MEDIAMAN M.J. Dürst Internet-Draft Aoyama Gakuin University Updates: 6838 (if approved) 10 July 2022 Intended status: Best Current Practice Expires: 11 January 2023 Guidelines for the Definition of New Top Level Media Types draft-ietf-mediaman-toplevel-00 Abstract The goal of this document is to identify best practices for defining new top-level media types. It updates RFC 6838, when approved. Comments and discussion about this document should be directed to media-types@ietf.org, the mailing list of the Media Type Maintenance (mediaman) WG. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on 11 January 2023. Copyright Notice Copyright (c) 2022 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/ license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License. Dürst Expires 11 January 2023 [Page 1] Internet-Draft New Top Level Media Types July 2022 Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2 1.1. Requirements Language . . . . . . . . . . . . . . . . . . 2 2. Top-Level Media Type History . . . . . . . . . . . . . . . . 2 3. Potential Criteria for New Top-Level Media Types . . . . . . 5 4. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 6 5. Security Considerations . . . . . . . . . . . . . . . . . . . 6 Changelog . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Changes from draft-duerst-mediaman-toplevel-00 to draft-ietf-mediaman-toplevel-01 . . . . . . . . . . . . 6 Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . . 7 References . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Normative References . . . . . . . . . . . . . . . . . . . . . 7 Informative References . . . . . . . . . . . . . . . . . . . . 7 Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 8 1. Introduction This document defines best practices for defining new top-level media types. RFC 6838 [RFC6838] very consisely defines the conditions for defining additional top-level media types. This document expands this and therefore updates RFC 6838 [RFC6838]. This document is currently a personal draft, but is intended for adoption by the Media Type Maintenance (mediaman) IETF WG. Comments and discussion about this document should be directed to that WG's mailing list at media-types@ietf.org. Currently, this document is a collection of information, ideas, and text snippets that may be helpful in creating the actual specification. None of the current language is intended to be final. 1.1. Requirements Language The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119]. 2. Top-Level Media Type History This section shortly describes the history of top-level media types, with a particular emphasis on the (rather rare) adoption of new top- level types. RFC 1341 [RFC1341] first defined the structuring of content types into (top-level) type and subtype, and introduced the 'text', 'multipart', 'message', 'image', 'audio', 'video', and 'application' Dürst Expires 11 January 2023 [Page 2] Internet-Draft New Top Level Media Types July 2022 top-level types. That specification also allowed top-level types starting with 'X-'. With respect to new top-level types, it said the following: | An initial set of seven Content-Types is defined by this document. | This set of top-level names is intended to be substantially | complete. It is expected that additions to the larger set of | supported types can generally be accomplished by the creation of | new subtypes of these initial types. In the future, more top- | level types may be defined only by an extension to this standard. | If another primary type is to be used for any reason, it must be | given a name starting with "X-" to indicate its non-standard | status and to avoid a potential conflict with a future official | name. The first time an additional top-level type was defined was in RFC 1437 [RFC1437], but this was purely for entertainment purposes (please check date). RFC 2046 [RFC2046] discouraged the use of "X-" for (new) top-level types, with the following words: | In general, the use of "X-" top-level types is strongly | discouraged. Implementors should invent subtypes of the existing | types whenever possible. In many cases, a subtype of | "application" will be more appropriate than a new top-level type. RFC 2048 [RFC2048], published at the same time as RFC 2046 [RFC2046], defined requirements for the definition of new top-level types: | In some cases a new media type may not "fit" under any currently | defined top-level content type. Such cases are expected to be | quite rare. However, if such a case arises a new top-level type | can be defined to accommodate it. Such a definition must be done | via standards-track RFC; no other mechanism can be used to define | additional top-level content types. The 'model' top-level type was introduced by RFC 2077 [RFC2077] in 1997. RFC 4735 [RFC4735] introduced the 'example' top-level type for use in documentation examples. The 'font' top-level media type was defined in RFC 8081 [RFC8081], a work of