Network Working Group K. Nichols Internet-Draft Pollere LLC Intended status: Informational V. Jacobson Expires: 12 January 2023 UCLA R. King Operant Networks Inc. 11 July 2022 Defined-Trust Transport (DeftT) Protocol for Limited Domains draft-nichols-tsv-defined-trust-transport-00 Abstract This document describes a broadcast-friendly, many-to-many Defined- trust Transport (DeftT) that makes it simple to express and enforce application and deployment specific integrity, authentication, access control and behavior constraints directly in the protocol stack. DeftT combined with IPv6 multicast and modern hardware-based methods for securing keys and code provides an easy to use foundation for secure and efficient communications in Limited Domains (RFC8799), in particular for Operational Technology (OT) networks. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on 12 January 2023. Copyright Notice Copyright (c) 2022 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/ license-info) in effect on the date of publication of this document. Nichols, et al. Expires 12 January 2023 [Page 1] Internet-Draft Defined-Trust Transport (DeftT) July 2022 Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1. Environment and use . . . . . . . . . . . . . . . . . . . 4 1.2. Transporting information . . . . . . . . . . . . . . . . 5 1.3. Securing information . . . . . . . . . . . . . . . . . . 7 1.4. Current status . . . . . . . . . . . . . . . . . . . . . 9 2. Terms and Definitions . . . . . . . . . . . . . . . . . . . . 9 3. DeftT and Defined-trust Communications . . . . . . . . . . . 11 3.1. DeftT role in application communications . . . . . . . . 12 3.2. Information movement is based on trust rules . . . . . . 13 3.3. Relays extend a trust domain . . . . . . . . . . . . . . 14 3.4. DeftT and congestion control . . . . . . . . . . . . . . 15 3.5. Defined-trust management . . . . . . . . . . . . . . . . 16 3.5.1. About trust schemas . . . . . . . . . . . . . . . . . 16 3.5.2. A language for DeftT trust schemas . . . . . . . . . 18 3.6. DC certificates and identity bundles . . . . . . . . . . 21 3.6.1. About DC certificates . . . . . . . . . . . . . . . . 21 4. Use Cases . . . . . . . . . . . . . . . . . . . . . . . . . . 23 4.1. Secure Industrial IoT . . . . . . . . . . . . . . . . . . 23 4.2. Secure access to Distributed Energy Resources (DER) . . . 25 5. Security Considerations . . . . . . . . . . . . . . . . . . . 27 6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 29 7. Normative References . . . . . . . . . . . . . . . . . . . . 29 8. Informative References . . . . . . . . . . . . . . . . . . . 30 Appendix A. DeftT run-time modules . . . . . . . . . . . . . . . 36 A.1. Syncps set reconciliation . . . . . . . . . . . . . . . . 37 A.2. SchemaLib trust management . . . . . . . . . . . . . . . 38 A.3. Signature managers . . . . . . . . . . . . . . . . . . . 38 A.4. Distributors . . . . . . . . . . . . . . . . . . . . . . 39 A.5. Faces . . . . . . . . . . . . . . . . . . . . . . . . . . 40 A.6. Shims . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Appendix B. Formats . . . . . . . . . . . . . . . . . . . . . . 42 B.1. Publications . . . . . . . . . . . . . . . . . . . . . . 42 B.2. Certificates . . . . . . . . . . . . . . . . . . . . . . 44 B.3. cState . . . . . . . . . . . . . . . . . . . . . . . . . 44 B.4. cAdd . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Appendix C. Contributors . . . . . . . . . . . . . . . . . . . . 46 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 47 Nichols, et al. Expires 12 January 2023 [Page 2] Internet-Draft Defined-Trust Transport (DeftT) July 2022 1. Introduction Decades of success in providing IP connectivity over any physical media ("IP over everything") has commoditized IP-based communications. This makes IP an attractive option for Internet of Things (IoT), Industrial IoT (IIoT) and Operational Technologies (OT) applications like building automation, embedded systems and transportation control, that previously required proprietary or analog connectivity. For the energy sector in particular, the growing use of Distributed Energy Resources (DER) like residential solar has created interest in low cost commodity networked devices but with added features for security, robustness and low-power operation [MODOT][OPR][CIDS]. Other emerging uses include connecting controls and sensors in nuclear power plants and carbon capture monitoring. [DIGN][IIOT] While moving to an IP network layer is a major advance for OT, current Internet transport options are a poor match to its needs. TCP generalized the Arpanet transport notion of a packet "phone call" between two endpoints into a generic, reliable, bi-directional bytestream working over IP's stateless unidirectional best-effort delivery model. Just as the voice phone call model spawned a global voice communications infrastructure in the 1900s, TCP/IP's two-party data "phone calls" are the foundation of today's global data communication infrastructure. But "good for global communication" isn't the same as "good for everything". OT applications tend to be localized and communication intensive (devices such as sensors only exist to communicate). Since OT's function is coordination and control, communication is many-to-many, not two-party. As Section 1.2 notes, implementing many-many over two-party changes the configuration burden and traffic scaling from the native media's O(_n_) to O(_n_^2). Also, OT devices have specific, highly prescribed roles with strict constraints on "who can say what to which". The opacity of modern encrypted two-party connections can make it impossible to enforce or even audit these constraints. Nichols, et al. Expires 12 January 2023 [Page 3] Internet-Draft Defined-Trust Transport (DeftT) July 2022 This memo describes a new, open transport protocol, Defined-trust Transport (DeftT) for Limited Domains [RFC8799] in which multipoint communications are enabled through use of a named collection abstraction and secured by an integrated trust management engine. DeftT employs multicast (specifically IPv6 link-local[RFC4291]), distributed set reconciliation PDU transport, a flexible application- level pub/sub, and a declarative language used to define the local context and communication constraints of a deployment. The language is compiled into a compact, optimized _trust schema_ used by DeftT's runtime trust management engine to enforce adherence to the constraints. The resulting system is both efficient and scalable: Signing and validation costs are constant per-publication, independent of the richness and complexity of the deployment's constraints or the number of entites deployed. Device enrollment consists of securely configuring a device with one or more _identity bundles_, each containing a signing (identity) certificate plus secret key together with all the certs in the identity's signing chain and the trust schema that governs what the identity can say and hear. All signing chains share a common trust root so the bundle suffices for the device to authenticate and authorize communication from peers and vice-versa. Thus new entities can be added without changes to the existing members and, since an OT system's "who says what to which" communication patterns are constraints, the trust schema can subsume all the labor intensive and error-prone device-to-device association configuration. 1.1. Environment and use Due to physical deployment constraints and the high cost of wiring, OT networks overwhelmingly prefer radio as a communication medium. Use of wires is impossible in many installations (untethered Things, adding smart devices to home and infrastructure networks, vehicular uses, etc.). Wiring costs far exceed the cost of current System-on- Chip Wi-Fi IoT devices and the cost differential is increasing [WSEN][COST]. For example, the popular ESP32 is a 32bit/320KB SRAM RISC with 60 analog and digital I/O channels plus complete 802.11b/g/ n and bluetooth radios on a 5mm die that consumes 70uW in normal operation. It costs $0.13 in small quantities while the estimated cost of pulling cable to retrofit nuclear power plants is $2000/ft [NPPI]. OT communications are frequently local with a many-to-many communication pattern using application-specific identifiers ("topics") for rendezvous. This fits the generic Publish/Subscribe communications model and, as table 1 in [PRAG] shows, nine of the eleven most widely used IoT protocols use a topic-based pub/sub transport. For example MQTT, an open standard developed in 1999 to Nichols, et al. Expires 12 January 2023 [Page 4] Internet-Draft Defined-Trust Transport (DeftT) July 2022 monitor oil pipelines over satellite [MQTT][MHST], is now probably the most widely used IoT protocol (https://mqtt.org/use-cases/ (https://mqtt.org/use-cases/)). In addition to providing local pub/ sub in buildings, factories and homes, Microsoft Azure, Amazon AWS, Google Cloud, and Cloudflare all offer hosted MQTT brokers for collecting and connecting sensor and control data. Pub/sub protocols are not connection or session oriented but instead organized around publishing and subscribing to topics. To communicate, publishers and subscribers need to use the same topic but need no knowledge of one another. IoT pub/sub is typically implemented as an application layer protocol over an Internet transport like TCP or TLS. These endpoint-based transport protocols do require in-advance configuration of peer addresses and credentials at each endpoint. 1.2. Transporting information The smart lighting example of Figure 1 shows a topic-based publish/ subscribe application layer protocol and a wireless broadcast domain. Each switch is set up to do triple-duty: one click of its on/off paddle controls some particular light(s), two clicks control all the lights in the room, and three clicks control all available lights (five kitchen plus the four den ceiling). Thus a switch button push may require a message to as many as nine light devices. On a broadcast physical network each message published by the switch is heard by all nine devices. IPv6 multicast provides a network layer that can take advantage of this but current IP transport protocols cannot. Instead, each switch needs to establish nine transport associations in order to send the published message for all lights to turn on. Communicating devices must be configured with each other's IP address and enrolled identity so, for _n_ devices, both the configuration burden and traffic scale as O(_n^2_). For example, when an "_all_" event is triggered, every light's radio will receive nine messages but discard the eight determined to be "not mine." If a device sleeps, is out-of-range, or has partial connectivity, additional application-level mechanisms have to be implemented to accommodate it. (Artwork only available as svg: iotDeftt-rfc.svg) Figure 1: Smart lighting use of Pub/Sub MQTT and other broker-based pub/sub approaches mitigate this by adding a _broker_ where all transport connections terminate (Figure 2). Each entity makes a single TCP transport connection with the broker and tells the broker the topics to which it subscribes. Thus the kitchen switch uses its single transport session to publish Nichols, et al. Expires 12 January 2023 [Page 5] Internet-Draft Defined-Trust Transport (DeftT) July 2022 commands to topic kitchen/counter, topic kitchen or all. The kitchen counter light uses its broker session to subscribe to those same three topics. The kitchen ceiling lights subscribe to topics kitchen ceiling, kitchen and all while den ceiling lights subscribe to topics den ceiling, den and all. The broker reduces the configuration burden from O(_n_^2) to O(_n_): 18 transport sessions to 11 for this simple example but for realistic deployments the reduction is often greater. There are other advantages: besides their own IP addresses and identities, devices only need to be configured with those of the broker. Further, the broker can store messages for temporarily unavailable devices and use the transport session to confirm the reception of messages. This approach is popular because the pub/sub application layer protocol provides an easy-to-use API and the broker reduces configuration burden while maintaining secure, reliable delivery and providing short-term in-network storage of messages. Still the broker implementation doubles the per-device configuration burden by adding an entity that exists only to implement transport and traffic still scales as O(_n^2_). E.g., any switch publishing to all lights results in ten (unicast) message transfers over the wifi network. (Artwork only available as svg: iotMQTT-rfc.svg) Figure 2: Brokers enable Pub/Sub over connection/session protocols A transport protocol not organized around bilateral associations ("connections") would better suit this problem. In the distributed systems literature, communication associated with coordinating shared objectives has long been modeled by the mathematics of distributed set reconciliation. In this approach, the domain of discourse is some named set, e.g., _myhouse.iot_, the event created by a button press on a switch is added as a new object to the instance of _myhouse.iot_ at its point of origin, then the reconciliation process ensures that every entity holding _myhouse.iot_ has the same set of objects