This is a purely informative rendering of an RFC that includes verified errata. This rendering may not be used as a reference.
The following 'Verified' errata have been incorporated in this document:
EID 7317
Network Working Group T. Goddard
Request for Comments: 4743 ICEsoft Technologies Inc.
Category: Standards Track December 2006
Using NETCONF over the Simple Object Access Protocol (SOAP)
Status of This Memo
This document specifies an Internet standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "Internet
Official Protocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of this memo is unlimited.
Copyright Notice
Copyright (C) The IETF Trust (2006).
Abstract
The Network Configuration Protocol (NETCONF) is applicable to a wide
range of devices in a variety of environments. Web Services is one
such environment and is presently characterized by the use of the
Simple Object Access Protocol (SOAP). NETCONF finds many benefits in
this environment: from the reuse of existing standards, to ease of
software development, to integration with deployed systems. Herein,
we describe SOAP over HTTP and SOAP over Blocks Exchange Extensible
Protocol (BEEP) bindings for NETCONF.
Table of Contents
1. Introduction ....................................................2
2. SOAP Background for NETCONF .....................................3
2.1. Use and Storage of WSDL and XSD ............................4
2.2. SOAP over HTTP .............................................4
2.3. HTTP Drawbacks .............................................4
2.4. BCP56: On the Use of HTTP as a Substrate ...................5
2.5. Important HTTP 1.1 Features ................................6
2.6. SOAP over BEEP .............................................7
2.7. SOAP Implementation Considerations .........................7
2.7.1. SOAP Feature Exploitation ...........................7
2.7.2. SOAP Headers ........................................7
2.7.3. SOAP Faults .........................................8
3. A SOAP Service for NETCONF ......................................9
3.1. Fundamental Use Case .......................................9
3.2. NETCONF Session Establishment ..............................9
3.3. NETCONF Capabilities Exchange ..............................9
3.4. NETCONF Session Usage .....................................11
3.5. NETCONF Session Teardown ..................................11
3.6. A NETCONF over SOAP Example ...............................11
3.7. NETCONF SOAP WSDL .........................................13
3.8. Sample Service Definition WSDL ............................14
4. Security Considerations ........................................15
4.1. Integrity, Privacy, and Authentication ....................15
4.2. Vulnerabilities ...........................................16
4.3. Environmental Specifics ...................................16
5. IANA Considerations ............................................17
6. References .....................................................17
6.1. Normative References ......................................17
6.2. Informative References ....................................18
1. Introduction
Given the use of Extensible Markup Language (XML) [2] and the remote
procedure call characteristics, it is natural to consider a binding
of the NETCONF [1] operations to a SOAP [3] application protocol.
This document proposes a binding of this form.
In general, SOAP is a natural messaging scheme for NETCONF,
essentially because of the remote procedure call character of both.
However, care must be taken with SOAP over HTTP as it is inherently
synchronous and client-driven. SOAP over BEEP [11] is technically
superior, but is not as widely adopted.
Four basic topics are presented: SOAP specifics of interest to
NETCONF, specifics on implementing NETCONF as a SOAP-based web
service, security considerations, and functional Web Services
Description Language (WSDL) definitions. In some sense, the most
important part of the document is the brief WSDL document presented
in Section 3.7. With the right tools, the WSDL combined with the
base NETCONF XML Schemas provides machine-readable descriptions
sufficient for the development of software applications using
NETCONF.
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC 2119 [8].
2. SOAP Background for NETCONF
Why introduce SOAP as yet another wrapper around what is already a
remote procedure call message? There are, in fact, both technical
and practical reasons. The technical reasons are perhaps less
compelling, but let's examine them first.
The use of SOAP does offer a few technical advantages. SOAP is
fundamentally an XML messaging scheme (which is capable of supporting
remote procedure call), and it defines a simple message format
composed of a "header" and a "body" contained within an "envelope".
The "header" contains meta-information relating to the message and
can be used to indicate such things as store-and-forward behaviour or
transactional characteristics. In addition, SOAP specifies an
optional encoding for the "body" of the message. However, this
encoding is not applicable to NETCONF as one of the goals is to have
highly readable XML, and SOAP-encoding is optimized instead for ease
of automated de-serialization. These benefits of the SOAP message
structure are simple, but worthwhile because they are already
standardized.
