The ristretto255 Group
ietf@hdevalence.ca
ietf@jackgrigg.com
ietf@gtank.cc
ietf@filippo.io
ietf@en.ciph.re
Internet
Crypto Forum Research Group
This memo specifies a prime-order group, ristretto255, suitable for
safely implementing higher-level and complex cryptographic protocols.
The ristretto255 group can be implemented using Curve25519, allowing
existing Curve25519 implementations to be reused and extended to provide
a prime-order group.
Introduction
Ristretto is a technique for constructing prime-order groups with
non-malleable encodings from non-prime-order elliptic curves. It
extends the approach to cofactor elimination to support
cofactor-8 curves such as Curve25519 . In particular, this
allows an existing Curve25519 library to provide a prime-order group
with only a thin abstraction layer.
Edwards curves provide a number of implementation benefits for
cryptography, such as complete addition formulas with no exceptional
points and the fastest known formulas for curve operations. However,
every Edwards curve has a point of order 4. Thus, the group of
points on the curve is not of prime order but has a small cofactor.
This abstraction mismatch is usually handled by means of ad-hoc
protocol tweaks (such as multiplying by the cofactor in an
appropriate place), or not at all.
Even for simple protocols such as signatures, these tweaks can cause
subtle issues. For instance, Ed25519 implementations may have
different validation behaviour between batched and singleton
verification, and at least as specified in , the set of
valid signatures is not defined by the standard.
For more complex protocols, careful analysis is required as the
original security proofs may no longer apply, and the tweaks for one
protocol may have disastrous effects when applied to another (for
instance, the octuple-spend vulnerability in ).
Decaf and Ristretto fix this abstraction mismatch in one place for
all protocols, providing an abstraction to protocol implementors that
matches the abstraction commonly assumed in protocol specifications,
while still allowing the use of high-performance curve
implementations internally. The abstraction layer imposes minor
overhead, and only in the encoding and decoding phases.
While Ristretto is a general method, and can be used in conjunction
with any Edwards curve with cofactor 4 or 8, this document specifies
the ristretto255 group, which MAY be implemented using Curve25519.
There are other elliptic curves that can be used internally to
implement ristretto255, and those implementations would be
interoperable with a Curve25519-based one, but those constructions are
out-of-scope for this document.
The Ristretto construction is described and justified in detail at
https://ristretto.group.
Notation and Conventions Used In This Document
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL",
"SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED",
"NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document
are to be interpreted as described in BCP 14
when, and only when, they appear in all capitals, as shown here.
Readers are cautioned that the term "Curve25519" has varying
interpretations in the literature, and that the canonical meaning of the
term has shifted over time. Originally it referred to a specific
Diffie-Hellman key exchange mechanism. Over time, use shifted, and
"Curve25519" has been used to refer to either the abstract underlying
curve, or its concrete representation in Montgomery form, or the
specific Diffie-Hellman mechanism. This document uses the term
"Curve25519" to refer to the abstract underlying curve, as recommended
in .
Elliptic curve points in this document are represented in extended
Edwards coordinates in the `(x, y, z, t)` format . Field
elements are values modulo p, the Curve25519 prime 2^255 - 19, as
specified in Section 4.1 of . All formulas specify field
operations unless otherwise noted.
The `|` symbol represents a constant-time logical OR.
The group abstraction
Ristretto implements an abstract prime-order group interface
that exposes only the behavior that is useful to higher-level protocols,
without leaking curve-related details and pitfalls.
The only operations exposed by the abstract group are decoding,
encoding, equality, a one-way map, addition, negation, and the
derived subtraction and (multi-)scalar multiplication.
Decoding is a function from bytestrings to abstract elements with
built-in validation, so that only the canonical encodings of valid
elements are accepted. The built-in validation avoids the need for
explicit invalid curve checks.
Encoding is a function from abstract elements to bytestrings so that all
equivalent representations of the same element are encoded as identical
bytestrings. Decoding the output of the encoding function always
succeeds and returns an equivalent element to the encoding input.
The equality check reports whether two representations of an abstract
element are equivalent.
The one-way map is a function from uniformly distributed bytestrings
of a fixed length to uniformly distributed abstract elements. This map
is not invertible and is suitable for hash-to-group operations and to
select random elements.
Addition is the group operation. The group has an identity element and
prime order. Adding an element to itself as many time as the order of
the group returns the identity element. Adding the identity element to
any element returns that element unchanged. Negation returns an element
that added to the negation input returns the identity element.
Subtraction is the addition of a negated element, and scalar
multiplication is the repeated addition of an element.
ristretto255
ristretto255 is an instantiation of the abstract prime-order group
interface defined in . This documents describes how to
implement the ristretto255 prime-order group using Curve25519 points as
internal representations.
A "ristretto255 group element" is the abstract element of the prime
order group. An "element encoding" is the unique reversible encoding
of a group element. An "internal representation" is a point on the
curve used to implement ristretto255. Each group element can have
multiple equivalent internal representations.
Encoding, decoding, equality, and one-way map are defined in
. Element addition, subtraction, negation, and scalar
multiplication are implemented by applying the corresponding operations
directly to the internal representation.
The group order is the same as the order of the Curve25519 prime-order subgroup:
l = 2^252 + 27742317777372353535851937790883648493
Since ristretto255 is a prime-order group, every element except the
identity is a generator, but for interoperability a canonical generator
is selected, which can be internally represented by the Curve25519
basepoint, enabling reuse of existing precomputation for scalar
multiplication. This is its encoding:
e2f2ae0a 6abc4e71 a884a961 c500515f 58e30b6a a582dd8d b6a65945 e08d2d76
Implementations MUST NOT expose either the internal representation
or its field implementation and MUST NOT expose any operations
defined on the internal representations unless specified in this
document.
Internal utility functions and constants
The following functions are defined on field elements, and are used to
implement the other ristretto255 functions. Implementations MUST NOT
expose these to their API consumers.
This document references the following constants:
`D` = 37095705934669439343138083508754565189542113879843219016388785533085940283555
- This is the Edwards d parameter for Curve25519, as specified in Section 4.1 of .