by propagating this new object. Recent progress in distributed set reconciliation via Invertible Bloom Lookup Tables (IBLTs) [DIFF][IBLT][MPSR] enables solution of this problem by a simple, efficient multicast transport. DeftT implements IBLT set reconciliation and takes advantage of IPv6's ability to use link local multicast without requiring manual configuration or a routing agent, yielding Figure 1 where each device has a single, auto- configured transport that makes use of the broadcast radio medium without need for a broker or multiple transport associations. Each button push is broadcast exactly once to be added to the distributed set. Nichols, et al. Expires 12 January 2023 [Page 6] Internet-Draft Defined-Trust Transport (DeftT) July 2022 1.3. Securing information In addition to reliability, current transport protocols provide some security via encrypting the sessions between end points. In the Internet, trust in the credentials of an endpoint (e.g., a website) is usually attested by a third party certificate authority (CA) and is bound to a DNS name. Each secure transport association requires the exchange of these credentials. Instead of third party certificates, OT tends to prefer locally created certificates, configuring them into on-device trusted enclaves [TPM][HSE][ATZ] as part of the device enrollment process. Thus, a transport for OT should work with a local root of trust. In Figure 2 each connection is a separate security association where each device needs to validate the broker's credential and the broker has to validate each device's (the validity check usually involves cryptographic verification of a signature chain terminating on a common trust root). This approach ensures that transport associations are between two enrolled devices (protecting against outsider and some MITM attacks) and allows for secure exchange of a nonce symmetric key that can be used to ensure transport privacy. However, once transport has been established there are no constraints whatsoever on what devices can say. Thus this type of security does not protect against the insider attacks that currently plague OT, e.g., [CHPT] description of a lightbulb taking over a network. Hardening an OT system against these attacks requires trust management operating at the individual publication level, not the connection or session level. For example, the basic function of a light switch requires that it be allowed to tell a light to turn on or off but it almost certainly shouldn't be allowed to tell the light to overwrite its firmware (fwupd), even though "on/off" and "fwupd" are both standard capabilities of most smart light APIs. Once the session is established, its security handles the "fwupd" publications the same way as the "on/off" publications. Per-publication trust decisions can enable the fwupd from the light switch to be rejected. The requirement for per-publication trust decisions combined with OT's preponderance of many-to-many communications over broadcast infrastructure suggests that per-publication signing is preferable to session-based signing. Securing each publication rather than the path it arrives on deals with a wider spectrum of threats while avoiding the quadratic session state and traffic burden. This results in a trust management system such as [DLOG] where each publisher is responsible for supplying all of the "who/what/where/ when" information needed for each subscriber to _prove_ the publication complies with system policies. If, as described in [DLOG], the system's trust requirements are expressed using a _declarative_ framework, they can be validated for consistency and completeness then converted to a compact runtime form which can be Nichols, et al. Expires 12 January 2023 [Page 7] Internet-Draft Defined-Trust Transport (DeftT) July 2022 authorized and secured via signing with the system trust anchor, then distributed, validated and updated using the same mechanisms used for identity certificates. This trust schema can be used both to construct and validate publications, guaranteeing that _all_ parts of the system _always_ conform to and enforce the same rules, even as those rules evolve to meet new threats. OT communication maps well to pub/sub because it consists of independent messages that, due to interoperability requirements, conform to rigid standards on syntax and semantics [IEC61850][ISO9506MMS][ONE][MATR][OSCAL][NMUD][ST][ZCL]. Using conventional session-based transports combines these independent publications under a single session key. Moving to a publication- based transport makes it possible to embed the trust management mechanism described above directly in the publish and subscribe data paths as shown below: (Artwork only available as svg: trustElements-rfc.svg) Figure 3: Trust management elements of DeftT. This style of trust management extends LangSec's [LANG] "be definite in what you accept" principle by using the authenticated common ruleset for belt-and-suspenders enforcement by both ends of the transport: If the trust schema shows the publication builder it doesn't have the credentials needed to produce a valid publication, an error is thrown and nothing is published. Independently, if the publication validator doesn't have a locally validated, complete signing chain for the credential that signed some pub, the schema shows the signing chain isn't appropriate to the pub, or the pub's signature doesn't validate, the pub is ignored. Since an app's subscriptions determine the pubs it will see, only certs of chains that sign pubs matching the subscriptions need to be validated or retained. Thus a device's communication state burden and computation costs are a function of how many different things are allowed to talk to it but not how many things it talks to or the total number of devices in the system. In particular, event driven, publish-only devices like sensors spend no time or space on validation. And, unlike most 'secure' systems, adding additional trust schema constraints to reduce attack surface results in devices doing _less_ work. Nichols, et al. Expires 12 January 2023 [Page 8] Internet-Draft Defined-Trust Transport (DeftT) July 2022 The particular rules for any deployment are application-specific (e.g., Is it home IoT or a nuclear power plant?) and site-specific (specific form of credential and idiosyncrasies in rules) which DeftT accommodates by being invoked with a ruleset particular for a deployment. We anticipate that the efforts to create common data models for specific sectors will lead to easier and more forms-based configuration of DeftT deployments. 1.4. Current status An open-source Defined-trust Communications Toolkit [DCT] with a reference implementation of DeftT is maintained by the corresponding author's company, Pollere. Pollere is also working on home IoT uses. Massive build out of the renewable energy sector is driving connectivity needs for both monitoring and control. Author King's company, Operant, is currently developing extensions of DeftT in a mix of open-source and proprietary software tailored for commercial deployment in support of distributed energy resources (DER). Current small scale use cases have performed well and expanded usage is planned. Pollere and Operant welcome collaborators with problems suitable for DeftT. [DCT] has examples of using DeftT to implement secure brokerless message-based pub/sub using UDP/IPv6 multicast and unicast UDP/TCP and include extending a trust domain via a unicast connection or between two broadcast domains. As the needs of our use cases expand, the Defined-trust Communications (DC) architecture will evolve. Working implementations and performance improvements are occasionally added to the repository. This reflects the development philosophy of DC to start from solving useful problems with a well-defined scope and extend from there. DeftT's reference implementation code is open-source, as befits any communications protocol, but even more critical for one attempting to offer security. DCT itself makes use of the open-source cryptographic library libsodium [SOD] and the project is open to feedback on potential security issues. 2. Terms and Definitions The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. * DC: Defined-trust Communications * Defined-trust transport (DeftT): the transport protocol of DC Nichols, et al. Expires 12 January 2023 [Page 9] Internet-Draft Defined-Trust Transport (DeftT) July 2022 * DCT: Defined-trust Communications Toolkit. Running code, examples and documentation for DC tools, a trust schema language and compiler, a DeftT implementation, and illustrative examples * trust schema: defined set of rules that cover the communications for a particular application domain. Where it is necessary to distinguish between the human readable version and the compiled binary version, the modifiers "readable" or "binary" will be used. The binary version is placed in a certificate signed by a trust anchor. * trust anchor: NIST SP 800-57 Part 1 Rev. 5 definition "An authoritative entity for which trust is assumed. In a PKI, a trust anchor is a certification authority, which is represented by a certificate that is used to verify the signature on a certificate issued by that trust-anchor. The security of the validation process depends upon the authenticity and integrity of the trust anchor's certificate. Trust anchor certificates are often distributed as self-signed certificates." In DCF, a trust anchor is a self-signed certificate which is the ultimate signer of all certificates in use in a trust domain, including the trust schema. From RFC4949: trust anchor definition: An established point of trust (usually based on the authority of some person, office, or organization) from which a certificate user begins the validation of a certification chain. * trust domain (TD): a zero trust network governed by a single trust anchor and trust schema which is enforced at run-time by a library using a signed binary copy of the trust schema at each member entity. Nothing is accepted without validation; non-conforming communications are silently discarded. As the trust schema cert is signed by the trust anchor, the trust schema cert's thumbprint uniquely identifies a trust domain. * signing identity: a unique signing certificate of a particular entity that is the leaf of a certificate chain that terminates in the local root of trust. Certificates in the chain contain role and capability information thus signing identities are distributed with their chain-of-trust * capabilities: certificates that contain attributes of a signing identity and are part of the identity's chain-of-trust as defined in a trust schema * certificate thumbprint: the 32 byte SHA256 digest of the entire signing cert including its signature ensuring that each thumbprint resolves to one and only one cert and signing chain * identity bundle - entities in a trust zone are commissioned with an identity bundle of trust anchor, signed trust schema, and the signing certs associated with a particular identity * protocol data unit (PDU): (following the wikiPedia definition) a single unit of information transmitted among peer entities of a computer network composed of protocol-specific control information and user data Nichols, et al. Expires 12 January 2023 [Page 10] Internet-Draft Defined-Trust Transport (DeftT) July 2022 * Publication: a named information object exchanged used by DeftT where name structure and the required identity roles and capabilities for Publications are specified by the trust schema. Publications are the elements of sets that are reconciled by DeftT's sync protocol. (Capitalization is used to distinguish this specific use from both the action and more generic use of the term.) * sync zone: a trust domain, or subdomain, on a single subnet. A sync zone comprises all the sync collections that DeftTs with a particular trust schema participate in on a single subnet (e.g., pubs, cert, keys) * sync protocol: a protocol that implements the set reconciliation of Publications making use of cState and cAdd PDUs * collection: a set of elements denoted by structured names including the identifier of a particular trust schema * cState: (from "collection state") * cAdd: (from "collection additions") * Face: maintains tables of DeftT's cState PDUs to manage efficient communications with the system transport in use (UDP multicast, TCP, etc.) * trust-based relay: a special-purpose entity that connects a trust domain across different subnets * Things: as per [RFC8520], networked digital devices specifically not intended to be used for general purpose computing 3. DeftT and Defined-trust Communications DeftT synchronizes and secures communications between enrolled entities of a Limited Domain [RFC8799]. Like QUIC, DeftT is a user- space transport protocol that sits between an application and a system-provided transport like UDP. DeftT's set reconciliation communication model contrasts with the bilateral communication model of TCP or QUIC where a source and a destination coordinate with one another to transport information. DeftT collections (sets) are denoted by structured names including the identifier of a particular trust schema. Communicating DeftTs may hold different subsets of the collection at any time (e.g., immediately after entities add elements to the