It is the practical reasons that truly make SOAP an interesting
choice for device management. It is not difficult to invent a
mechanism for exchanging XML messages over TCP, but what is difficult
is getting that mechanism supported in a wide variety of tools and
operating systems and having that mechanism understood by a great
many developers. SOAP over HTTP (with WSDL) is seeing good success
at this, and this means that a device management protocol making use
of these technologies has advantages in being implemented and
adopted. Admittedly, there are interoperability problems with SOAP
and WSDL, but such problems have wide attention and can be expected
to be resolved.
2.1. Use and Storage of WSDL and XSD
One of the advantages of using machine-readable formats (such as Web
Services Description Language (WSDL) [16] and XML Schemas [4]) is
that they can be used automatically in the software development
process. With appropriate tools, WSDL and XSD can be used to
generate classes that act as remote interfaces or
application-specific data structures. Other uses, such as document
generation and service location, are also common. A great innovation
found with many XML-based definition languages is the use of
hyperlinks for referring to documents containing supporting
definitions.
<import namespace="urn:ietf:params:xml:ns:netconf:base:1.0"
location="http://www.iana.org/assignments/xml-registry/
schema/netconf.xsd" />
For instance, in WSDL, the above import statement imports the
definitions of XML types and elements from the base NETCONF schema.
Ideally, the file containing that schema is hosted on a web server
under the authority of the standards body that defined the schema.
In this way, dependent standards can be built up over time, and all
are accessible to automated software tools that ensure adherence to
the standards. The IANA-maintained registry for this purpose is
described in "The IETF XML Registry" [13].
Note that WSDL declarations for SOAP over BEEP bindings are not yet
standardized.
2.2. SOAP over HTTP
Although SOAP focuses on messages and can be bound to different
underlying protocols such as HTTP, SMTP, or BEEP, most existing SOAP
implementations support only HTTP or HTTP/TLS.
There are a number of advantages to considering SOAP over protocols
other than HTTP, as HTTP assigns the very distinct client and server
roles by connection initiation. This causes difficulties in
supporting asynchronous notification and can be relieved in many ways
by replacing HTTP with BEEP.
2.3. HTTP Drawbacks
HTTP is not the ideal transport for messaging, but it is adequate for
the most basic interpretation of "remote procedure call". HTTP is
based on a communication pattern whereby the client (which initiates
the TCP connection) makes a "request" to the server. The server
returns a "response", and this process is continued (possibly over a
persistent connection, as described below). This matches the basic
idea of a remote procedure call where the caller invokes a procedure
on a remote server and waits for the return value.
Potential criticisms of HTTP could include the following:
o Server-initiated data flow is awkward to provide.
o Headers are verbose and text-based
o Idle connections may be closed by intermediate proxies
o Data encapsulation must adhere to Multipurpose Internet Mail
Extensions (MIME) [15].
o Bulk transfer relies on stream-based ordering.
In many ways, these criticisms are directed at particular compromises
in the design of HTTP. As such, they are important to consider, but
it is not clear that they result in fatal drawbacks for a device
management protocol.
2.4. BCP56: On the Use of HTTP as a Substrate
Best Current Practice 56 [6] presents a number of important
considerations on the use of HTTP in application protocols. In
particular, it raises the following concerns:
o HTTP may be more complex than is necessary for the application.
o The use of HTTP may mask the application from some firewalls.
o A substantially new service should not reuse port 80 as assigned
to HTTP.
o HTTP caching may mask connection state.
Fundamentally, these concerns lie directly with common usage of SOAP
over HTTP, rather than the application of SOAP over HTTP to NETCONF.
As BCP 56 indicates, it is debatable whether HTTP is an appropriate
protocol for SOAP at all, and it is likely that BEEP would be a
superior protocol for most SOAP applications. Unfortunately, SOAP
over HTTP is in common use and must be supported if the practical
benefits of SOAP are to be realized. Note that the verbose nature of
SOAP actually makes it more readily processed by firewalls, albeit
firewalls designed to process SOAP messages.
HTTP caches SHOULD NOT be inserted between NETCONF managers and
agents as NETCONF session state is tied to the state of the
underlying transport connection. Three defensive actions can be
taken:
o Caching MUST be prohibited through the use of HTTP headers Cache-
Control and Pragma: no-cache.
o HTTP proxies SHOULD NOT be deployed within the management network.
o Use HTTPS.