`SQRT_M1` = 19681161376707505956807079304988542015446066515923890162744021073123829784752
`SQRT_AD_MINUS_ONE` = 25063068953384623474111414158702152701244531502492656460079210482610430750235
`INVSQRT_A_MINUS_D` = 54469307008909316920995813868745141605393597292927456921205312896311721017578
`ONE_MINUS_D_SQ` = 1159843021668779879193775521855586647937357759715417654439879720876111806838
`D_MINUS_ONE_SQ` = 40440834346308536858101042469323190826248399146238708352240133220865137265952

Negative field elements
As in , given a field element e, define `IS_NEGATIVE(e)` as
TRUE if the least non-negative integer representing e is odd, and
FALSE if it is even. This SHOULD be implemented in constant time.
Constant time operations
We assume that the field element implementation supports the following
operations, which SHOULD be implemented in constant time:
`CT_EQ(u, v)`: return TRUE if u = v, FALSE otherwise.
`CT_SELECT(v IF cond ELSE u)`: return v if cond is TRUE, else return u.
`CT_ABS(u)`: return -u if u is negative, else return u.

Note that `CT_ABS` MAY be implemented as:
CT_SELECT(-u IF IS_NEGATIVE(u) ELSE u)
Square root of a ratio of field elements
On input field elements u and v, the function `SQRT_RATIO_M1(u, v)` returns:
`(TRUE, +sqrt(u/v))` if u and v are non-zero, and u/v is square;
`(TRUE, zero)` if u is zero;
`(FALSE, zero)` if v is zero and u is non-zero;
`(FALSE, +sqrt(SQRT_M1*(u/v)))` if u and v are non-zero, and u/v is
non-square (so `SQRT_M1*(u/v)` is square),

where `+sqrt(x)` indicates the non-negative square root of x.
The computation is similar to Section 5.1.3 of , with the
difference that if the input is non-square, the function returns a
result with a defined relationship to the inputs. This result is used
for efficient implementation of the one-way map functionality. The
function can be refactored from an existing Ed25519 implementation.
`SQRT_RATIO_M1(u, v)` is defined as follows:
v3 = v^2 * v
v7 = v3^2 * v
r = (u * v3) * (u * v7)^((p-5)/8) // Note: (p - 5) / 8 is an integer.
check = v * r^2
correct_sign_sqrt = CT_EQ(check, u)
flipped_sign_sqrt = CT_EQ(check, -u)
flipped_sign_sqrt_i = CT_EQ(check, -u*SQRT_M1)
r_prime = SQRT_M1 * r
r = CT_SELECT(r_prime IF flipped_sign_sqrt | flipped_sign_sqrt_i ELSE r)
// Choose the nonnegative square root.
r = CT_ABS(r)
was_square = correct_sign_sqrt | flipped_sign_sqrt
return (was_square, r)
External ristretto255 functions
Decode
All elements are encoded as a 32-byte string. Decoding proceeds as follows:
- First, interpret the string as an integer s in little-endian
representation. If the length of the string is not 32 bytes, or if
the resulting value is >= p, decoding fails.
- Note: unlike field element decoding, the most
significant bit is not masked, and will necessarily be unset. The
test vectors in exercise these edge cases.