collection) but the protocol ensures they all converge to holding the complete set of elements within a few round-trip-times following the changes. Nichols, et al. Expires 12 January 2023 [Page 11] Internet-Draft Defined-Trust Transport (DeftT) July 2022 3.1. DeftT role in application communications DeftT's security enforces "who can say what to which" as well as providing required integrity, authenticity and confidentiality. Applications use DeftT to add to and access from a distributed collection of Publications. Transparently to applications, a DeftT instance both constructs and validates all Publications against a set of formal, validated rules. Each new DeftT is configured with these rules in certificate form along with a signing chain that includes its private signing identity and has the same root of trust as the certificate of trust rules. A DeftT is identified by its signing identity and the role and capabilities in that identity's signing chain. Each DeftT must add its credentials (signing chain) to a certificate collection prior to adding publications to the collection. DeftT validates credentials as a chain of trust against the shared trust rules and does not accept Publications without a fully validated signer identity. Communicating DeftTs must be in the same _trust domain_ (TD), i.e., identities derive from the same root of trust and follow an identical trust schema. Using this shared set of rules, DeftT provides fully distributed policy enforcement for the TD without relying on a secured-perimeter physical network and/or extensive per-device configuration. Trust schemas are distributed as a trust-root-signed certificate and that certificate's thumbprint uniquely identifies a TD in DeftT PDUs. DeftT can share an IP network with non-DeftT traffic as well as DeftT traffic of a different TD. Privacy via AEAD PDU content encryption is automatically handled within DeftT. (Artwork only available as svg: ./transportBD0v2-rfc.svg) Figure 4: DeftT's external interaction in a network stack Figure 4 shows the data that flows in and out of a DeftT instance. An application-specific format is used for information exchanged with an application. DeftT uses its trust schema to turn this information into Publications that it adds to its set (_sync_ collection). DeftT implements two types of transport PDU, both broadcast on its subnet, that it uses to manage the set. One represents the _collection state_ (cState) of one or more DeftTs by an IBLT that contains all the Publications the DeftT currently has in its collection. The cState serves as a query for additional data that isn't reflected in its local state. The other PDU carries the _collection additions_ (cAdds) that are sent in response to a cState. Reception of a cAdd with new data responds to a particular cState so a receiving DeftT removes that cState as a pending query (it will be replaced with a new cState with the addition of the new items). DeftT requires and implements signing and validation of publications as well as the cAdd Nichols, et al. Expires 12 January 2023 [Page 12] Internet-Draft Defined-Trust Transport (DeftT) July 2022 PDUs that transport them. As these dynamics are exactly that of Named-Data Networking's Interest (cState) and Data (cAdd) packets, the DeftT reference implementation uses a restricted subset of that format for its PDUs along with its own broadcast-optimized Face protocol. (DeftT does not utilize a NDN forwarder or implement the full NDN protocol.) Any DeftT that is missing a Publication (due to being out-of-range or asleep, etc.) can receive it from any other DeftT. The reconciliation protocol will continue to send cAdds as long as cStates are received that don't contain some of their publications. This results in reliability that is subscriber-oriented, not publisher-oriented and is efficient for broadcast media, particularly with protocol features designed to prevent multiple redundant broadcasts. DeftT's reference implementation includes an efficient multicast-optimized approach. 3.2. Information movement is based on trust rules The Internet's transport and routing protocols emphasize universal reachability and packet forwarding is based on destination. A significant number of uses neither need nor desire to transit the Internet. For a wide class of OT applications, depending on the good sending practices of others while accepting packets has left critical applications open to misconfiguration and attacks. DC only moves its Publications if they follow trust rules, an approach that differs from Internet forwarding but offers new opportunities. DeftTs on the same subnet may not be in the same trust domain (TD) and DeftTs in the same TD may not be on the same subnet. In the former case, cState and cAdd PDUs of different TDs are differentiated by the trust domain id (thumbprint of the certificate holding the domain's trust rules) which can be used to determine whether or not to process a PDU. A particular sync zone is managed on a single subnet: cState and cAdds are not forwarded off that subnet. Trust- based _relays_ connect separate sync zones while preserving a trust domain for the publications. A relay is an application running on a device with a network interface on each subnet that has two or more DeftT instances. Each DeftT participates in a different sync zone and has a signing identity valid for its sync zone. Each subnet's DeftT uses the same trust rules to validate Publications and those that arrive via one DeftT are added to the collections of all other DeftTs of the relay (after validation). Only Publications are relayed between subnets and the Publication must match a trust rule in the DeftT's trust engine. (Note that cAdd encryption is unique per subnet/sync collection.) Nichols, et al. Expires 12 January 2023 [Page 13] Internet-Draft Defined-Trust Transport (DeftT) July 2022 3.3. Relays extend a trust domain Relay DeftTs use a special API module (a "shim", see Appendix A.6) that performs "pass-through" of valid Publications rather than creating Publications. The relay of Figure 5-left has three separate wireless subnets. If all three DeftTs use the same trust schema, a new validated cert added to the cert store of one DeftT is passed to the other two, which will validate it before adding to its own cert store (superfluous in this case, but not a lot of overhead for additional security). When a valid Publication is received by one DeftT, it is passed to the other two DeftTs to validate against their trust schema copies and published if it passes. (Artwork only available as svg: relayextend-rfc.svg) Figure 5: Relays connect subnets Relays can also connect subsets of a TD, either proper subsets or overlapping subsets. A relay may have different identities and trust schemas for each of its DeftT but must have the same trust anchor. Publications that are undefined for a particular DeftT will not pass its validation and will be silently discarded. This means the relay application of Figure 5-left can remain the same but Publications will only be published to a different subnet if its DeftT has that format in its ruleset. If the added efficiency of filtering Publications prior to validation checks is desired, a relay can be altered to limit subscriptions (a one-line change) on some DeftT(s) or may add code to filter Publications before passing to other DeftT(s). Figure 5-right shows extending a trust domain geographically by using a unicast connection (e.g., over a cell line or tunnel over the Internet) between two relays which also interface to local broadcast networks. Everything on each local network shows up on the other. A TD subset could be used here to limit the types of Publications sent on the remote link, e.g., logs or alerts. Using this approach in Figure 5-right, local communications for subnet 1 can be kept local while subnet 2 might send commands and/or collect log files from subnet 1. More generally, relays can form a mesh of broadcast networks with no additional configuration (i.e., relays on a broadcast network do not need to be configured with others' identities). The mesh is efficient: publications are only added to an individual DeftT's collection once regardless of how it is received. More on the applicability of DeftT meshes is in Section 4. Nichols, et al. Expires 12 January 2023 [Page 14] Internet-Draft Defined-Trust Transport (DeftT) July 2022 3.4. DeftT and congestion control Each DeftT instance manages its collection on a single broadcast subnet (since unicast is a proper subset of multicast, a point-to- point connection is viewed as a trivial broadcast subnet) thus only has to deal with that subnet's congestion. (As described in the previous section, a device connected to two or more subnets may create DeftT instances having the same collection name on each subnet with an app-level _publication_ relay between them but DeftT never forwards _PDUs_ between subnets. It is, of course, possible to run DeftT over an extended broadcast network like a PIM multicast group (or NDN NFD forwarding mesh?) but the result will generally require more configuration and be less reliable, efficient and secure than DeftT's self-configuring peer-to-peer relay mesh described in the previous section. DeftT will send _at most one_ copy of any publication over any subnet, _independent_ of the number of publishers and subscribers on the subnet. Thus the total DeftT traffic on a subnet is strictly upper bounded by the app-level publication rate. As described in Section 3.1, instances publish a cState specifying the set elements they currently hold. If an instance receives a cState specifying the same elements it holds, it doesn't send its cState. Thus the upper bound on cState publication rate is the number of peers on the subnet divided by the cState lifetime (typically seconds to minutes) but is typically one per cState lifetime due to the duplicate suppression. Each peer can send at most one cAdd in response to a cState. This creates a strict request/response flow balance which upper bounds the cAdd traffic rate to number of peers - 1 times the cState publication rate. The flow balance ensures an instance can't send a new cState until it's previous one is either obsoleted by a cAdd or times out. Similarly a cAdd can only be sent in response to the cState which it obsoletes. Thus the number of outstanding PDUs per instance is at most one and DeftT cannot cause subnet congestion collapse. If a relay is used to extend a TD over a path whose bandwidth delay product is many times larger than typical subnet MTUs (1.5-9KB), the one-outstanding-PDU per peer constraint can result in poor performance (1500 bytes per 100ms transcontinental RTT is only 120Kbps). DeftT can run over any lower layer transport and stream- oriented transports like TCP or QUIC allow for a 'virtual MTU' that can be set large enough for DeftT to relay at or above the average publication rate (the default is 64KB which can relay up to 5Mbps of publications into a 100ms RTT). In this case there can be many lower layer packets in flight for each DeftT PDU but their congestion control is handled by TCP or QUIC. Nichols, et al. Expires 12 January 2023 [Page 15] Internet-Draft Defined-Trust Transport (DeftT) July 2022 3.5. Defined-trust management OT applications are distinguished (from general digital communications) by well-defined roles, behaviors and relationships that constrain the information to be communicated. Structured abstract profiles characterize the capabilities and attributes of Things and can be machine-readable. Energy applications in particular have defined strict role-based access controls [IEC] though proposed enforcement approaches require interaction of a number of mechanisms across the communications stack [NERC]. These structured profiles and rules strictly define permitted behaviors including what types of messages can be issued or acted on; undefined behaviors should not be permitted. DC can incorporate these rules along with local configuration directly into the trust schemas used in DeftT's integrated trust management engine. This not only provides a fine-grained security but a highly _usable_ security, an approach that can make an application writer's job easier since applications do not need to contain local configuration and security considerations. DeftT's trust engine modules use trust schemas which are compiled into a binary format to become the content of a certificate signed by the trust domain's root of trust. The trust schema contains the defined rules that describe the format of PDUs and the specific roles and credentials that must be in the signing chain of entities that create them. Defined-trust Communications includes the use of trust schemas, a language for expressing the trust schemas, and the use of a compiler and other tools to create the credentials a DeftT needs at run-time to function in a particular TD. 3.5.1. About trust schemas Defined-trust communications formalizes the rules governing communications in _trust schemas_. Trust schemas grew out of early work in CCN [SNC] which in turn was partially based on the seminal SDSI [SDSI] approach to create user-friendly namespaces creating transitive trust through a certificate (cert) chain that validates locally controlled and managed keys, rather than requiring a global Public Key