It is also possible to respond to the concern on the reuse of port
80. Any NETCONF SOAP service MUST always be supported over the new
standard port for NETCONF over SOAP, and all conforming
implementations MUST default to attempting connections over this new
standard port for NETCONF. A standard port for NETCONF over SOAP
(over HTTP) has been assigned in the IANA considerations of this
document.
2.5. Important HTTP 1.1 Features
HTTP 1.1 [5] includes two important features that provide for
relatively efficient transport of SOAP messages. These features are
"persistent connections" and "chunked transfer-coding".
Persistent connections allow a single TCP connection to be used
across multiple HTTP requests. This permits multiple SOAP request/
response message pairs to be exchanged without the overhead of
creating a new TCP connection for each request. Given that a single
stream is used for both requests and responses, it is clear that some
form of framing is necessary. For messages whose length is known in
advance, this is handled by the HTTP header "Content-length". For
messages of dynamic length, "Chunking" is required.
HTTP "Chunking" or "chunked transfer-coding" allows the sender to
send an indefinite amount of binary data. This is accomplished by
informing the receiver of the size of each "chunk" (substring of the
data) before the chunk is transmitted. The last chunk is indicated
by a chunk of zero length. Chunking can be effectively used to
transfer a large XML document where the document is generated on-line
from a non-XML form in memory.
In terms of its application to SOAP message exchanges, persistent
connections are clearly important for performance reasons and are
particularly important when the persistence of authenticated
connections is at stake. When one considers that messages of dynamic
length are the rule rather than the exception for SOAP messages, it
is also clear that Chunking is very useful. In some cases, it is
possible to buffer a SOAP response and determine its length before
sending, but the storage requirements for this are prohibitive for
many devices. Together, these two features provide a good foundation
for device management using SOAP over HTTP. HTTP chunking and
persistent connections [5] SHOULD be used.
2.6. SOAP over BEEP
Although not widely adopted by the Web Services community, BEEP is an
excellent substrate for SOAP [12]. In particular, it provides for
request/response message exchanges initiated by either BEEP peer and
allows the number of response messages to be arbitrary (including
zero). The BEEP profile for SOAP simply makes use of a single BEEP
channel for exchanging SOAP messages and benefits from BEEP's
inherent strengths for message exchange over a single transport
connection.
2.7. SOAP Implementation Considerations
It is not the goal of this document to cover the SOAP [3]
specification in detail. Instead, we provide a few comments that may
be of interest to an implementor of NETCONF over SOAP.
2.7.1. SOAP Feature Exploitation
NETCONF over SOAP does not make extensive use of SOAP features. For
instance, NETCONF operations are not broken into SOAP message parts,
and the SOAP header is not used to convey <rpc> metadata. This is a
deliberate design decision as it allows the implementor to provide
NETCONF over multiple substrates easily while handling the messages
over those different substrates in a common way.
2.7.2. SOAP Headers
Implementers of NETCONF over SOAP should be aware of the following
characteristic of SOAP headers: a SOAP header may have the attribute
"mustUnderstand", and, if it does, the recipient must either process
the header block or not process the SOAP message at all, and instead
generate a fault. A "mustUnderstand" header must not be silently
discarded.
In general, however, SOAP headers are intended for application-
specific uses. The NETCONF SOAP binding does not make use of SOAP
headers.
2.7.3. SOAP Faults
A SOAP Fault is returned in the event of a NETCONF <rpc-error>. It
is constructed essentially as a wrapper for the <rpc-error>, but it
allows SOAP processors to propagate the <rpc-error> to application
code using a language-appropriate exception mechanism.
A SOAP Fault is constructed from an <rpc-error> as follows: the SOAP
Fault Code Value is "Receiver" in the SOAP envelope namespace, the
SOAP Fault Reason Text is the contents of the NETCONF <rpc-error>
"error-tag", and the SOAP Fault detail is the original <rpc-error>
structure.