- If
`IS_NEGATIVE(s)` returns TRUE, decoding fails.
- Process s as follows:

ss = s^2
u1 = 1 - ss
u2 = 1 + ss
u2_sqr = u2^2
v = -(D * u1^2) - u2_sqr
(was_square, invsqrt) = SQRT_RATIO_M1(1, v * u2_sqr)
den_x = invsqrt * u2
den_y = invsqrt * den_x * v
x = CT_ABS(2 * s * den_x)
y = u1 * den_y
t = x * y
- If was_square is FALSE, or
`IS_NEGATIVE(t)` returns TRUE, or y =
0, decoding fails. Otherwise, return the group element represented
by the internal representation `(x, y, 1, t)`.

Encode
A group element with internal representation `(x0, y0, z0, t0)` is
encoded as follows:
- Process the internal representation into a field element s as follows:

u1 = (z0 + y0) * (z0 - y0)
u2 = x0 * y0
// Ignore was_square since this is always square
(_, invsqrt) = SQRT_RATIO_M1(1, u1 * u2^2)
den1 = invsqrt * u1
den2 = invsqrt * u2
z_inv = den1 * den2 * t0
ix0 = x0 * SQRT_M1
iy0 = y0 * SQRT_M1
enchanted_denominator = den1 * INVSQRT_A_MINUS_D
rotate = IS_NEGATIVE(t0 * z_inv)
x = CT_SELECT(iy0 IF rotate ELSE x0)
y = CT_SELECT(ix0 IF rotate ELSE y0)
z = z0
den_inv = CT_SELECT(enchanted_denominator IF rotate ELSE den2)
y = CT_SELECT(-y IF IS_NEGATIVE(x * z_inv) ELSE y)
s = CT_ABS(den_inv * (z - y))
- Return the 32-byte little-endian encoding of s, reduced modulo p.

Note that decoding and then re-encoding a valid group element will
yield an identical bytestring.
Equals
The equality function returns TRUE when two internal representations
correspond to the same group element. Note that internal representations
MUST NOT be compared in any other way than specified here.
For two internal representations `(x1, y1, z1, t1)` and `(x2, y2, z2, t2)`,
if
(x1 * y2 == y1 * x2) | (y1 * y2 == x1 * x2)
evaluates to TRUE, then return TRUE. Otherwise, return FALSE.
Note that the equality function always returns TRUE when applied to an
internal representation and to the internal representation obtained by
encoding and then re-decoding it. However, the internal
representations themselves might not be identical.
Unlike the equality check for an elliptic curve point in projective
coordinates, the equality check for a ristretto255 group element does
not require an inversion.
Implementations MAY also perform byte comparisons on encodings for
an equivalent, although less efficient, result.
One-way map
The one-way map operates an uniformly distributed 64-byte strings. To
obtain such an input from an arbitrary length bytestring, applications
should use a domain-separated hash construction, the choice of which
is out-of-scope for this document.
The one-way map on an input string b proceeds as follows:
- Compute P1 as
`MAP(b[ 0..32])`.
- Compute P2 as
`MAP(b[32..64])`.
- Return P1 + P2.

The MAP function is defined on a 32-bytes string as:
- Interpret the least significant 255 bits of the string as an
integer r in little-endian representation. Reduce r modulo p to
obtain a field element t.
- Note: similarly to field element decoding, the most
significant bit of the representation of r is masked.

- Process t as follows:

r = SQRT_M1 * t^2
u = (r + 1) * ONE_MINUS_D_SQ
v = (-1 - r*D) * (r + D)
(was_square, s) = SQRT_RATIO_M1(u, v)
s_prime = -CT_ABS(s*t)
s = CT_SELECT(s IF was_square ELSE s_prime)
c = CT_SELECT(-1 IF was_square ELSE r)
N = c * (r - 1) * D_MINUS_ONE_SQ - v
w0 = 2 * s * v
w1 = N * SQRT_AD_MINUS_ONE
w2 = 1 - s^2
w3 = 1 + s^2
- Return the group element represented by the internal representation
`(w0*w3, w2*w1, w1*w3, w0*w2)`.