Infrastructure (PKI). Certificates are created that have a particular context in which they should be utilized and trusted rather than conferring total authority. [CRTMG] proposed using locally controlled and administered secure identities that were verifiable at each (routing) process to provide a key management structure for intradomain IP routing. Blaze et. al. [DTM] defined the term _trust management_ for the study of security policies, security credentials, and trust relationships. Li et. al. [DLOG] later refines some trust management concepts arguing that the expressive language for the rules should be declarative (as opposed Nichols, et al. Expires 12 January 2023 [Page 16] Internet-Draft Defined-Trust Transport (DeftT) July 2022 to the original work). This body of work influences that of trust schemas, which allow for specifying security rules based on application name structures. Trust schemas for Named-Data Networking were described by Yu et al [STNDN] as "an overall trust model of an application, i.e., what is (are) legitimate key(s) for each data packet that the application produces or consumes" and gave a general description of how trust schema rules might be used by an authenticating interpreter finite state machine to apply the rules to packets, only addressing validation. A new approach to both the trust schema language and the integration of trust schemas with applications was introduced in [NDNW], extended in [DNMP][DCT]. In this approach, a trust schema is analogous to the plans for constructing a building. Construction plans serve multiple purposes: 1. Allow permitting authorities to check that the design meets applicable codes 2. Show construction workers what to build 3. Let building inspectors validate that as-permitted matches as- built Construction plans get this flexibility from being declarative: they describe "what", not "how". As noted in p.4, a declarative trust management specification based on a formal foundation guarantees all parties to a communication have the same notion of what constitutes compliance. This allows a single schema to provide the same protection as dozens of manually configured, per-node ACL rules. This approach is a critical part of Defined-trust Communications and an implementation (VerSec) is included with the Defined-trust Communications Toolkit [DCT]. Versec includes a declarative schema specification language with a compiler that checks the formal soundness of a specification (case 1 above) then converts it to a signed, compact, binary form. The binary form is used by DeftT to build (case 2) or validate (case 3) the Publications of a sync collection. In the reference implementation [DCT], these objects are called "publications" and have names, content and signatures (using a restricted subset of NDN Data packets, covered in Appendix B). Certificates are a type of publication, allowing them to be distributed and validated using DeftT, but they are subject to many additional constraints (Section 3.6.1,Appendix B.2) that ensure DeftT's security framework is well-founded. Nichols, et al. Expires 12 January 2023 [Page 17] Internet-Draft Defined-Trust Transport (DeftT) July 2022 3.5.2. A language for DeftT trust schemas The language follows LangSec [LANG] principles to minimize misconfiguration and attack surface. It has a structure amenable to a forms-based input or a translator from structured data descriptions. Declarative languages are expressive and strongly typed, so they can express the constructs in these standards in the trust schema. Versec continues to evolve to add new features as we expand our application domains and the latest released version is at [DCT]. Other languages and compilers are possible as long as they supply the features and output needed for DeftT. Defined-trust Communications makes the rules of trust available to every entity. A trust schema expresses the intent for an application domain's communications in fine-grained rules: who can say what. Credentials that define "who" are specified along with complete definitions of "what". For application domains where the communicating entities share an administrative control, using a third party to certify identity is unnecessary and can introduce vulnerability. Defined-trust Communications is targeted at OT networking where administrative control is explicit and it is not unreasonable to assume that identities and trust rules are securely configured for every deployed entity. A trust schema details the meaning and relationship of individual components of the filename-like names (URI syntax RFC3986) of publications and certificates. A simple trust schema (Figure 6) defines a publication of this trust domain as #pub with a six component name. The strings between the slashes are the tags used to reference each component in the structure form and in the run-time schema library. An example of this usage is the component constraint following the "&" where ts is a timestamp (64-bit unix timepoints in microseconds) which will be set with the current time when a publication is created. The first component gets its value from the variable "domain." #pubPrefix is designated as this single component (though multiple components are permitted) so that the trust schema contains information on what part of the name is considered common prefix. The Figure 6 trust schema puts no constraints on other name components (not the usual case for OT applications) but does require that Publications of template #pub are signed by ("<=") a roleCert whose format and signing rule (signed by a netCert) is also defined. The "Validator" lines specify cryptographic signing and validation algorithms from DCT's run-time library for both the Publication and the cAdd PDU that carries Publications. Here, both use EdDSA signing. The trust domain defined by this schema has no constraints on the inner four name components (additional constraints could be imposed by the application but they won't be enforced by DeftT) but must sign all Publication using the EdDSA algorithm and the Nichols, et al. Expires 12 January 2023 [Page 18] Internet-Draft Defined-Trust Transport (DeftT) July 2022 Collection synchronization module must sign all cAdds using the EdDSA algorithm. Entity identity comes from a roleCert (including private key) which allows it to create legal communications. The signing certificate MUST adhere to the trust schema and Publications or cAdds with unknown signers are discarded. The timestamp component can be used to prevent replay attacks. DeftT is structured to add its identity (public) certs to a trust domain's certificate collection (see {#certificates)) when instantiated, making its identity available to all other entities in the trust domain. This approach means entities are not configured with identities of other members of a trust domain and new entities can join a trust domain at any time. #pub: /_domain/trgt/topic/loc/arg/_ts & { _ts: timestamp() } <= roleCert roleCert: _domain/_role/_roleId/_keyinfo <= netCert netCert: _domain/_keyinfo #pubPrefix: _domain #pubValidator: "EdDSA" #cAddValidator: "EdDSA" _domain: "example" _keyinfo: "KEY"/_/"dct"/_ Figure 6: An example trust schema To keep the trust schema both compact and secure, it is compiled into a binary format that is the content of a trust schema certificate. [DCT] contains a compiler (schemaCompile) that converts the text version (e.g. Figure 6) of the trust schema into a binary output file as well as diagnostic output (see Figure 7) used to confirm the intent of the trust rules (and which will flag problems). Entities are configured with the trust domain's trust anchor, the trust schema and their own identity in the trust domain. From these elements, any other TD member's credentials can be verified, so no entity has apriori knowledge of any other entity. Device configuration should be carried out using appropriate applicable best practices [TATT][DMR][IAWS][TPM][RFC8995]. Nichols, et al. Expires 12 January 2023 [Page 19] Internet-Draft Defined-Trust Transport (DeftT) July 2022 Publication #pub: parameters: trgt topic loc arg tags: /_domain/trgt/topic/loc/arg/_ts Publication #pubPrefix: parameters: tags: /_domain Publication #pubValidator: parameters: tags: /"EdDSA" Publication #cAddValidator: parameters: tags: /"EdDSA" Certificate templates: cert roleCert: /"example"/_role/_roleId/"KEY"/_/"dct"/_ cert netCert: /"example"/"KEY"/_/"dct"/_ binary schema is 301 bytes Figure 7: schemaCompile diagnostic output for example of Figure 6 This simple trust schema provides useful security, using identities both to constrain communications actions (via strict format of communications) and to convey membership. To increase security, more detail can be added to the trust schema of Figure 6. For example, different types of roles can be created, here "admin" and "sensor", and communications privacy can added by specifying AEAD Validator to encrypt cAdds. To make those roles meaningful, role-specific publications can be defined such that only admins can issue commands and only sensors can issue status. Specifying the AEAD validator means that at least one entity in the trust domain will need the key maker capability in its signing chain and here that capability is put in the signing chain of all sensors. WIth AEAD specified, a key maker is elected during instantiation of DeftT and that key maker creates, publishes, and periodically updates the shared encryption key. (Late joining entities are able to discover that a key maker has already been chosen.) These are the _only_ changes required in order to increase security and add privacy: neither application code nor binary needs to change and DeftT handles all aspects of validators. The unique approach to integrating the communication rules into the transport makes it easy to produce secure application code. adminCert: roleCert & { _role: "admin" } <= netCert sensorCert: roleCert & { _role: "sensor" } <= kmCap capCert: _network/"CAP"/_capId/_capArg/_keyinfo <= netCert kmCap: capCert & { _capId: "KM" } #reportPub: #pub & {topic:"status"} <= sensorCert #commandPub: #pub & {topic:"command"} <= adminCert #cAddValidator: "EdDSA" Nichols, et al. Expires 12 January 2023 [Page 20] Internet-Draft Defined-Trust Transport (DeftT) July 2022 Figure 8: Enhancing security in the example trust schema Converting desired behavioral structure into a trust schema is the major task of implementing Defined-trust Communications for an application domain. Once completed, all the deployment information is contained in a trust schema, which makes an application writer's job much easier. Although a particular trust schema cert defines a particular trust domain, the text version of a trust schema can be re-used for related applications. For example, a home IoT trust schema could be edited to be specific to a particular home network or a solar rooftop neighborhood and then signed with a chosen trust anchor. 3.6. DC certificates and identity bundles To participate in a trust domain, an entity needs the domain's trust anchor, signed trust schema cert and an identity signing cert (public key cert that includes private key) complete with its signing chain (public certs only) terminating at the zone's trust anchor. The public signing certs of other entities are obtained and validated (using the common trust schema and anchor) at run-time and as entities join. Well-formed certificates and identity bundle deployment are critical elements of DC. This section describes certificate requirements and the construction and installation of an identity bundle. DCT includes utilities to create certs and bundles. 