| Internet-Draft | BGP Community Container | July 2022 |
| Raszuk, et al. | Expires 12 January 2023 | [Page] |
Route tagging plays an important role in external BGP relations, communicating various routing policies between peers. It is also a very common best practice for operators to propagate various additional route information between internal peers. The most common tool used today to attach various information about routes is through the use of BGP communities.¶
This document defines a new encoding which will enhance and simplify what can be accomplished today with the use of BGP communities. The most important addition this specification makes over currently defined BGP communities is the ability to specify and advertise an operator's parameters for execution It also provides an extensible platform for any future community encoding requirements.¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119].¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 12 January 2023.¶
Copyright (c) 2022 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
RFC 1997 [RFC1997] defines the BGP Community Attribute. This attribute is used as a tool to carry additional information in BGP routes which may help to automate peering administration. The BGP Communities Attribute consists of a set of one or more four-octet values, where each specifies a different community. Except for two reserved ranges, the encoding of community values mandates that the first two octets contain the Autonomous System number, with the next two octets containing some locally defined value.¶
Since the introduction of [RFC1997], numerous additional mechanisms have been introduced to provide BGP Community-like functionality. Each of these mechanisms introduce a new syntax, typically covered by its encoding with the BGP Path Attribute that defines it, and a semantic space.¶
The authors believe that defining a new BGP Path Attribute, with the ability to contain locally defined parameters will enhance the current level of network policies, as well as simplify BGP policy management. The proposed encoding will also facilitate the delivery of new network services without the need to define a new BGP extension for each new application.¶
When defining any new type of tool there is always a unique opportunity to specify a subset of well recognized behaviors. Lists of the current most commonly used BGP communities, as well as creation of a new registry for future definitions will be described in an extension-specific document.¶
This specification defines a new BGP Path Attribute, the BGP Community Container. It carries a series of BGP Community Container types, each prefaced with the BGP Community Container Common Header.¶
This specification also defines the BGP Wide Community Container.¶
The BGP Community Container Common Header permits Community-like attributes to be grouped under a single BGP Path Attribute. This provides hierarchy for future Community-like features. It permits implementations without knowledge of a specific Community Container's format to address that Community Container by its code point. It also permits common enforcement of the Community Container's transitivity across AS boundaries without requiring the implementation to understand a specific Container's implementation.¶
The BGP Community Container Common Header is defined in Section 3.1 and contains following encoding:¶
This document defines one Community Container with the following encoding:¶
The container type 1 "BGP Wide Community TLVs" is defined in Section 4.¶
Atoms provide data types that can be used to encode contents of BGP Community Containers. They are in the format of TLVs and are defined later in this document in Section 5.¶
This document defines a BGP Path Attribute, the BGP Community Container. The attribute type code is 34.¶
The BGP Community Container attribute is an optional, transitive BGP attribute, and may be present only once in the BGP UPDATE message.¶
The attribute contains a set of typed containers. Any given container type may appear multiple times, unless that container type's definition specifies otherwise.¶
Containers always start with the following common header:¶
0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Type | Flags |C|T| Reserved | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Length | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
This document defines container type 1. See the Section 11 for information on additional type registration policies.¶
| Bit | Value | Meaning |
|---|---|---|
| T | 0 | Not Transitive across administrative boundaries. |
| 1 | Transitive across AS/administrative boundaries. | |
| C | 0 | Not transitive across confederation boundaries. |
| 1 | Transitive across confederation boundaries. | |
| 3..7 | - | RESERVED - MUST be zero when originated and SHOULD be ignored upon receipt. |
Flags are defined globally and apply to all container types.¶
Bit 0 (T bit) Transitivity bit:¶
Bit 1 (C bit) Confederation bit:¶
The Reserved field MUST be set to zero when originated and SHOULD be ignored upon receipt.¶
The Length field represents the total length in octets of a given container's contents.¶
The Type 1 BGP Community Container, the BGP Wide Community, is of variable size (but minimum length 12). It is composed of a fixed 12-octets - containing the Community Value, the Source AS Number, and the Context AS Number - followed by optional TLVs:¶
0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |I| Community Value | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Source AS Number | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Context AS Number | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | | TLVs (optional) | | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Community Value: 4 octets¶
The Community Value indicates what set of actions a router is requested to take upon reception of a route containing this community. The semantics of this value depend on whether this is a private/local community or IANA registered.¶