For instance, given the following <rpc-error>,
<rpc-error xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<error-type>rpc</error-type>
<error-tag>MISSING_ATTRIBUTE</error-tag>
<error-severity>error</error-severity>
<error-info>
<bad-attribute>message-id</bad-attribute>
<bad-element>rpc</bad-element>
</error-info>
</rpc-error>
the associated SOAP Fault message is
<soapenv:Envelope
xmlns:soapenv=
"http://www.w3.org/2003/05/soap-envelope"
xmlns:xml="http://www.w3.org/XML/1998/namespace">
<soapenv:Body>
<soapenv:Fault>
<soapenv:Code>
<soapenv:Value>env:Receiver</soapenv:Value>
</soapenv:Code>
<soapenv:Reason>
<soapenv:Text
xml:lang="en">MISSING_ATTRIBUTE</soapenv:Text>
</soapenv:Reason>
<detail>
<rpc-error xmlns=
"urn:ietf:params:xml:ns:netconf:base:1.0">
<error-type>rpc</error-type>
<error-tag>MISSING_ATTRIBUTE</error-tag>
<error-severity>error</error-severity>
<error-info>
<bad-attribute>message-id</bad-attribute>
<bad-element>rpc</bad-element>
</error-info>
</rpc-error>
</detail>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
3. A SOAP Service for NETCONF
3.1. Fundamental Use Case
The fundamental use case for NETCONF over SOAP is that of a
management console ("manager" role) managing one or more devices
running NETCONF agents ("agent" role). The manager initiates an HTTP
or BEEP connection to an agent and drives the NETCONF session via a
sequence of SOAP messages. When the manager closes the connection,
the NETCONF session is also closed.
3.2. NETCONF Session Establishment
A NETCONF over SOAP session is established by the initial message
exchange on the underlying substrate. For HTTP, a NETCONF session is
established once a SOAP message is POSTed to the NETCONF web
application URI. For BEEP, a NETCONF session is established once the
BEEP profile for SOAP handshake establishes the SOAP channel.
3.3. NETCONF Capabilities Exchange
Capabilities exchange and session ID establishment are performed
through the exchange of <hello> messages. In the case of SOAP over
HTTP, the HTTP client MUST send the first <hello> message. The case
of SOAP over BEEP imposes no ordering constraints. For instance, the
following example shows the exchange of <hello> messages and
establishes a session ID value of 4. Observe that the management
client initiates the exchange and the server agent assigns the
session ID.
C: POST /netconf HTTP/1.1
C: Host: netconfdevice
C: Content-Type: text/xml; charset=utf-8
C: Accept: application/soap+xml, text/*
C: Cache-Control: no-cache
C: Pragma: no-cache
C: Content-Length: 376
C:
C: <?xml version="1.0" encoding="UTF-8"?>
C: <soapenv:Envelope
C: xmlns:soapenv="http://www.w3.org/2003/05/soap-envelope">
C: <soapenv:Body>
C: <hello xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
C: <capabilities>
C: <capability>
C: urn:ietf:params:netconf:base:1.0
C: </capability>
C: </capabilities>
C: </hello>
C: </soapenv:Body>
C: </soapenv:Envelope>
S: HTTP/1.1 200 OK
S: Content-Type: application/soap+xml; charset=utf-8
S: Content-Length: 600
S:
S: <?xml version="1.0" encoding="UTF-8"?>
S: <soapenv:Envelope
S: xmlns:soapenv="http://www.w3.org/2003/05/soap-envelope">
S: <soapenv:Body>
S: <hello xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
S: <capabilities>
S: <capability>
S: urn:ietf:params:netconf:base:1.0
S: </capability>
S: <capability>
S: urn:ietf:params:netconf:capability:startup:1.0
S: </capability>
S: <capability>
S: http:/example.net/router/2.3/myfeature
S: </capability>
S: </capabilities>
S: <session-id>4</session-id>
S: </hello>
S: </soapenv:Body>
S: </soapenv:Envelope>
3.4. NETCONF Session Usage
NETCONF sessions are persistent for both performance and semantic
reasons. NETCONF session state contains the following:
1. Authentication Information
2. Capability Information
3. Locks
4. Pending Operations
5. Operation Sequence Numbers
Authentication must be maintained throughout a session due to the
fact that it is expensive to establish. Capability Information is
maintained so that appropriate operations can be applied during a
session. Locks are released upon termination of a session as this
makes the protocol more robust. Pending operations come and go from
existence during the normal course of remote procedure call (RPC)
operations. Operation sequence numbers provide the small but
necessary state information to refer to operations during the
session.