3.6.1. About DC certificates As previously noted, use of third party CAs is often antithetical to OT security needs. Any use of a CA (remote or local) results in a single point of failure that greatly reduces system reliability. Employing a SDSI-like architecture with a single, local, trust root cert (trust anchor) simplifies trust management and avoids the well- known certificate authority (CA) federation and delegation issues (there are no CAs; just the local trust anchor) and other weaknesses of the X.509 architecture (summarized at [W509], original references include [RSK][NVR]). DC certs (see {#certificates)) can be generated and signed locally so there is no reason to aggregate a plethora of unrelated claims into one cert (avoiding the Aggregation problem [W509]). A cert's one and only Subject Name is the name of the Publication that contains the cert as its content and neither name nor content are allowed to contain any optional information or extensions. Signing identities are granted roles and capabilities in a trust schema by the certs that appear in their chain of trust. All certificates are created with a lifetime; local production means cert lifetimes can be just as long as necessary (as recommended in [RFC2693]) so there's no need for the code burden and increased Nichols, et al. Expires 12 January 2023 [Page 21] Internet-Draft Defined-Trust Transport (DeftT) July 2022 attack surface associated with certificate revocation lists (CRLs) or use of on-line certificate status protocol (OSCP). Key roles that require longer lifetimes, like device keys, get new certs before the current ones expire and may distribute those through DeftT. If there is a need to exclude previously authorized entities from a trust domain, there are a variety of options. The most expedient is via use of the AEAD Validator by ensuring that the group key maker(s) for a trust domain exclude that entity from subsequent symmetric key distributions. It is also possible to distribute a new trust schema and signing identities (without changing the trust anchor) using remote attestation via the TPM. 3.6.1.1. Identity bundles Identity bundles hold the certificates an entity's DeftT needs to participate in a trust domain: trust anchor, trust schema, and certs in the signing identity chain of trust. Identity bundles are intended to be installed securely when a device is first commissioned (out-of-band) for a network. The public certs can be placed in a file in a well-known location; only the private key of the bundle must be secured. The process of enrolling a device into a network by provisioning an initial secret and identity in the form of public- private key pair and using this information to securely onboard a device to a network has a long history. Current and emergent industry best practices provide a range of approaches for secure installation and update of private keys. For example, the private key of the bundle can be secured using the Trusted Platform Module, the best current practice in IoT [TATT][DMR][IAWS][TPM][OTPM][SIOT][QTPM][SKH], or secure enclave [ATZ]. Then an authorized configurer adding a new device can use TPM tools to secure the private signing key and install the rest of the bundle file in a known location before deploying the device in the network. Figure 9 shows the steps involved in configuring entities and the correspondence of the steps to the "building plans" model. The corresponding tools available in DCT are shown across the bottom and the relationship to the "building plans" model is shown across the top. (Artwork only available as svg: tools.config-rfc.svg) Figure 9: Creating and configuring identity bundles In the examples at [DCT], an identity bundle is given directly to an application directly via the command line, useful for development. For deployment, good key hygiene using best current practices must be followed e.g., [CIOT]. In deployment [maybe point to Use Case?], a small application manager is programmed for two specific purposes. First, it is registered with a supervisor [SPRV] (or similar process Nichols, et al. Expires 12 January 2023 [Page 22] Internet-Draft Defined-Trust Transport (DeftT) July 2022 control) for its own (re)start to serve as a bootstrap for the application entity. Second, it has access to the TPM functions and the ability to create "short-lived" (~hours to several days) public/ private key pair(s) that will be signed by the private key of the installed identity cert using the TPM, which will happen at (re)start and at the periodicity of the cert lifetime. Since the signing happens via requests to the TPM, the key cannot be exfiltrated. At (re)start, the signing cert is added to the stored bundle file (the entire chain should be rechecked for validity) and passed to the application entity as it is invoked. For periodic signing cert updates, only the new cert needs to be passed to the already running entity as the rest of the bundle does not change. The entity's DeftT uses its cert distributor to publish its new certs. Figure 10 outlines the procedures. (Artwork only available as svg: InstallIdbundle-rfc.svg) Figure 10: Representative commissioning and signing key maintenance All DCT certs have a validity period. Certs that sign publications are typically generated locally for the app that's going to use them thus can easily be refreshed at need. Trust anchors, trust schema, and the secured signing identity are higher value and often require gereation under hermetic conditions by some central authority. Their lifetime should be application- and deployment-specific, but the higher difficulty of cert production and distribution often requires liftetimes of weeks to years. Updating trust schemas and other certificates over the deployed network is application-domain specific and can either make use of domain best practices or develop custom DeftT-based distribution. Changing the trust anchor is considered a re-commissioning and not expected to be done over-the-air. 4. Use Cases 4.1. Secure Industrial IoT IIoT sensors offer significant advantages in industrial process control including: improved accuracy, process optimization, predictive maintenance and analysis, higher efficiency, low-cost remote accessibility and monitoring, reduced downtime, power savings, and reduced costs [IIOT]. The large physical scale of many industrial processes necessitates that expensive cabling costs be avoided through wireless transport and battery power. This is particularly an issue in nuclear power plant applications where radioactive shielding walls are very thick concrete and security regulations make any plant modifications to add cabling subject to expensive and time-consuming reviews and permitting. Wireless sensor deployments in an industrial environment can suffer from signal Nichols, et al. Expires 12 January 2023 [Page 23] Internet-Draft Defined-Trust Transport (DeftT) July 2022 outages due to shielding walls and interference caused by rotating machinery and electrical generators. Resiliency through the use of multiple gateway devices, that can receive sensor information and transmit to monitor/controllers and servers, can be used to create a robust architecture. Gateways that use DeftT can form a robust wireless mesh that is resilient against transmission outages, facilitating reliability. DeftT forms meshes with no additional configuration as Publications missing from one DeftT's set can be supplied by another within range. Several gateways are typically within a single sensor's wireless range, reducing the number of lost sensor packets. Other meshed gateways can relay the sensor's publications either wirelessly or via a wired ethernet backhaul. IIoT sensors require tight security. Critical Digital Assets (CDA) are a class of industrial assets such as power plants or chemical factories which must be carefully controlled to avoid loss-of-life accidents. Even when IIoT sensors are not used for direct control of CDA, spoofed sensor readings can lead to destructive behavior. There are real-life examples (such as uranium centrifuges) of nation-state actors changing sensor readings through cyberattacks leading to equipment damage. These risks result in a requirement for stringent security reviews and regulation of CDA sensor networks. Despite the advantages of deploying CDA sensors, adequate security is prerequisite to deploying the CDA sensors. Information conveyed via DeftT has an ensured provenance and may be encrypted in an efficient implementation making it ideal for this use. IIoT sensors may be mobile (including drone-based) and different gateways may receive the wireless broadcast of a particular sensor over time. A DeftT mesh captures Publications anywhere within its combined wireless network coverage area and ensures it efficiently reaches all other subscribing DeftTs as long as they are in range of at least one that has received the information. An out-of-service or out-of-range DeftT can receive all active subscribed publications once it is in range and/or able to communicate. This type of use of DeftT is illustrated in Figure 11 where gateway devices are deployed with DeftT relay applications that have a Bluetooth (BT) interface and a WiFi interface. A number of BT devices are deployed as sensors, switches, cameras, lock openers, etc. The WiFi network includes tablet devices and a monitor/controller computer. Gateways are placed so that there is always at least one gateway in range of a BT device and at least one gateway (or the controller) in its WiFi range. WiFi tablets can move around within range of one or more gateways. If all the DeftTs have an identical trust schema, devices on the WiFi network have access to all of the BT devices though applications on any particular device may subscribe to any subset of the information available. The WiFi DeftTs can be given a trust schema that requires encrypting its cAdds so that longer-range data Nichols, et al. Expires 12 January 2023 [Page 24] Internet-Draft Defined-Trust Transport (DeftT) July 2022 is kept private. These configuration choices are made by changes in the trust schemas alone, the application code is exactly the same. No configuration is needed to make devices recognize one another and the dynamics of syncps will keep communications efficient, ensuring that all DeftTs in the trust domain know what information is available. The Face implementation ensures that requested Publications are only sent once (within a particular range). These features mean that DeftT forms efficient broadcast meshes with no additional configuration, an important advantage. (Artwork only available as svg: relaymesh-rfc.svg) Figure 11: IIOT meshed gateways using DeftT relay applications In addition to specifying encryption and signing types, trust rules control which users can access specific sensors. For example, an outside predictive maintenance analysis vendor can be allowed access to the vibration sensor data from critical motors which is relayed through the internet, while only plant Security can see images from the site cameras due to privacy concerns. 4.2. Secure access to Distributed Energy Resources (DER) The electrical power grid is evolving to encompass many smaller generators with complex interconnections. Renewable energy systems such as smaller-scale wind and solar generator sites must be economically accessed by multiple users such as building owners, renewable asset aggregators, utilities, and maintenance personnel with varying levels of access rights. North American Electric Reliability Corporation Critical Infrastructure Protection (NERC CIP) regulations specify requirements for communications security and reliability to guard against grid outages [DER]. Legacy NERC CIP compliant utility communications approaches, using dedicated physically secured links to a few large generators, are no longer practical. DeftT offers multiple advantages over point-point TLS connections for this use case: * Security. Encryption, authentication, and authorization of all information objects. Secure broker-less pub/sub avoids single- point broker vulnerabilities. Large generation assets of hundreds of megawatts to more than 1 gigawatt, particularly nuclear power plants must be controlled securely or risk large-scale loss of life accidents. Hence, they are attractive targets for sophisticated nation-state cyber attackers seeking damage with national security implications. Even small-scale DER generators are susceptible to a coordinated attack which could still bring down the electric grid. Nichols, et al. Expires 12 January 2023 [Page 25] Internet-Draft Defined-Trust Transport (DeftT) July 2022 * Scalability. Provisioning, maintaining, and distributing multiple keys with descriptive, institutionalized, hierarchical names. DeftT allows keys to be published and securely updated on-line. Where historically a few hundred large-scale generators could supply all of the energy needs for a wide geographic area, now small-scale DER such as residential solar photovoltaic (PV) systems are located at hundreds of thousands of geographically dispersed sites. Many new systems are added daily and must be accommodated economically to spur wider adoption. * Resiliency. A mesh network of multiple client users, redundant servers, and end devices adds reliability without sacrificing security. Generation assets must be kept on-line continuously or failures risk causing a grid-wide blackout. Climate change is driving frequent natural disasters including wildfires, hurricanes, and temperature extremes which can impact the communications infrastructure. If the network is not resilient communications breakdowns can disable generators on the grid leading to blackouts. * Efficiency. Data can be published once from edge gateways over expensive cellular links and be accessed through servers by multiple authorized users, without sacrificing security. For small residential DER systems, economical but reliable connectivity is required to spur adoption of PV compared to purchasing from the grid. However, for analytics, maintenance and grid control purposes, regular updates from the site by multiple users are required. Pub/sub via DefT allows both goals to be met efficiently. * Flexible Trust rules: Varying levels of permissions are possible on a user-by-user and site-by-site basis to tightly control user security and privacy at the information object level. In an energy ecosystem with many DER, access requirements are quite complex. For example, a PV and battery storage system can be monitored on a regular basis by a homeowner. Separate equipment vendors for batteries and solar generation assets, including inverters, need to perform firmware updates or to monitor that the equipment is operating correctly for maintenance and warranty purposes. DER aggregators may contract with a utility to supply and control multiple DER systems, while the utility may want to access production data and perform some controls themselves such as during a fire event where the system must be shut down. Different permissions are required for each user. For example, hourly usage data which gives detailed insight into customer behaviors can be seen by the homeowner, but for privacy reasons might only be shared with the aggregator if permission is given. These roles and permissions can be expressed in the trust rules and then secured by DeftT's use of compiled trust schemas. Nichols, et al. Expires 12 January 2023 [Page 26] Internet-Draft Defined-Trust Transport (DeftT) July 2022 The specificity of the requirements of NERC CIP can be used to create trust schemas that contain site-specifics, allowing applications to be streamlined and generic for their functionality, rather than containing security and site-specifics. 