevent eavesdropping, tampering, and message forgery.This document updates RFCs 5705 and 6066, and obsoletes RFCs 5077, 5246, and 6961. This document also specifies new requirements for TLS 1.2 implementations.Informative ReferencesGeneve: Generic Network Virtualization EncapsulationVirtual eXtensible Local Area Network (VXLAN): A Framework for Overlaying Virtualized Layer 2 Networks over Layer 3 NetworksThis document describes Virtual eXtensible Local Area Network (VXLAN), which is used to address the need for overlay networks within virtualized data centers accommodating multiple tenants. The scheme and the related protocols can be used in networks for cloud service providers and enterprise data centers. This memo documents the deployed VXLAN protocol for the benefit of the Internet community.YANG Tree DiagramsThis document captures the current syntax used in YANG module tree diagrams. The purpose of this document is to provide a single location for this definition. This syntax may be updated from time to time based on the evolution of the YANG language.A YANG Data Model for IP ManagementThis document defines a YANG data model for management of IP implementations. The data model includes configuration and system state.The YANG data model in this document conforms to the Network Management Datastore Architecture defined in RFC 8342.This document obsoletes RFC 7277.Non-NMDA-State ModulesThe YANG module, ietf-dc-fabric-topology, defined in this document
augments two modules, ietf-network and ietf-network-topology, that are
designed to be used in conjunction with implementations that support the
Network Management Datastore Architecture (NMDA) defined in . In order to allow implementations to use the model
even in cases when NMDA is not supported, a set of companion modules have
been defined that represent a state model of networks and network
topologies: ietf-network-state and ietf-network-topology-state,
respectively. In order to be able to use the model for fabric topologies defined in
this document in conjunction with non-NMDA-compliant
implementations, a corresponding companion module needs to be introduced
as well. This companion module, ietf-dc-fabric-topology-state, mirrors
ietf-dc-fabric-topology. However, the ietf-dc-fabric-topology-state module
augments ietf-network-state
(instead of ietf-network and ietf-network-topology), and all of its data
nodes are non-configurable.Like ietf-network-state and ietf-network-topology-state,
ietf-dc-fabric-topology-state SHOULD NOT be supported by implementations
that support NMDA. It is for this reason that the module is defined in the
Appendix.The definition of the module follows. As the structure of the
module mirrors that of its underlying module, the YANG tree is not
depicted separately.
WG List:
Editor: Yan Zhuang
Editor: Danian Shi
";
description
"This module contains a collection of YANG definitions for
fabric state, representing topology that either is learned
or results from applying topology that has been
configured per the ietf-dc-fabric-topology model, mirroring
the corresponding data nodes in this model.
This model mirrors the configuration tree of ietf-dc-fabric
-topology but contains only read-only state data. The model
is not needed when the implementation infrastructure supports
the Network Management Datastore Architecture (NMDA).
Copyright (c) 2019 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD
License set forth in Section 4.c of the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC 8542;
see the RFC itself for full legal notices.";
revision 2019-02-25 {
description
"Initial revision.";
reference
"RFC 8542: A YANG Data Model for Fabric Topology in
Data-Center Networks";
}
//grouping statements
grouping fabric-network-type {
description
"Identify the topology type to be fabric.";
container fabric-network {
presence "indicates fabric Network";
description
"The presence of the container node indicates
fabric topology";
}
}
grouping fabric-options {
description
"Options for a fabric";
leaf gateway-mode {
type enumeration {
enum centralized {
description
"The fabric uses centralized
gateway, in which gateway is deployed on SPINE
node.";
}
enum distributed {
description
"The fabric uses distributed
gateway, in which gateway is deployed on LEAF
node.";
}
}
default "distributed";
description
"Gateway mode of the fabric";
}
leaf traffic-behavior {
type enumeration {
enum normal {
description
"Normal means no policy is needed
for all traffic";
}
enum policy-driven {
description
"Policy driven means policy is
needed for the traffic; otherwise, the traffic
will be discarded.";
}
}
default "normal";
description
"Traffic behavior of the fabric";
}
leaf-list capability-supported {
type fabrictypes:service-capabilities;
description
"It provides a list of supported services of the
fabric. The service-capabilities is defined as
identity-ref. Users can define more services
by defining new identities.";
}
}
grouping device-attributes {
description
"device attributes";
leaf device-ref {
type fabrictypes:node-ref;
description
"The device that the fabric includes that refers
to a node in another topology.";
}
leaf-list role {
type fabrictypes:device-role;
default "fabrictypes:leaf";
description
"It is a list of device roles to represent the roles
that a device plays within a POD, such as SPINE,
LEAF, Border, or Border-Leaf.
The device role is defined as identity-ref. If more
than 2 stages are used for a POD, users can
define new identities for the device role.";
}
}
grouping link-attributes {
description
"Link attributes";
leaf link-ref {
type fabrictypes:link-ref;
description
"The link that the fabric includes that refers to
a link in another topology.";
}
}
grouping port-attributes {
description
"Port attributes";
leaf port-ref {
type fabrictypes:tp-ref;
description
"The port that the fabric includes that refers to
a termination-point in another topology.";
}
leaf port-type {
type fabrictypes:port-type;
description
"Port type is defined as identity-ref. The current
types include ethernet or serial. If more types
are needed, developers can define new identities.";
}
leaf bandwidth {
type fabrictypes:bandwidth;
description
"Bandwidth of the port. It is defined as
identity-ref. If more speeds are introduced,
developers can define new identities for them. Current
speeds include 1M, 10M, 100M, 1G, 10G,
25G, 40G, 100G, and 400G.";
}
}
grouping fabric-attributes {
description
"Attributes of a fabric";
leaf fabric-id {
type fabrictypes:fabric-id;
description
"Fabric ID";
}
leaf name {
type string;
description
"Name of the fabric";
}
leaf type {
type fabrictypes:underlay-network-type;
description
"The type of physical network that implements this
fabric. Examples are VLAN and TRILL.";
}
container vni-capacity {
description
"The range of the VXLAN Network
Identifier (VNI) defined in RFC 7348 that the POD uses.";
leaf min {
type int32;
description
"The lower-limit VNI.";
}
leaf max {
type int32;
description
"The upper-limit VNI.";
}
}
leaf description {
type string;
description
"Description of the fabric";
}
container options {
description
"Options of the fabric";
uses fabric-options;
}
list device-nodes {
key "device-ref";
description
"Device nodes that are included in a fabric.";
uses device-attributes;
}
list device-links {
key "link-ref";
description
"Links that are included within a fabric.";
uses link-attributes;
}
list device-ports {
key "port-ref";
description
"Ports that are included in the fabric.";
uses port-attributes;
}
}
// augment statements
augment "/nws:networks/nws:network/nws:network-types" {
description
"Introduce a new network type for fabric-based logical
topology";
uses fabric-network-type;
}
augment "/nws:networks/nws:network/nws:node" {
when '/nws:networks/nws:network/nws:network-types'
+ '/sfabric:fabric-network' {
description
"Augmentation parameters apply only for
networks with fabric topology.";
}
description
"Augmentation for fabric nodes.";
container fabric-attributes-state {
description
"Attributes for a fabric network";
uses fabric-attributes;
}
}
}
]]>AcknowledgementsWe wish to acknowledge the helpful contributions, comments, and
suggestions that were received from Alexander Clemm, Donald
E. Eastlake 3rd, Xufeng Liu, Susan Hares, Wei Song, Luis
M. Contreras, and Benoit Claise.