In the case of SOAP over HTTP, a NETCONF session is supported by an
HTTP connection with an authenticated user. For SOAP over BEEP, a
NETCONF session is supported by a BEEP channel operating according to
the BEEP profile for SOAP [12].
3.5. NETCONF Session Teardown
To allow automated cleanup, NETCONF over SOAP session teardown takes
place when the underlying connection (in the case of HTTP) or channel
(in the case of BEEP) is closed. Note that the root cause of such
teardown may be the closure of the TCP connection under either HTTP
or BEEP as the case may be. NETCONF managers and agents must be
capable of programatically closing the transport connections
associated with NETCONF sessions, such as in response to a
<close-session> operation; thus, the HTTP or BEEP substrate
implementation must expose this appropriately.
3.6. A NETCONF over SOAP Example
Since the proposed WSDL (in Section 3.7) uses document/literal
encoding, the use of a SOAP header and body has little impact on the
representation of a NETCONF operation. This example shows HTTP/1.1
for simplicity. An example for BEEP would be similar.
C: POST /netconf HTTP/1.1
C: Host: netconfdevice
C: Content-Type: text/xml; charset=utf-8
C: Accept: application/soap+xml, text/*
C: Cache-Control: no-cache
C: Pragma: no-cache
C: Content-Length: 465
C:
C: <?xml version="1.0" encoding="UTF-8"?>
C: <soapenv:Envelope
C: xmlns:soapenv="http://www.w3.org/2003/05/soap-envelope">
C: <soapenv:Body>
C: <rpc message-id="101"
C: xmlns="xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
C: <get-config>
C: <filter type="subtree">
C: <top xmlns="http://example.com/schema/1.2/config">
C: <users/>
C: </top>
C: </filter>
C: </get-config>
C: </rpc>
C: </soapenv:Body>
C: </soapenv:Envelope>
The HTTP/1.1 response is also straightforward:
S: HTTP/1.1 200 OK
S: Content-Type: application/soap+xml; charset=utf-8
S: Content-Length: 917
S:
S: <?xml version="1.0" encoding="UTF-8"?>
S: <soapenv:Envelope
S: xmlns:soapenv="http://www.w3.org/2003/05/soap-envelope">
S: <soapenv:Body>
S: <rpc-reply message-id="101"
S: xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
S: <data>
S: <top xmlns="http://example.com/schema/1.2/config">
S: <users>
S: <user>
S: <name>root</name>
S: <type>superuser</type>
S: <full-name>Charlie Root</full-name>
S: <company-info>
S: <dept>1</dept>
S: <id>1</id>
S: </company-info>
Notes:
The opening tags for <company-info> seem to be missing in the example.
S: </user>
S: <user>
S: <name>fred</name>
S: <type>admin</type>
S: <full-name>Fred Flintstone</full-name>
S: <dept>2</dept>
S: <id>2</id>
S: </company-info>
S: </user>
S: </users>
S: </top>
S: </data>
S: </rpc-reply>
S: </soapenv:Body>
S: </soapenv:Envelope>
3.7. NETCONF SOAP WSDL
<?xml version="1.0" encoding="UTF-8"?>
<definitions
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:SOAP="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:tns="urn:ietf:params:xml:ns:netconf:soap:1.0"
xmlns:netb="urn:ietf:params:xml:ns:netconf:base:1.0"
targetNamespace="urn:ietf:params:xml:ns:netconf:soap:1.0"
name="netconf-soap_1.0.wsdl">
<import namespace="urn:ietf:params:xml:ns:netconf:base:1.0"
location="http://www.iana.org/assignments/xml-registry/
schema/netconf.xsd" />
<message name="helloRequest">
<part name="in" element="netb:hello"/>
</message>
<message name="helloResponse">
<part name="out" element="netb:hello"/>
</message>
<message name="rpcRequest">
<part name="in" element="netb:rpc"/>
</message>
<message name="rpcResponse">
<part name="out" element="netb:rpc-reply"/>
</message>
<portType name="netconfPortType">
<operation name="rpc">
<input message="tns:rpcRequest"/>
<output message="tns:rpcResponse"/>
</operation>
<operation name="hello">
<input message="tns:helloRequest"/>
<output message="tns:helloResponse"/>
</operation>
</portType>
<binding name="netconfBinding" type="tns:netconfPortType">
<SOAP:binding style="document"
transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="hello">
<SOAP:operation/>
<input>
<SOAP:body use="literal"
namespace="urn:ietf:params:xml:ns:netconf:soap:1.0"/>
</input>
<output>
<SOAP:body use="literal"
namespace="urn:ietf:params:xml:ns:netconf:soap:1.0"/>
</output>
</operation>
<operation name="rpc">
<SOAP:operation/>
<input>
<SOAP:body use="literal"
namespace="urn:ietf:params:xml:ns:netconf:base:1.0"/>
</input>
<output>
<SOAP:body use="literal"
namespace="urn:ietf:params:xml:ns:netconf:base:1.0"/>
</output>
</operation>
</binding>
</definitions>
3.8. Sample Service Definition WSDL
The following WSDL document assumes a local location for the NETCONF
over SOAP WSDL definitions. A typical deployment of a device
manageable via NETCONF over SOAP would provide a service definition
similar to the following to identify the address of the device.