5. Security Considerations Security of data in the application space is out-of-scope for this document. This document covers a transport protocol that secures the information it conveys (COMSEC in the language of [RFC3552]). Security of DeftT's code is out-of-scope for this document. Changes to DeftT code could bypass validation of received PDUs or modify the content of outgoing PDUs prior to signing (but valid PDUs would still have to be sent or else they will be dropped by uncompromised entities). In the event that modifications of a device's software/ firmware by unauthorized usage is of concern, a trusted execution environment such as ARM's TrustZone should be employed. As show in {#fig3}, DeftT has been designed to accomodate this: all of the DeftT code and data is on the right side of the diagram and reachable _only_ via two narrow API calls, Publish and Subscribe. The code and data could easily be put in a secure zone reachable only via callgates for each API call. Providing crypto functions is out-of-scope of this document. The reference implementation uses libsodium, an open source library maintained by experts in the field [SOD]. Crypto functions used in any alternative implementation should be high quality. Enrollment of devices is out of scope. There are a range of solutions available and selection of one can be application- dependent. Example approaches include the Open Connectivity Foundation (OCF) onboarding and BRSKI [RFC8995]. Protecting private signing keys is out-of-scope for this document. Good key hygiene should be practiced, securing private credentials using best practices for a particular application class, e.g. [COMIS][OWASP]. DeftT's unit of information transfer is a Publication. It is an atomic unit sized to fit in a lower layer transport PDU (fragmentation and reassembly are done above DeftT if necessary). All Publications MUST be signed and the signature MUST be validated. All Publications start with a 'name' (Appendix B.1). Publications are used both for ephemeral communication, like commands and status reports, and long-lived information like certs. The set reconciliation sync protocol identifies Publications using a hash of the entire Publication, including its signature. A sync collection Nichols, et al. Expires 12 January 2023 [Page 27] Internet-Draft Defined-Trust Transport (DeftT) July 2022 can contain at most one instance of any Publication so replays of Publications in the collection are discarded as duplicates on arrival. The current DeftT implementation requires weakly synchronized clocks with a known maximum skew. Ephemeral Publications have a lifetime enforced by their sync collection and their names include a timestamp used both to enforce that lifetime and prevent replay attacks by keeping a Publication in the local collection (but not advertising its existence) until its lifetime plus the skew has passed. Publications arriving a skew time before their timestamp or a skew time plus lifetime after their timestamp are discarded. An attacker can modify, drop, spoof, or replay any DeftT PDU or Publication but DeftT is designed for this to have minimal effect. 1. modification - all DeftT cAdd PDUs MUST be either signed or AEAD encrypted with a securely distributed nonce group key. This choice is specified in the trust schema and the per-app startup checks that one of these two properties holds for the trust schema and throws an error if not. * for signed PDUs each receiving DeftT MUST already have the complete, fully validated signing chain of the signer or the PDU is dropped. The signing cert MUST validate the PDUs signature or the PDU is dropped. * for encrypted PDUs the symmetric group key is automatically and securely distributed using signing identities. Each receiver uses its copy of the current symmetric key to validate the AEAD MAC and decrypt the PDU content. Invalid or malformed PDUs are dropped. cState modification to continually send an older, less complete state in order to generate the sending of cAdds could create a DoS attack but counter measures could be implemented using available DeftT information in order to isolate that entity or remove it from the trust domain. 2. dropped PDUs - DeftT's sync protocol periodically republishes cState messages which results in (re)sending cAdds. Unlike unicast transports, DeftT can and will obtain any Publications missing from its collection from any peer that has a valid copy. 3. spoofing - DeftT uses a trust management engine that validates the signing. Malformed Publications and PDUs are dropped as early as possible. Nichols, et al. Expires 12 January 2023 [Page 28] Internet-Draft Defined-Trust Transport (DeftT) July 2022 4. replay - A cAdd is sent in response to a specific cState, so a replayed cAdd that matches a current cState simply serves a retransmit of the cAdd's Publication which will be filtered for duplicates and obsolescence as described above. A cAdd that doesn't match a current cState will be dropped on arrival. Peer entity authentication in DeftT comes through the integrated trust management engine. Every DeftT instance is started with an identity bundle that includes the public root of trust, a certificate of the trust schema signed by the trust root, and its own signing identity chain with a private signing key and the chain signed at top by trust root. This is published before any Publications are sent. The trust management engine unconditionally drops any Publication or PDU that does not have a valid signer or whose signer lacks the role or capabilities required for that particular Publication or PDU. DeftT takes a modular approach to signing/validation of its PDUs and Publications, so a number of approaches to integrity, authenticity, and confidentiality are available. Certificates are distributed using integrity signing only since they are validated via chain of trust. Security features that are found to have vulnerabilities will be removed or updated and new features are easily added. A compromised member of a trust domain can only build messages that match the role and capabilities in its signing chain. Thus, a compromised lightbulb can lie about its state or refuse to turn on, but it can't tell the front door to unlock or send camera footage to a remote location. Multiple PDUs could be generated, resulting in flooding the subnet. There are possible counter-measures that could be taken if some detection code is added to the current DeftT, but this is deferred for specific applications with specific types of threats and desired responses. The reference encryption modules use encryption only on cAdd PDUs (so the specific entity that sent the cAdd cannot be determined) but the Publications it carries MUST be signed and will be validated. In DeftT, any entity can resend a Publication from any other entity (without modification) so group encryption (in effect, group signing) is no different. Some other encryption approaches are provided whose potential vulnerabilities are described in the code headers and a signed, encrypted approach is also available. 6. IANA Considerations This document has no IANA actions. 7. Normative References Nichols, et al. Expires 12 January 2023 [Page 29] Internet-Draft Defined-Trust Transport (DeftT) July 2022 [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, . [RFC8799] Carpenter, B. and B. Liu, "Limited Domains and Internet Protocols", RFC 8799, DOI 10.17487/RFC8799, July 2020, . 8. Informative References [ATZ] Ngabonziza, B., Martin, D., Bailey, A., Cho, H., and S. Martin, "TrustZone Explained: Architectural Features and Use Cases", 2016, . [CBIS] Jacobson, V., Braynard, R., Diebert, T., Mahadevan, P., Mosko, M., Briggs, N. H., Barber, S., Plass, M. F., Solis, I., Uzun, E., Lee, B., Jang, M., Byun, D., Smetters, D. K., and J. D. Thornton, "Custodian-based information sharing", 2012, . [CHPT] CheckPoint, "The Dark Side of Smart Lighting: Check Point Research Shows How Business and Home Networks Can Be Hacked from a Lightbulb", February 2020, . [CIDS] OperantNetworks, "Cybersecurity Intrusion Detection System for Large-Scale Solar Field Networks", 2021, . [CIOT] Lydersen, L., "Commissioning Methods for IoT", February 2019, . [COMIS] Lydersen, L., "Commissioning Methods for IoT", February 2019, . Nichols, et al. Expires 12 January 2023 [Page 30] Internet-Draft Defined-Trust Transport (DeftT) July 2022 [COST] Guy, W., "Wireless Industrial Networking Alliance, Wired vs. Wireless: Cost and Reliability", October 2005, . [CRTMG] Nichols, K., "Certificate-managed Secure Identity, proposal to Department of Homeland Security for topic H-SB010.2.003", June 2010, . [DCT] Pollere, "Defined-trust Communications Toolkit", 2022, . [DER] NERC, "North American Electric Reliability Corporation: Distributed Energy Resources: Connection, Modeling, and Reliability Considerations", February 2017, . [DIFF] Eppstein, D., Goodrich, M. T., Uyeda, F., and G. Varghese, "What's the difference?: efficient set reconciliation without prior context", 2011. [DIGN] Bandyk, M., "As Dominion, others target 80-year nuclear plants, cybersecurity concerns complicate digital upgrades", November 2019, . [DLOG] Li, N., Grosof, B., and J. Feigenbaum, "Delegation logic", February 2003, . [DMR] al., M. C. E., "Device Management Requirements to Secure Enterprise IoT Edge Infrastructure", April 2021, . [DNMP] Nichols, K., "Lessons Learned Building a Secure Network Measurement Framework Using Basic NDN", September 2019. [DTM] Blaze, M., Feigenbaum, J., and J. Lacy, "Decentralized Trust Management", June 1996, . Nichols, et al. Expires 12 January 2023 [Page 31] Internet-Draft Defined-Trust Transport (DeftT) July 2022 [HSE] Kapersky, "Secure Element", 2022, . [IAWS] Ganapathy, K., "Using a Trusted Platform Module for endpoint device security in AWS IoT Greengrass", November 2019, . [IBLT] Goodrich, M. T. and M. Mitzenmacher, "Invertible bloom lookup tables", 2011, . [IEC] IEC, "Power systems management and associated information exchange - Data and communications security - Part 8: Role-based access control for power system management", 2022, . [IEC61850] Wikipedia, "IEC 61850", 2021, . [IIOT] Rajiv, "Applications of Industrial Internet of Things (IIoT)", June 2018, . [IOTK] Nichols, K., "Trust schemas and {ICN:} key to secure home IoT", 2021, . [ISO9506MMS] ISO, "Industrial automation systems --- Manufacturing Message Specification --- Part 1: Service definition", 2003, . [LANG] LANGSEC, "LANGSEC: Language-theoretic Security "The View from the Tower of Babel"", 2021, . [MATR] Alliance, C. S., "Matter is the foundation for connected things", 2021, . [MHST] Wikipedia, "MQTT", 2022, . Nichols, et al. Expires 12 January 2023 [Page 32] Internet-Draft Defined-Trust Transport (DeftT) July 2022 [MODOT] Saleem, D., Granda, S., Touhiduzzaman, M., Hasandka, A., Hupp, W., Martin, M., Hossain-McKenzie, S., Cordeiro, P., Onunkwo, I., and D. Jose, "Modular Security Apparatus for Managing Distributed Cryptography for Command and Control Messages on Operational Technology Networks (Module-OT)", January 2022, . [MPSR] Mitzenmacher, M. and R. Pagh, "Simple multi-party set reconciliation", 2018. [MQTT] OASIS, "MQTT: The Standard for IoT Messaging", 2022, . [NDNS] NDN, "Named Data Networking Packet Format Specification 0.3", 2022, . [NDNW] Jacobson, V., "Watching NDN's Waist: How Simplicity Creates Innovation and Opportunity", July 2019, . [NERC] NERC, "Emerging Technology Roundtable - Substation Automation/IEC 61850", November 2016, . [NMUD] al, D. D. E., "Securing Small-Business and Home Internet of Things (IoT) Devices: Mitigating Network-Based Attacks Using Manufacturer Usage Description (MUD)", May 2021, . [NPPI] Hashemian, H. M., "Nuclear Power Plant Instrumentation and Control", 2011, . [NVR] Gutmann, P., "Everything you Never Wanted to Know about PKI but were Forced to Find Out", 2002, . [ONE] OneDM, "One Data Model", 2022, . [OPR] King, R., "Commercialization of NDN in Cybersecure Energy System Communications video", 2019, . Nichols, et al. Expires 12 January 2023 [Page 33] Internet-Draft Defined-Trust Transport (DeftT) July 2022 [OSCAL] NIST, "OSCAL: the Open Security Controls Assessment Language", 2022, . [OTPM] Hinds, L., "Keylime - An Open Source TPM Project for Remote Trust", November 2019, . [OWASP] owasp.org/www-project-sidekek/, "SideKEK README", June 2020, . [PRAG] e}bowicz, J. W., Cabaj, K., and J. Krawiec, "Messaging Protocols for IoT Systems---A Pragmatic Comparison", 2021, . [QTPM] Arthur, D. C. W., "Quick Tutorial on TPM 2.0", January 2015, . [RFC2693] Ellison, C., Frantz, B., Lampson, B., Rivest, R., Thomas, B., and T. Ylonen, "SPKI