the 'justfont' IETF WG, in 2017. There is ongoing work on defining a new 'haptics' top-level media type in draft-ietf-mediaman-haptics [HAPTICS]. Dürst Expires 11 January 2023 [Page 3] Internet-Draft New Top Level Media Types July 2022 Wikipedia (at https://en.wikipedia.org/wiki/Chemical_file_format) reports the unofficial use of a 'chemical' top-level type. The document currently defining the requirements for new top-level media types is RFC 6838 [RFC6838]. Because we are trying to update what it says, we are citing the two relevant sections, Section 4.2.5 and Section 4.2.7, here. | 4.2.5. Application Media Types | | The "application" top-level type is to be used for discrete data | that do not fit under any of the other type names, and | particularly for data to be processed by some type of application | program. This is information that must be processed by an | application before it is viewable or usable by a user. Expected | uses for the "application" type name include but are not limited | to file transfer, spreadsheets, presentations, scheduling data, | and languages for "active" (computational) material. (The last, | in particular, can pose security problems that must be understood | by implementors. The "application/postscript" media type | registration in [RFC2046] provides a good example of how to handle | these issues.) | | For example, a meeting scheduler might define a standard | representation for information about proposed meeting dates. An | intelligent user agent would use this information to conduct a | dialog with the user, and might then send additional material | based on that dialog. More generally, there have been several | "active" languages developed in which programs in a suitably | specialized language are transported to a remote location and | automatically run in the recipient's environment. Such | applications may be defined as subtypes of the "application" top- | level type. | | The subtype of "application" will often either be the name or | include part of the name of the application for which the data are | intended. This does not mean, however, that any application | program name may simply be used freely as a subtype of | "application"; the subtype needs to be registered. | 4.2.7. Additional Top-Level Types | | In some cases, a new media type may not "fit" under any currently | defined top-level type names. Such cases are expected to be quite | rare. However, if such a case does arise, a new type name can be | defined to accommodate it. Definition of a new top-level type | name MUST be done via a Standards Track RFC; no other mechanism | can be used to define additional type names. Dürst Expires 11 January 2023 [Page 4] Internet-Draft New Top Level Media Types July 2022 The two sections above are not strictly aligned, because the first says anything that doesn't go under a more specific type can go under the 'application' top-level type, while the later section allows for new top-level types. 3. Potential Criteria for New Top-Level Media Types This section describes potential criteria for new top-level media types, including criteria already defined in RFC 6838 [RFC6838]. Further work is needed to distinguish between required and optional criteria. But it is possible that we end up with just "we didn't find any objective criteria for new top-level types, and we will stop looking for such criteria". * New top level types are rare enough and different enough that each application needs to be evaluated separately. * Need to be documented in a Standards Track RFC. * This Standards Track RFC should include initial registrations of actual types. * May (or may not) need an IETF WG for definition. * Existence of a certain number of subtypes that would be grouped under the new top-level type. At a minimum, one actual subtype should exist. But the existence of a single subtype should not be enough; it should be clear that new similar types may appear in the future. * Existing wide use of an undefined top-level type may be an indication of a need, and therefore an argument for formally defining this new top-level type. * On the other hand, the use of undefined top-level types is highly discouraged. * Top-level types can help humans with understading and debugging. Therefore, evaluating how a new top-level type helps humans understand types may be crucial. But as often with humans, opinions may widely differ. * Top-level types are also used frequently in dispatching code. For example "multipart/*" is frequently handled as multipart/mixed, without understanding of a specific subtype. The top-level media types 'image', 'audio', and 'video' are also often handled generically. Documents with these top-level media types can be passed to applications handling a wide variety of image, audio, or Dürst Expires 11 January 2023 [Page 5] Internet-Draft New Top Level Media Types July 2022 video formats. HTML generating applications can select different HTML elements (e.g. or