Scalar field
The scalars for the ristretto255 group are integers modulo the order l
of the ristretto255 group.
Scalars are encoded as 32-byte strings in little-endian order.
Implementations SHOULD check that any scalar s falls in the range
0 <= s < l when parsing them and reject non-canonical scalar
encodings. Implementations SHOULD reduce scalars modulo l when
encoding them as byte strings.
Given a uniformly distributed 64-byte string b, implementations can
obtain a scalar by interpreting the 64-byte string as a 512-bit
integer in little-endian order and reducing the integer modulo l, as
in .
Note that this is the same scalar field as Curve25519, allowing
existing implementations to be reused.
API Considerations
ristretto255 is an abstraction which implements a prime-order group, and
ristretto255 elements are represented by curve points, but they are not
curve points. The API needs to reflect that: the type representing an
element of the group SHOULD be opaque and MUST NOT expose the
underlying curve point or field elements.
It is expected that a ristretto255 implementation can change its
underlying curve without causing any breaking change. The ristretto255
construction is carefully designed so that this will be the case, as
long as implementations do not expose internal representations or
operate on them except as described in this document. In particular,
implementations MUST NOT define any external ristretto255 interface as
operating on arbitrary curve points, and they MUST NOT construct
group elements except via decoding and the one-way map. They are however
allowed to apply any optimization strategy to the internal
representations as long as it doesn't change the exposed behavior of the
API.
It is RECOMMENDED that implementations do not perform a decoding and
encoding operation for each group operation, as it is inefficient and
unnecessary. Implementations SHOULD instead provide an opaque type
to hold the internal representation through multiple operations.
IANA Considerations
This document has no IANA actions.
Security Considerations
The ristretto255 group provides higher-level protocols with the
abstraction they expect: a prime-order group. Therefore, it's expected
to be safer for use in any situation where Curve25519 is used to
implement a protocol requiring a prime-order group. Note that the
safety of the abstraction can be defeated by
implementations that do not follow the guidance in .
There is no function to test whether an elliptic curve point is a
valid internal representation of a group element. The decoding
function always returns a valid internal representation, or an error, and
allowed operations on valid internal representations return valid
internal representations. In this way, an implementation can maintain
the invariant that an internal representation is always valid, so that
checking is never necessary, and invalid states are unrepresentable.
Acknowledgements
Ristretto was originally designed by Mike Hamburg as a variant of .
The authors would like to thank Daira Hopwood, Riad S. Wahby, and
Chris Wood for their comments on the draft.
Normative References
Informative References
[Cfrg] 25519 naming
Twisted Edwards Curves Revisited
Decaf: Eliminating cofactors through point
compression
Rambus Cryptography Research
Exploiting Low Order Generators in One-Time Ring Signatures
Test vectors
This section contains test vectors for ristretto255. The octets are
hex encoded, and whitespace is inserted for readability.
Multiples of the generator
The following are the encodings of the multiples 0 to 15 of the
canonical generator. That is, the first line is the encoding of the