When the high order bit of the Community Value field - I - is set, the value is IANA Registered and has a well defined meaning with underlying semantics. See the documentation for each Registered BGP Wide Community for its semantics and validation requirements.¶
When the high order bit of the Community Value field is clear, the value is Locally defined and has semantics solely within the control of the AS defining that community. The Context AS Number provides the namespace in which this Community Value is interpreted. It is that AS's responsibility to provide the semantics and validation requirements for the BGP Wide Community.¶
See Section 11.5 for code point space partitioning.¶
Source Autonomous System Number: 4 octets¶
The Autonomous System number indicates the AS originating this BGP Wide Community.¶
Context Autonomous System Number: 4 octets¶
This identifies the AS that provides the semantics to interpret this Community.¶
Optional type 1 container TLVs are encoded in the following format:¶
0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+ | Sub-Type | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Length | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Value (variable) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The value field of the Wide Community Target(s) TLV (Sub-Type 1) is a series of Atom TLVs. The semantics of any given Atom TLV MUST be part of the definition of a given Wide Community.¶
BGP Wide Community Targets define the matching criteria for the community. A given wide community may have a number of targets to which it applies. The semantics of these targets will vary on a per-community basis. Depending on the definition of the community, targets may be optional.¶
Wide Community Targets consist of a series of Atoms that have "match any" semantics. Thus, if any given target matches per the semantics of that Atom for the community, the community is considered to match and the action defined by the community should be executed.¶
When no Target(s) TLV is specified, it is considered "match all".¶
If the semantics of a given Atom is undefined for the community in question, this Atom MUST be ignored.¶
When no targets are required by the definition of a given Wide Community, the Wide Community Target(s) TLV SHOULD NOT be encoded in the community. Implementations MUST be prepared to accept a Wide Community Target(s) TLV with an empty value field.¶
The BGP Wide Community Exclude Target(s) TLV (Sub-Type 2) contains a list of Atoms.¶
Wide Community Exclude Targets define criteria by which the community is considered to NOT match. Depending on the semantics of the BGP Wide Community, Exclude Target(s) may be optional.¶
The semantic of the BGP Wide Community Exclude Target(s) is to match all specified Target(s) with the exception of those listed in this TLV.¶
The value field of the BGP Wide Community Exclude Target(s) TLV is a series of BGP Wide Community Atom TLVs. The semantics of any given Atom TLV MUST be part of the definition of a given Wide Community.¶
If the semantics of a given Atom is undefined for the community in question, this Atom MUST be ignored.¶
If the BGP Wide Community Target(s) TLV and the BGP Wide Community Exclude Target(s) TLV have conflicting semantics, priority MUST be given to the Wide Community Exclude Target(s) TLV.¶
When no exclude targets are required by the definition of a given BGP Wide Community, the BGP Wide Community Exclude Target(s) TLV SHOULD NOT be encoded in the community. Implementations MUST be prepared to accept a BGP Wide Community Exclude Target(s) TLV with an empty value field, which MUST be ignored, if received.¶
The BGP Wide Community Parameter(s) TLV (Sub-Type 3) contains a list of Atoms.¶
A given BGP Wide Community may have parameters that are used as inputs for executing actions defined for that community. These parameters, and any constraints implied by the parameters, MUST be defined by the wide community definition. Parameters consist of an ordered set of Atom sub-TLVs. The semantics of any specific positional instance of an Atom MUST be defined by the wide community.¶
Care must be taken when using Atoms with list semantics. If the desired behavior is a single or limited number of instances of that type, this should be documented as part of the use case of that BGP Wide Community.¶
If a parameter for a given community is of an unexpected type or length, the BGP Wide Community MUST be ignored.¶
If there are too many or too few parameters for a given community, the BGP Wide Community MUST be ignored.¶
When no parameters are required by the definition of a given Wide Community, the Wide Community Parameters TLV SHOULD NOT be encoded in the community. Implementations MUST be prepared to accept a Wide Community Parameter TLV with an empty value field, which MUST be ignored, if received.¶
The detailed interpretation of the targets or parameters SHALL be provided when describing given community type in a separate document or when locally defined by an operator.¶
Some types of BGP Community Containers, for example BGP Wide Communities, will act on and hence need to encode some distinct Atoms of data. The use of Atoms is solely subject to definition of the specific BGP Container type. Atoms are encoded as TLVs, where each TLV has the following format:¶
0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+ | Type | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Length | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Value (variable) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The Type field contains a value of 1-254. The values 0 and 255 are reserved for future use. The TLV types are to be assigned and maintained by IANA registry; see Section 11.2.¶
The Length represents the length of the "Value" field in octets.¶
The Value field contains the TLV value.¶
Supported format of the TLVs can be:¶
