RIPSAP DEFINITIONS ::= BEGIN -- This MIB defines the management information for the RIP and SAP -- protocols running in an IPX enviroment. It provides information in -- addition to that contained in the IPX MIB itself. All tables in this -- MIB are linked to an instance of IPX via the system instance -- identifier as defined in the IPX MIB. IMPORTS enterprises, Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212; novell OBJECT IDENTIFIER ::= {enterprises 23} mibDoc OBJECT IDENTIFIER ::= { novell 2 } ripsap OBJECT IDENTIFIER ::= {mibDoc 20} -- Groups ripsapSystem OBJECT IDENTIFIER ::= {ripsap 1} ripsapCircuit OBJECT IDENTIFIER ::= {ripsap 2} -- System Group -- This group contains global information about each instance of -- RIP/SAP running on one system. -- RIP System Table -- This table contains an entry for each instance of RIP -- running on the system. ripSysTable OBJECT-TYPE SYNTAX SEQUENCE OF RIPSysEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The RIP system table." ::= {ripsapSystem 1} ripSysEntry OBJECT-TYPE SYNTAX RIPSysEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry corresponds to one instance of RIP running on the system." INDEX {ripSysInstance} ::= {ripSysTable 1} RIPSysEntry ::= SEQUENCE { ripSysInstance INTEGER, ripSysState INTEGER, ripSysIncorrectPackets Counter } ripSysInstance OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The unique identifier of the instance of RIP to which this row corresponds. This value links the instance of RIP to an instance of IPX running on the system (i.e. the value of ripSysInstance should be the same as a value of ipxSysInstance). This value may be written only when creating a new entry in the table." ::= {ripSysEntry 1} ripSysState OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the operational state of this instance of RIP." ::= {ripSysEntry 2} ripSysIncorrectPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times that an incorrectly formatted RIP packet was received." ::= {ripSysEntry 3} -- SAP System Table -- This table contains an entry for each instance of SAP -- running on the system. sapSysTable OBJECT-TYPE SYNTAX SEQUENCE OF SAPSysEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The SAP system table." ::= {ripsapSystem 2} sapSysEntry OBJECT-TYPE SYNTAX SAPSysEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry corresponds to one instance of SAP running on the system." INDEX {sapSysInstance} ::= {sapSysTable 1} SAPSysEntry ::= SEQUENCE { sapSysInstance INTEGER, sapSysState INTEGER, sapSysIncorrectPackets Counter } sapSysInstance OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The unique identifier of the instance of SAP to which this row corresponds. This value links the instance of SAP to an instance of IPX running on the system (i.e. the value of SApSysInstance should be the same as a value of ipxSysInstance). This value may be written only when creating a new entry in the table." ::= {sapSysEntry 1} sapSysState OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the operational state of this instance of SAP." ::= {sapSysEntry 2} sapSysIncorrectPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times that an incorrectly formatted SAP packet was received." ::= {sapSysEntry 3} -- Circuit Group -- This group contains RIP and SAP management information for each -- circuit known to this system. -- RIP Circuit Table -- The RIP Circuit table contains an entry for the RIP information for -- each circuit known to the system. ripCircTable OBJECT-TYPE SYNTAX SEQUENCE OF RIPCircEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The RIP Circuit table." ::= {ripsapCircuit 1} ripCircEntry OBJECT-TYPE SYNTAX RIPCircEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry corresponds to one circuit known to the system." INDEX { ripCircSysInstance, ripCircIndex } ::= {ripCircTable 1} RIPCircEntry ::= SEQUENCE { ripCircSysInstance INTEGER, ripCircIndex INTEGER, ripCircState INTEGER, ripCircPace INTEGER, ripCircUpdate INTEGER, ripCircAgeMultiplier INTEGER, ripCircPacketSize INTEGER, ripCircOutPackets Counter, ripCircInPackets Counter } ripCircSysInstance OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The unique identifier of the instance of RIP and IPX (via ipxSysInstance) to which this entry corresponds. This value may be written only when creating a new entry in the table." ::= {ripCircEntry 1} ripCircIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The identifier of this circuit, unique within the instance of RIP. This value corresponds to the circuit identifier found in ipxCircIndex. This value may be written only when creating a new entry in the table." ::= {ripCircEntry 2} ripCircState OBJECT-TYPE SYNTAX INTEGER { off(1), on(2), auto-on(3), auto-off(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether RIP information may be sent/received over this circuit." DEFVAL { auto-off } ::= {ripCircEntry 3} ripCircPace OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum pace, in packets per second, at which RIP packets may be sent on this circuit." ::= {ripCircEntry 4} ripCircUpdate OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The RIP periodic update interval, in seconds." DEFVAL { 60 } ::= {ripCircEntry 5} ripCircAgeMultiplier OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The holding multiplier for information received in RIP periodic updates." DEFVAL { 4 } ::= {ripCircEntry 6} ripCircPacketSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The RIP packet size used on this circuit." ::= {ripCircEntry 7} ripCircOutPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of RIP packets sent on this circuit." ::= {ripCircEntry 8} ripCircInPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of RIP packets received on this circuit." ::= {ripCircEntry 9} -- SAP Circuit Table -- The SAP Circuit table contains an entry for the SAP information for -- each circuit known to the system. sapCircTable OBJECT-TYPE SYNTAX SEQUENCE OF SAPCircEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The SAP Circuit table." ::= {ripsapCircuit 2} sapCircEntry OBJECT-TYPE SYNTAX SAPCircEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry corresponds to one circuit known to the system." INDEX { sapCircSysInstance, sapCircIndex } ::= {sapCircTable 1} SAPCircEntry ::= SEQUENCE { sapCircSysInstance INTEGER, sapCircIndex INTEGER, sapCircState INTEGER, sapCircPace INTEGER, sapCircUpdate INTEGER, sapCircAgeMultiplier INTEGER, sapCircPacketSize INTEGER, sapCircGetNearestServerReply INTEGER, sapCircOutPackets Counter, sapCircInPackets Counter } sapCircSysInstance OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The unique identifier of the instance of SAP and IPX (via ipxSysInstance) to which this entry corresponds. This value may be written only when creating a new entry in the table." ::= {sapCircEntry 1} sapCircIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The identifier of this circuit, unique within the instance of SAP. This value corresponds to the circuit identifier found in ipxCircIndex. This value may be written only when creating a new entry in the table." ::= {sapCircEntry 2} sapCircState OBJECT-TYPE SYNTAX INTEGER { off(1), on(2), auto-on(3), auto-off(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether SAP information may be sent/received over this circuit." DEFVAL { auto-off } ::= {sapCircEntry 3} sapCircPace OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum pace, in packets per second, at which SAP packets may be sent on this circuit." ::= {sapCircEntry 4} sapCircUpdate OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The SAP periodic update interval, in seconds." DEFVAL { 60 } ::= {sapCircEntry 5} sapCircAgeMultiplier OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The holding multiplier for information received in SAP periodic updates." DEFVAL { 4 } ::= {sapCircEntry 6} sapCircPacketSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The SAP packet size used on this circuit." ::= {sapCircEntry 7} sapCircGetNearestServerReply OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether to respond to SAP get nearest server requests received on this circuit." DEFVAL { yes } ::= {sapCircEntry 8} sapCircOutPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of SAP packets sent on this circuit." ::= {sapCircEntry 9} sapCircInPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of SAP packets received on this circuit." ::= {sapCircEntry 10} END