identity point, and each successive line is obtained by adding the
generator to the previous line.
B[ 0]: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
B[ 1]: e2f2ae0a 6abc4e71 a884a961 c500515f 58e30b6a a582dd8d b6a65945 e08d2d76
B[ 2]: 6a493210 f7499cd1 7fecb510 ae0cea23 a110e8d5 b901f8ac add3095c 73a3b919
B[ 3]: 94741f5d 5d52755e ce4f23f0 44ee27d5 d1ea1e2b d196b462 166b1615 2a9d0259
B[ 4]: da808627 73358b46 6ffadfe0 b3293ab3 d9fd53c5 ea6c9553 58f56832 2daf6a57
B[ 5]: e882b131 016b52c1 d3337080 187cf768 423efccb b517bb49 5ab812c4 160ff44e
B[ 6]: f64746d3 c92b1305 0ed8d802 36a7f000 7c3b3f96 2f5ba793 d19a601e bb1df403
B[ 7]: 44f53520 926ec81f bd5a3878 45beb7df 85a96a24 ece18738 bdcfa6a7 822a176d
B[ 8]: 903293d8 f2287ebe 10e2374d c1a53e0b c887e592 699f02d0 77d5263c dd55601c
B[ 9]: 02622ace 8f7303a3 1cafc63f 8fc48fdc 16e1c8c8 d234b2f0 d6685282 a9076031
B[10]: 20706fd7 88b2720a 1ed2a5da d4952b01 f413bcf0 e7564de8 cdc81668 9e2db95f
B[11]: bce83f8b a5dd2fa5 72864c24 ba1810f9 522bc600 4afe9587 7ac73241 cafdab42
B[12]: e4549ee1 6b9aa030 99ca208c 67adafca fa4c3f3e 4e5303de 6026e3ca 8ff84460
B[13]: aa52e000 df2e16f5 5fb1032f c33bc427 42dad6bd 5a8fc0be 0167436c 5948501f
B[14]: 46376b80 f409b29d c2b5f6f0 c5259199 0896e571 6f41477c d30085ab 7f10301e
B[15]: e0c418f7 c8d9c4cd d7395b93 ea124f3a d99021bb 681dfc33 02a9d99a 2e53e64e
Note that because
B[i+1] = B[i] + B[1]
these test vectors allow testing the encoding function and
the implementation of addition simultaneously.
Invalid encodings
These are examples of encodings that MUST be rejected according to
.
# Non-canonical field encodings.
00ffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffff7f
f3ffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffff7f
edffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffff7f
# Negative field elements.
01000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
01ffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffff7f
ed57ffd8 c914fb20 1471d1c3 d245ce3c 746fcbe6 3a3679d5 1b6a516e bebe0e20
c34c4e18 26e5d403 b78e246e 88aa051c 36ccf0aa febffe13 7d148a2b f9104562
c940e5a4 404157cf b1628b10 8db051a8 d439e1a4 21394ec4 ebccb9ec 92a8ac78
47cfc549 7c53dc8e 61c91d17 fd626ffb 1c49e2bc a94eed05 2281b510 b1117a24
f1c6165d 33367351 b0da8f6e 4511010c 68174a03 b6581212 c71c0e1d 026c3c72
87260f7a 2f124951 18360f02 c26a470f 450dadf3 4a413d21 042b43b9 d93e1309
# Non-square x^2.
26948d35 ca62e643 e26a8317 7332e6b6 afeb9d08 e4268b65 0f1f5bbd 8d81d371
4eac077a 713c57b4 f4397629 a4145982 c661f480 44dd3f96 427d40b1 47d9742f
de6a7b00 deadc788 eb6b6c8d 20c0ae96 c2f20190 78fa604f ee5b87d6 e989ad7b
bcab477b e20861e0 1e4a0e29 5284146a 510150d9 817763ca f1a6f4b4 22d67042
2a292df7 e32cabab bd9de088 d1d1abec 9fc0440f 637ed2fb a145094d c14bea08
f4a9e534 fc0d216c 44b218fa 0c42d996 35a0127e e2e53c71 2f706096 49fdff22
8268436f 8c412619 6cf64b3c 7ddbda90 746a3786 25f9813d d9b84570 77256731
2810e5cb c2cc4d4e ece54f61 c6f69758 e289aa7a b440b3cb eaa21995 c2f4232b
# Negative xy value.
3eb858e7 8f5a7254 d8c97311 74a94f76 755fd394 1c0ac937 35c07ba1 4579630e
a45fdc55 c76448c0 49a1ab33 f17023ed fb2be358 1e9c7aad e8a61252 15e04220
d483fe81 3c6ba647 ebbfd3ec 41adca1c 6130c2be eee9d9bf 065c8d15 1c5f396e
8a2e1d30 050198c6 5a544831 23960ccc 38aef684 8e1ec8f5 f780e852 3769ba32
32888462 f8b486c6 8ad7dd96 10be5192 bbeaf3b4 43951ac1 a8118419 d9fa097b
22714250 1b9d4355 ccba2904 04bde415 75b03769 3cef1f43 8c47f8fb f35d1165
5c37cc49 1da847cf eb9281d4 07efc41e 15144c87 6e0170b4 99a96a22 ed31e01e
44542511 7cb8c90e dcbc7c1c c0e74f74 7f2c1efa 5630a967 c64f2877 92a48a4b
# s = -1, which causes y = 0.
ecffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffff7f
Group elements from uniform bytestrings