<?xml version="1.0" encoding="UTF-8"?>
<definitions
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:SOAP="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:nets="urn:ietf:params:xml:ns:netconf:soap:1.0"
targetNamespace="urn:myNetconfService"
name="myNetconfService.wsdl">
<import namespace="urn:ietf:params:xml:ns:netconf:soap:1.0"
location="http://localhost:8080/netconf/
schema/netconf-soap_1.0.wsdl"/>
<service name="netconf">
<port name="netconfPort" binding="nets:netconfBinding">
<SOAP:address location="http://localhost:8080/netconf"/>
</port>
</service>
</definitions>
4. Security Considerations
NETCONF is used to access and modify configuration information, so
the ability to access this protocol should be limited to users and
systems that are authorized to view or modify the agent's
configuration data.
Because configuration information is sent in both directions, it is
not sufficient for just the client or user to be authenticated with
the server. The identity of the server should also be authenticated
with the client.
Configuration data may include sensitive information, such as user
names or security keys. So, NETCONF should only be used over
communications channels that provide strong encryption for data
privacy.
If the NETCONF server provides remote access through insecure
protocols, such as HTTP, care should be taken to prevent execution of
the NETCONF program when strong user authentication or data privacy
is not available.
The IANA assigned port SHOULD be used, as this provides a means for
efficient firewall filtering during possible denial-of-service
attacks.
4.1. Integrity, Privacy, and Authentication
The NETCONF SOAP binding relies on an underlying secure transport for
integrity and privacy. Such transports are expected to include TLS
[9] (which, when combined with HTTP, is referred to as HTTPS) and
IPsec. There are a number of options for authentication (some of
which are deployment-specific):
o within the transport (such as with TLS client certificates)
o within HTTP (such as Digest Access Authentication [7])
o within SOAP (such as a digital signature in the header [17])
HTTP, BEEP, and SOAP level authentication can be integrated with
Remote Authentication Dial-In User Service (RADIUS) [10] to support
remote authentication databases.
At a miniumum, all conforming NETCONF over SOAP implementations MUST
support TLS. Specifically, NETCONF over SOAP over HTTP MUST support
NETCONF over SOAP over HTTPS, and NETCONF over SOAP over BEEP MUST
support NETCONF over SOAP over BEEP over TLS.
4.2. Vulnerabilities
The above protocols may have various vulnerabilities, and these may
be inherited by NETCONF over SOAP.
NETCONF itself may have vulnerabilities because an authorization
model is not currently specified.
It is important that device capabilities and authorization remain
constant for the duration of any outstanding NETCONF session. In the
case of NETCONF, it is important to consider that device management
may be taking place over multiple substrates (in addition to SOAP),
and it is important that the different substrates have a common
authentication model.
4.3. Environmental Specifics
Some deployments of NETCONF over SOAP may choose to use transports
without encryption. This presents vulnerabilities but may be
selected for deployments involving closed networks or debugging
scenarios.
A device managed by NETCONF may interact (over protocols besides
NETCONF) with devices managed by other protocols, all of differing
security. Each point of entry brings with it a potential
vulnerability.