Certificate Theory", RFC 2693, DOI 10.17487/RFC2693, September 1999, . [RFC3552] Rescorla, E. and B. Korver, "Guidelines for Writing RFC Text on Security Considerations", BCP 72, RFC 3552, DOI 10.17487/RFC3552, July 2003, . [RFC4291] Hinden, R. and S. Deering, "IP Version 6 Addressing Architecture", RFC 4291, DOI 10.17487/RFC4291, February 2006, . [RFC8520] Lear, E., Droms, R., and D. Romascanu, "Manufacturer Usage Description Specification", RFC 8520, DOI 10.17487/RFC8520, March 2019, . [RFC8995] Pritikin, M., Richardson, M., Eckert, T., Behringer, M., and K. Watsen, "Bootstrapping Remote Secure Key Infrastructure (BRSKI)", RFC 8995, DOI 10.17487/RFC8995, May 2021, . [RSK] Ellison, C. and B. Schneier, "Ten Risks of PKI: What You're Not Being Told About Public Key Infrastructure", 2000. [SDSI] Rivest, R. L. and B. W. Lampson, "SDSI - A Simple Distributed Security Infrastructure", April 1996. Nichols, et al. Expires 12 January 2023 [Page 34] Internet-Draft Defined-Trust Transport (DeftT) July 2022 [SIOT] Truong, T., "How to Use the TPM to Secure Your IoT/Device Data", January 2017, . [SKH] Yates, T., "Secure key handling using the TPM", October 2018, . [SNC] Smetters, D. K. and V. Jacobson, "Securing Network Content", October 2009, . [SOD] Bernstein, D., Lange, T., and P. Schwabe, "libsodium", 2022, . [SPRV] AgendalessConsulting, "Supervisor: A Process Control System", 2022, . [ST] Samsung, "SmartThings API (v1.0-PREVIEW)", 2020, . [STNDN] Yu, Y., Afanasyev, A., Clark, D. D., claffy, K., Jacobson, V., and L. Zhang, "Schematizing Trust in Named Data Networking", 2015. [TATT] Microsoft, "TPM attestation", June 2021, . [TPM] Griffiths, P., "TPM 2.0 and Certificate-Based IoT Device Authentication", September 2020, . [W509] Wikipedia, "X.509: Security", October 2021, . [WSEN] Kintner-Meyer, M., Brambley, M., Carlon, T., and N. Bauman, "Wireless Sensors: Technology and Cost-Savings for Commercial Buildings", 2002, . [ZCL] zigbeealliance, "Zigbee Cluster Library Specification Revision 6", 2019, . Nichols, et al. Expires 12 January 2023 [Page 35] Internet-Draft Defined-Trust Transport (DeftT) July 2022 Appendix A. DeftT run-time modules DeftT's required functionality is broken into modules that have been implemented in libraries in the reference implementation [DCT]. Extensions and alternate module implementations are possible but the functionality and interfaces must be preserved. DeftT is organized in functional modules that may provide services to other modules in the course of preparing application-level information for transport and for extracting application-level information from packets. In particular, following good security practice, DeftT's Publications are constructed and signed early in their creation, then are validated (or discarded) early in the reception process. The signing and validation modules (_signature managers_) are used for both Publications and cAdds.The _schemaLib_ module provides certificate store access throughout DeftT along with access to _distributors_ of group keys, Publication-building and structural validation, and other functions of the trust management engine. This organization would not be possible in a strictly layered implementation. Figure 12 shows the DC modules which are organized in libraries in the DCT reference implementation. The component descriptions and interactions can appear complex but the internals of DeftT are completely transparent to an application and the reference implementation is efficient in both lines of code and performance. Where there are alternatives, a DeftT's trust schema completely determines which modules are used. A DeftT participates in two required Collections and MAY participate in others if required by the schema-designated signature managers. One of the required Collections handles the Publications that carry out application communications and uses "pubs" for the descriptive collection name component (see Table 2). The other required Collection manages the certificates of the trust domain and uses "cert" for the descriptive collection name component. Specific signature managers MAY require group key distribution in descriptive-named Collection "keys." (Artwork only available as svg: DeftTmodules-rfc.svg) Figure 12: Run-time modules A shim serves as the translator between application semantics and the named information objects (Publications) whose format is defined by the trust schema. Besides the shim, DeftT components are not application-specific although new signature managers, distributors, and Face modules may be added to the library to extend features. Nichols, et al. Expires 12 January 2023 [Page 36] Internet-Draft Defined-Trust Transport (DeftT) July 2022 A.1. Syncps set reconciliation Syncps has roots in the sync protocols developed for Information- Centric Networking, e.g., [CBIS], over the past decade. A DC sync protocol MUST provide mechanisms that are end-point agnostic, be broadcast-friendly, and have an efficient implementation. Syncps has been in development to meet these needs for some time, starting with the first version (covered in [DNMP]). It currently appears that syncps is the only sync protocol DC needs so discussion of the sync protocol module is explicitly syncps. Future uses and research developments may lead to new sync protocols suitable for DC but they must fulfill the same role and provide the same interfaces as syncps. The sync module performs set reconciliation over the Publications of a Collection, providing the enabling protocol for any-to-any communications. A single syncps instance manages a single collection. Each syncps announces the Publications it currently has in its Collection by sending a cState containing an IBLT [IBLT]. IBLTs solve the multi-party set-difference problem efficiently without the use of prior context and with communication proportional to the size of the difference between the sets being compared. Syncps manages both active and inactive Publications to know when and if to communicate them to peers (though Face) and subscribers (via upcalls), but it knows nothing about the format or semantics of Publications. Upcalls from syncps to other modules provide validation and expiration information for Publications as well as validation and signing of cAdds. If a cAdd fails to validate, it is silently discarded. Syncps can confirm that Publications have reached their collection if an optional callback handler is provided. This feature piggybacks on normal syncps dynamics, reporting when that Publication appears in the state summary of some other entity. As such, it should not be used as a measure of the transmission time of a Publication. Syncps keeps its DeftT instance synchronized with the sync zone at the attached Face. It adds new DeftT-local Publications to the collection and transfers validated, subscribed Publications to a shim (or distributor). Syncps creates two PDUs to manage collections: a cState, which summarizes the current state of its Collection and a cAdd, used to respond to received cStates with any applicable Publications (i.e., cAdd carry Publications). Syncps subscribes to everything in a collection. The Publications that initiate upcalls can be limited by the shim in setting up subscriptions with syncps. Nichols, et al. Expires 12 January 2023 [Page 37] Internet-Draft Defined-Trust Transport (DeftT) July 2022 A.2. SchemaLib trust management SchemaLib implements the trust management engine of DeftT. It validates certificates, uses the trust schema, and instantiates the distributors required by the trust schema. When a DeftT is instantiated, it is handed its identity bundle which contains the trust anchor for the trust domain, the particular (compiled) trust schema for the domain and the signing identity chain for the DeftT. This component performs validation of these certificates and they are stored locally. Templates for all the legal (according the the trust schema and the signing identity) Publications are created and saved to use whenever a new Publication is constructed, ensuring its structural validity. The DeftT's certificate distributor publishes all the public certs in its chain in order to connect to the collections used by this DeftT. A DeftT is not connected until a delivery indication has been received for its identity certificate chain. If information privacy is required in the trust schema, the distributors for the required keys are instantiated. Signing identities published by others are received, validated, stored and used to create templates for structural validation of Publications that originate with those signing identities. A.3. Signature managers Signature Managers (sigmgrs) implement the signing and validation of Data (which may include encryption/decryption) selected by the trust schema for Publications and their cAdd as well as by the particular signing and validation required by distributors. Use of an encryption sigmgr requires a group key distributor (see A.5). Integrity signing and null signing is not available in trust schemas (i.e., not used to specify Publications or their cAdd) and are only used in certificate and key distribution. Six sigmgrs are currently implemented in DCT, supplying the following signing and validation algorithms: EdDSA using the DCT identity cert associated with the particular DeftT RFC7693 and SHA256: integrity (not available to trust schemas) AEAD encryption/decryption for an entire sync zone where the key is created, distributed and updated by the group key distributor. The key distributor encrypts the group key individually for each valid Nichols, et al. Expires 12 January 2023 [Page 38] Internet-Draft Defined-Trust Transport (DeftT) July 2022 signing identity that has been published in the cert Collection (validated and stored locally). Members are added to the group as their validated signing identities become known; no members are added apriori. PPAEAD is a version of AEAD encryption/decryption where the encryption key is unique to a particular publisher and the group of authorized subscribers. Authorized subscribers must have the required capability in their signing chain and the subscriber group key pair is distributed by a subscriber group key distributor which creates (and updates) a key pair for the subscriber group, putting the public key in the clear and encrypting the secret key for each subscriber group member. Data can only be decrypted by authorized subscribers (subscriber group members). PPsigned adds EdDSA signing and validation to PPAEAD. Its use is indicated if there is a need to protect against authorized members of the subscriber group forging packets from Collection publishers. The encrypted packet is also signed by the publisher. Uses the same subscriber group key distributor as PPAEAD. A.4. Distributors Distributors manage certificate and key Collections transparently to applications through their own syncps. A certificate distributor MUST be provided in order to manage the signing certificate collection for any application. Its Publications are signing chain certificates and when a DeftT is first instantiated it is used to publish the certs of its own signing chain. The cert distributor must confirm their delivery to the cert Collection (i.e., shows up in an IBLT summary originated by a different DeftT) before the DeftT upcalls to the application that it can start communications. The cert distributor passes subscribed certs to schemaLib where validated certificates are stored; invalid certificates are silently discarded. The use of other distributors is dependent on the signature manager selected. AEAD, PPAEAD, and PPsigned require group key distributors to manage a key Collection. DCT contains a group key distributor for AEAD as well as a group key distributor for publisher privacy. These use the capabilities contained in signing identities to determine eligibility to be a group's key maker and eligibility to subscribe (decrypt) Publications in a publisher privacy collection. Key maker election, key creation (and re-creation), and key distribution are all handled by the distributors and transparent to the application. Nichols, et al. Expires 12 January 2023 [Page 39] Internet-Draft Defined-Trust Transport (DeftT) July 2022 A.5. Faces Faces translate between the cAdd and cStates of the sync protocol and the system packet transport used for a particular DeftT instance. Any packet transport can be used as long as it provides: * send packet and register callback for received packet * connect registration callback invoked when packets can be sent or received * information callback - MTU is returned DCT currently implements a broadcast Face that is used with UDP multicast over IPv6 and a unicast face over UDP or TCP. The DCT Face derives that of NDN, where cState are Interests and cAdds are Data, but its structure has been optimized for use on broadcast media and to interact directly with a sync module, not a forwarder node. The Face keeps: * Pending Interest Table (PIT): similar to its use in CCN and NDN, this is a table of unsatisfied Interests. Interests are removed when a corresponding Data arrives ("satisfies the Interest") or the Interest times out (when its lifetime has been exceeded). * Registered Interest Table (RIT) : this is used to hold the Interest type that this DeftT can respond to * Duplicate Interest