The following pairs are inputs to the one-way map of
, and their encoded outputs.
I: 5d1be09e3d0c82fc538112490e35701979d99e06ca3e2b5b54bffe8b4dc772c1
4d98b696a1bbfb5ca32c436cc61c16563790306c79eaca7705668b47dffe5bb6
O: 3066f82a 1a747d45 120d1740 f1435853 1a8f04bb ffe6a819 f86dfe50 f44a0a46
I: f116b34b8f17ceb56e8732a60d913dd10cce47a6d53bee9204be8b44f6678b27
0102a56902e2488c46120e9276cfe54638286b9e4b3cdb470b542d46c2068d38
O: f26e5b6f 7d362d2d 2a94c5d0 e7602cb4 773c95a2 e5c31a64 f133189f a76ed61b
I: 8422e1bbdaab52938b81fd602effb6f89110e1e57208ad12d9ad767e2e25510c
27140775f9337088b982d83d7fcf0b2fa1edffe51952cbe7365e95c86eaf325c
O: 006ccd2a 9e6867e6 a2c5cea8 3d3302cc 9de128dd 2a9a57dd 8ee7b9d7 ffe02826
I: ac22415129b61427bf464e17baee8db65940c233b98afce8d17c57beeb7876c2
150d15af1cb1fb824bbd14955f2b57d08d388aab431a391cfc33d5bafb5dbbaf
O: f8f0c87c f237953c 5890aec3 99816900 5dae3eca 1fbb0454 8c635953 c817f92a
I: 165d697a1ef3d5cf3c38565beefcf88c0f282b8e7dbd28544c483432f1cec767
5debea8ebb4e5fe7d6f6e5db15f15587ac4d4d4a1de7191e0c1ca6664abcc413
O: ae81e7de df20a497 e10c304a 765c1767 a42d6e06 029758d2 d7e8ef7c c4c41179
I: a836e6c9a9ca9f1e8d486273ad56a78c70cf18f0ce10abb1c7172ddd605d7fd2
979854f47ae1ccf204a33102095b4200e5befc0465accc263175485f0e17ea5c
O: e2705652 ff9f5e44 d3e841bf 1c251cf7 dddb77d1 40870d1a b2ed64f1 a9ce8628
I: 2cdc11eaeb95daf01189417cdddbf95952993aa9cb9c640eb5058d09702c7462
2c9965a697a3b345ec24ee56335b556e677b30e6f90ac77d781064f866a3c982
O: 80bd0726 2511cdde 4863f8a7 434cef69 6750681c b9510eea 557088f7 6d9e5065
The following one-way map inputs all produce the same encoded
output.
I: edffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
1200000000000000000000000000000000000000000000000000000000000000
I: edffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff7f
ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
I: 0000000000000000000000000000000000000000000000000000000000000080
ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff7f
I: 0000000000000000000000000000000000000000000000000000000000000000
1200000000000000000000000000000000000000000000000000000000000080
O: 30428279 1023b731 28d277bd cb5c7746 ef2eac08 dde9f298 3379cb8e 5ef0517f
Square root of a ratio of field elements
The following are inputs and outputs of `SQRT_RATIO_M1(u, v)`. The
values are little-endian encodings of field elements.
u: 0000000000000000000000000000000000000000000000000000000000000000
v: 0000000000000000000000000000000000000000000000000000000000000000
was_square: TRUE
r: 0000000000000000000000000000000000000000000000000000000000000000
u: 0000000000000000000000000000000000000000000000000000000000000000
v: 0100000000000000000000000000000000000000000000000000000000000000
was_square: TRUE
r: 0000000000000000000000000000000000000000000000000000000000000000
u: 0100000000000000000000000000000000000000000000000000000000000000
v: 0000000000000000000000000000000000000000000000000000000000000000
was_square: FALSE
r: 0000000000000000000000000000000000000000000000000000000000000000
u: 0200000000000000000000000000000000000000000000000000000000000000
v: 0100000000000000000000000000000000000000000000000000000000000000
was_square: FALSE
r: 3c5ff1b5d8e4113b871bd052f9e7bcd0582804c266ffb2d4f4203eb07fdb7c54
u: 0400000000000000000000000000000000000000000000000000000000000000
v: 0100000000000000000000000000000000000000000000000000000000000000
was_square: TRUE
r: 0200000000000000000000000000000000000000000000000000000000000000
u: 0100000000000000000000000000000000000000000000000000000000000000
v: 0400000000000000000000000000000000000000000000000000000000000000
was_square: TRUE
r: f6ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff3f