5. IANA Considerations
IANA assigned TCP port (833) for NETCONF over SOAP over BEEP, and TCP
port (832) for NETCONF over SOAP over HTTPS.
IANA will allow for the assignment of an XML namespace within the
NETCONF namespace "urn:ietf:params:xml:ns:netconf" for the NETCONF
over SOAP WSDL definitions. Following the policies outlined in RFC
2434 [14], assigned values in this subordinate namespace are
requested to be allocated according to the "Specification Required"
policy.
URI: urn:ietf:params:xml:ns:netconf:soap
6. References
6.1. Normative References
[1] Enns, R., Ed., "NETCONF Configuration Protocol", RFC 4741,
December 2006.
[2] Bray, T., Paoli, J., Sperberg-McQueen, C., and E. Maler,
"Extensible Markup Language (XML) 1.0 (Second Edition)", W3C
REC REC-xml-20001006, October 2000,
<http://www.w3.org/TR/2000/REC-xml-20001006>.
[3] Gudgin, M., Hadley, M., Moreau, JJ., and H. Nielsen, "SOAP
Version 1.2 Part 1: Messaging Framework", W3C
Recommendation REC-soap12-part1-20030624, June 2002,
<http://www.w3.org/TR/soap12-part1/>.
[4] Thompson, H., Beech, D., Maloney, M., and N. Mendelsohn, "XML
Schema Part 1: Structures", W3C Recommendation REC-xmlschema-
1-20010502, May 2001,
<http://www.w3.org/TR/2001/REC-xmlschema-1-20010502/>.
[5] Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L.,
Leach, P., and T. Berners-Lee, "Hypertext Transfer Protocol --
HTTP/1.1", RFC 2616, June 1999.
[6] Moore, K., "On the use of HTTP as a Substrate", RFC 3205,
February 2002.
[7] Franks, J., Hallam-Baker, P., Hostetler, J., Leach, P.,
Luotonen, A., Sink, E., and L. Stewart, "HTTP Authentication:
Basic and Digest Access Authentication", RFC 2617, June 1999.
[8] Bradner, S., "Key words for use in RFCs to Indicate Requirement
Levels", RFC 2119, March 1997.
[9] Dierks, T. and E. Rescorla, "The Transport Layer Security (TLS)
Protocol Version 1.1", RFC 4346, April 2006.
[10] Rigney, C., Willens, S., Rubens, A., and W. Simpson, "Remote
Authentication Dial In User Service (RADIUS)", RFC 2865,
June 2000.
[11] Rose, M., "The Blocks Extensible Exchange Protocol Core",
RFC 3080, March 2001.
[12] O'Tuathail, E. and M. Rose, "Using the Simple Object Access
Protocol (SOAP) in Blocks Extensible Exchange Protocol (BEEP)",
RFC 4227, January 2006.
[13] Mealling, M., "The IETF XML Registry", RFC 3688, January 2004.
[14] Alvestrand, H. and T. Narten, "Guidelines for Writing an IANA
Considerations Section in RFCs", RFC 2434, October 1998.
6.2. Informative References
[15] Freed, N. and N. Borenstein, "Multipurpose Internet Mail
Extensions (MIME) Part One: Format of Internet Message Bodies",
RFC 2045, November 1996.
[16] Christensen, E., Curbera, F., Meredith, G., and S. Weerawarana,
"Web Services Description Language (WSDL) 1.1", W3C Note NOTE-
wsdl-20010315, March 2001,
<http://www.w3.org/TR/2001/NOTE-wsdl-20010315>.
[17] Brown, A., Fox, B., Hada, S., LaMacchia, B., and H. Maruyama,
"SOAP Security Extensions: Digital Signature", W3C Note NOTE-
SOAP-dsig-20010206, Feb 2001,
<http://www.w3.org/TR/SOAP-dsig/>.
Author's Address
Ted Goddard
ICEsoft Technologies Inc.
Suite 300, 1717 10th St. NW
Calgary, AB T2M 4S2
Canada
Phone: (403) 663-3322
EMail: ted.goddard@icesoft.com
URI: http://www.icesoft.com
Full Copyright Statement
Copyright (C) The IETF Trust (2006).
This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors
retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST,
AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT
THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at
ietf-ipr@ietf.org.
Acknowledgement
Funding for the RFC Editor function is currently provided by the
Internet Society.