Table (DIT): is used to keep Interests from looping (without the need for a spanning tree) and tracks the Interest plus its nonce. (A cAdd is never sent to the Interface on which it arrived.) A.6. Shims A shim is application-class-specific, converting between application- meaningful messages and DeftT's Publications. A shim is passed the salient information about a particular communication and its application level data unit and uses these to create trust schema compliant Publications, using knowledge about this application class and calls to schemaLib modules. A shim parses received Publications for call back(s) to the application. A shim can be customized to a particular application (the approach taken in the now-obsolete [DNMP]) or can provide more general communication models, such as pub/sub, streaming, request/response. This latter approach has been used to create a DCT library shim, a message-based publish/subscribe (MBPS) API whose semantics resemble MQTT but the protocol is brokerless and collection-secure, unlike MQTT. MBPS handles breaking application-level messages into trust schema specified Publications and provides an option for delivery confirmation to be passed to the application. MBPS has been used for Nichols, et al. Expires 12 January 2023 [Page 40] Internet-Draft Defined-Trust Transport (DeftT) July 2022 multiple applications: two examples are in DCT and Operant has used for other applications. MBPS provides a simple API that hides network layer and security details and offers two levels of message QoS: a default unacknowledged delivery and a confirmation that the publication has reached at least one other member of the collection. Applications can use the following MBPS methods: connect(successCB, failureCB): Performs set up (if any) necessary to allow communications to start. (e.g., signing key distribution is carried out). Invokes appropriate callback, success or failure.publish(msg, args, confCB): Publishes the given message content and returns a unique message ID. If a confirmation callback is included, mbps invokes confCB with an indicator of success or failure of the message. subscribe(handler): subscribes to all the topics in the pubs Collection. A received message's underlying publication(s) is validated before the handler is invoked. subscribe(topic, handler): distinguishes application-level subscriptions further by topic (component(s) of name that mbps will append to the pubPrefix of the trust schema) and passes a handler to use for a particular topic. run(): once application set up is finished, this turns over control to the transport. The API simplicity is shown in this application snippet: void msgPubr(mbps &cm, const auto& toSnd) { //... lines of code to prepare arguments cm.publish(toSnd, a); //load arguments in a } static void msgRecv(mbps &cm, const auto& msg, const msgArgs& a) { //... do something with msg } int main(int argc, char∗ argv[]) { mbps cm(argv[optind]); // make shim using identity bundle cm.subscribe(msgRecv); cm.connect([&cm]() { ... // prepare toSnd msgPubr(cm, toSnd); }); cm.run(); } Nichols, et al. Expires 12 January 2023 [Page 41] Internet-Draft Defined-Trust Transport (DeftT) July 2022 Appendix B. Formats Application information is packaged in Publications which are carried in cAdds that are used along with cState PDUs to communicate about and synchronize Collections. This section documents the format of Publications, cStates, and cAdds along with certificates, which are a special case of Publication (where keys are the information carried). A restricted version of the NDNv3 TLV encoding is used, with TLV types from NDN's TLV Type Registry [NDNS]. Publications and cAdds use a compatible format which allows them to use the same library signing/validation modules (_sigmgrs_). In Tables 1-3, the Type in level _i_ is contained within the TLV of the previous level _i-1_ TLV. B.1. Publications Publications are used throughout DeftT's modules. A Name TLV is used to encode the name defined in the trust schema. A Publication is valid if it starts with the correct TLV, its Name validates against the trust schema and it contains the five required Level 1 TLVs in the right order (top-down in Table 1) and nothing else. MetaInfo contains the ContentType (in DeftT either type Key or Blob). The Content carries the named information and MAY be empty. SignatureInfo indicates the SignatureType used to select the appropriate signature manager (Appendix A.3). The SignatureType for a collection's Publications is specified in the trust schema and each Publication MUST match it. (A list of current types can be found in [DCT] file include/dct/sigmgrs/sigmgr.hpp.) The KeyLocator associated with the SignatureType follows then the ValidityPeriod (if the Publication is a Certificate). Finally, SignatureValue is determined by the SignatureType and its format is verified by the signature manager. . Nichols, et al. Expires 12 January 2023 [Page 42] Internet-Draft Defined-Trust Transport (DeftT) July 2022 +=======+================+================+======================+ | Level | Level 1 | Level 2 | Comments | | 0 | | | | +=======+================+================+======================+ | Type | | | MUST be Data | +-------+----------------+----------------+----------------------+ | | Name | | | +-------+----------------+----------------+----------------------+ | | | Generic (or | trust schema sets | | | | other) | number of and | | | | | constraints on these | +-------+----------------+----------------+----------------------+ | | MetaInfo | | | +-------+----------------+----------------+----------------------+ | | | ContentType | MUST be type Key or | | | | | Blob | +-------+----------------+----------------+----------------------+ | | Content | | arbitrary sequence | | | | | of bytes including | | | | | embedded TLVs; MAY | | | | | have length 0 | +-------+----------------+----------------+----------------------+ | | SignatureInfo | | | +-------+----------------+----------------+----------------------+ | | | SignatureType | Value indicates | | | | | which signature | | | | | manager | +-------+----------------+----------------+----------------------+ | | | KeyLocator | Absent for | | | | | integrity-only | | | | | signature types | +-------+----------------+----------------+----------------------+ | | | ValidityPeriod | Only for | | | | | Certificates | +-------+----------------+----------------+----------------------+ | | SignatureValue | | Packet signature | | | | | (format determined | | | | | by SignatureType) | +-------+----------------+----------------+----------------------+ | Table: Publication format | +----------------------------------------------------------------+ Table 1 Nichols, et al. Expires 12 January 2023 [Page 43] Internet-Draft Defined-Trust Transport (DeftT) July 2022 B.2. Certificates Certificates (certs) are Publications with the ContentType set to Key and both a KeyLocator and a ValidityPeriod. DCT certs are compatible with the NDN Certificate standard V2 but adhere to a stricter set of conventions to make them resistant to substitution, work factor and DoS attacks. The only KeyLocator type allowed in a DCT cert is a KeyDigest type that MUST contain the 32 byte SHA256 digest of the _entire_ signing cert (including SignatureValue). A self-signed cert (such as a trust anchor) MUST set this digest to all zero. This digest, a cert _thumbprint_ [IOTK], is the only locator allowed in _any_ signed DC object (e.g., Publications, cAdd, schemas, certs) and MUST be present in every signed object. A signed object using any other type of locator will be considered unverifiable and silently ignored. Certificate Names use a suffix: KEY//dct/ where the cert's thumbprint is the keyID and its creation time is the version. The original publisher of any signed object MUST ensure that that _all_ certs, schemas, etc., needed to validate the object have been published _before_ the object is published. If an entity receives a signed object but is missing any of its signing dependencies, the object should be considered unverifiable and silently ignored. Such objects MUST NOT be propagated to other entities. B.3. cState cState and cAdds are are the PDUs exchanged with the system-level transport in use (e.g., UDP) but are only used by the Sync (sec A.1) and Face (sec A.5) modules. Sync creates cState and cAdd PDUs while the Face manages the protocol interaction within the trust domain. A cState PDU (see Table 2) is used to report the state of a Collection at its originator. A cState serves to inform all subscribing entities of a trust domain about Publications currently in the Collection, both so an entity can obtain Publications it is missing and so an entity can add Publications it has that are not reflected in the received cState. Nichols, et al. Expires 12 January 2023 [Page 44] Internet-Draft Defined-Trust Transport (DeftT) July 2022 +=========+==========+=========+====================================+ | Level 0 | Level 1 | Level 2 | Comments | +=========+==========+=========+====================================+ | Type | | | MUST be Interest | +---------+----------+---------+------------------------------------+ | | Name | | | +---------+----------+---------+------------------------------------+ | | | Generic | trust domain id | +---------+----------+---------+------------------------------------+ | | | Generic | descriptive collection name | +---------+----------+---------+------------------------------------+ | | | Generic | collection state (sender's view) | +---------+----------+---------+------------------------------------+ | | Nonce | | uniquely distinguishes this | | | | | cState | +---------+----------+---------+------------------------------------+ | | Lifetime | | expiry time (ms after arrival) | +---------+----------+---------+------------------------------------+ | Table: cState format | +-------------------------------------------------------------------+ Table 2 A cState is valid if it starts with the correct TLV and it contains the three required Level 1 TLVs in the right order (top-down in Table 2) and nothing else. Its Name MUST start with the trust domain id of the DeftT, then a descriptive Collection name (of at least one component) and finally a representation of the the state of the Collection at the originator. There is no signature for a cState PDU. (The cState format is a restricted subset of an NDNv3 Interest.) B.4. cAdd A cAdd PDU is used to add Publications to a Collection and carries Publications as Content. A cAdd PDU is created after a cState is received and only if the recipient has Publications that are not reflected in the recipient's local state. A cAdd is valid if it starts with the correct TLV, contains the five required Level 1 TLVs in the right order (top-down in Table 3) and nothing else. A cAdd name MUST be identical to the cState to which it responds. Nichols, et al. Expires 12 January 2023 [Page 45] Internet-Draft Defined-Trust Transport (DeftT) July 2022 +=======+================+================+========================+ | Level | Level 1 | Level 2 | Comments | | 0 | | | | +=======+================+================+========================+ | Type | | | MUST be Data | +-------+----------------+----------------+------------------------+ | | Name | | | +-------+----------------+----------------+------------------------+ | | | Generic | trust domain id | +-------+----------------+----------------+------------------------+ | | | Generic | descriptive collection | | | | | name | +-------+----------------+----------------+------------------------+ | | | Generic | collection state (from | | | | | cState) to which the | | | | | Content's Publications | | | | | are to be added | +-------+----------------+----------------+------------------------+ | | MetaInfo | | | +-------+----------------+----------------+------------------------+ | | | ContentType | MUST be type cAdd | +-------+----------------+----------------+------------------------+ | | Content | | | +-------+----------------+----------------+------------------------+ | | | Publication(s) | one or more | | | | | Publications to add to | | | | | the Collection | +-------+----------------+----------------+------------------------+ | | SignatureInfo | | | +-------+----------------+----------------+------------------------+ | | | SignatureType | Value indicates which | | | | | signature manager | +-------+----------------+----------------+------------------------+ | | | KeyLocator | Presence depends on | | | | | SignatureType | +-------+----------------+----------------+------------------------+ | | SignatureValue | | Value holds the | | | | | signature for this PDU | +-------+----------------+----------------+------------------------+ | Table: cAdd format | +------------------------------------------------------------------+ Table 3 Appendix C. Contributors Roger Jungerman Operant Networks Inc. Nichols, et al. Expires 12 January 2023 [Page 46] Internet-Draft Defined-Trust Transport (DeftT) July 2022 Lixia Zhang UCLA Email: lixia@cs.ucla.edu Roger contributed much of Section 4. Authors' Addresses Kathleen Nichols Pollere LLC Email: nichols@pollere.net Van Jacobson UCLA Email: vanj@cs.ucla.edu Randy King Operant Networks Inc. Email: randy.king@operantnetworks.com Nichols, et al. Expires 12 January 2023 [Page 47]