Type 1: Autonomous System Number List. Type 2: IPv4 Prefix (1 octet prefix length + prefix) List. Type 3: IPv6 Prefix (1 octet prefix length + prefix) List. Type 4: Unsigned Integer32 List. Type 5: IEEE Floating Point Number List. Type 6: Neighbor Class List. Type 7: User-defined Class List. Type 8: UTF-8 String.¶
The semantics of a given Atom will depend upon the context in which it is used, as defined by the containing wide community.¶
In the following sections defining the different Atoms, validation rules for the Length of the Atom will be presented. If the Length of the Atom does not match the rules for that Atom, it SHALL be considered malformed. (See Section 8.)¶
In general, Atoms of List type have the semantics of sets. Duplicate entries SHOULD NOT be present and MAY be removed by a BGP Speaker propagating the Lists. The presence of duplicate entries have no additional semantics.¶
This Atom represents a list of Autonomous System numbers, each 4 octets in size. When encoding two-octet ASes, the first two octets of this four-octet value MUST be filled with zeros. The minimum Length of this Atom is 4 octets. The Length MUST be a multiple of 4.¶
Two special values are reserved for the Autonomous System Atoms:¶
0x00000000 - to indicate "No Autonomous Systems". 0xFFFFFFFF - to indicate "All Autonomous Systems".¶
This Atom represents a list of IPv4 or IPv6 prefixes. IPv4 and IPv6 Prefix Atom values are encoded in the same format used by BGP NLRI in Section 4.3 of [RFC4271].¶
+---------------------------+ | Prefix Length (1 octet) | +---------------------------+ | Prefix (variable) | +---------------------------+
The Prefix Length for IPv4 prefixes MUST be in the range of 0..32.¶
The Prefix Length for IPv6 prefixes MUST be in the range of 0..128.¶
The Length field must be able to accommodate the list of prefixes according to the encoding rules. If the Length cannot fully accommodate the required number of octets to encode the Prefix Length and the Prefix, the Atom SHALL be considered malformed. (See section Section 8¶
This Atom represents a list of four-octet Unsigned Integers. These Unsigned Integers are stored in network byte order.¶
The minimum Length of the Unsigned Integer32 list Atom is 4 octets. The Length MUST be a multiple of 4.¶
This Atom represents a list of floating point numbers. Floating point numbers are a fixed Length of 4 octets and are stored in [IEEE.754.1985] format.¶
The minimum Length of the Floating Point Number list Atom is 4 octets. The Length MUST be a multiple of 4.¶
The Neighbor Class list Atom represents a list of Neighbor classes, each 4 octets in size. Neighbor class currently can contain three values:¶
The minimum Length of the Neighbor Class list Atom is 4 octets. The Length MUST be a multiple of 4.¶
The User-defined Class list Atom represents a list of user-defined classes, each 4 octets in size. The exact property definition is up to the semantics of the defining Autonomous System. The semantics governing a given User-defined Class list are defined by the Context AS Number and the Community Value.¶
Examples of User-defined Class properties include geography (East, West), continent (North America, Asia, Europe), etc. Similar to the [RFC1997] BGP Communities, it is necessary that the Context AS provide a registry of the value and the semantics of a given community.¶
The minimum Length of the User-defined Class list Atom is 4 octets. The Length of this Atom MUST be a multiple of 4.¶
The UTF-8 String Atom represents an arbitrary Unicode string in UTF-8 [RFC3629] format. The Length is required to be of sufficient size to carry the UTF-8 string in the Value field.¶
Implementations MUST be prepared for truncated/improperly formed UTF-8 strings. When detecting such a string, the implementation should remove trailing octets of a multi-octet sequence in order to have a well-formed string.¶
Implementations MUST be prepared to receive empty (zero-length) UTF-8 String Atoms as they may be used as Parameters.¶
According to RFC 1997, as well as IANA's Well-Known BGP Communities registry, the following BGP communities are defined to have global significance:¶
0xFFFF0000 planned-shut [draft-francois-bgp-gshut]
0xFFFFFF01 NO_EXPORT [RFC1997]
0xFFFFFF02 NO_ADVERTISE [RFC1997]
0xFFFFFF03 NO_EXPORT_SUBCONFED [RFC1997]
0xFFFFFF04 NOPEER [RFC3765]
¶
This document recommends for simplicity as well as for avoidance of backward compatibility issues that the continued use of BGP Standard Community Path Attribute, type 8, as defined in [RFC1997] and [RFC3765] to distribute non-Autonomous System specific Well-Known BGP Communities.¶
For the same reason, this document does not intend to obsolete the currently defined and deployed BGP Extended Communities.¶
Having multiple ways to propagate locally assigned BGP Communities - via the use of Standard, Extended or Large BGP Communities versus the use of BGP Wide Communities - may seem to potentially cause problems when considering propagation of conflicting actions. However, even at present, an operator may append such Communities with conflicting information.¶
Implementations SHOULD provide mechanisms to control the order of processing and manipulation of the varying types of BGP communities. With such a mechanism, operators will have the ability to control the outcome of potentially conflicting actions.¶
[RFC7606] "treat as withdraw" behavior is expected for any malformed Community Containers or malformation of their contents.¶
Each Community Container type may have additional validation rules, including permitted length of Atoms. Failure to conform to those additional rules MUST also be treated as a malformed Community Container.¶
If any Atom in a BGP Wide Community container's Exclude Targets TLV is unrecognized, that Wide Community MUST NOT be considered a match and no actions for that community should be processed. While the Targets TLV is meant to be inclusive, the Exclude Targets TLV is meant to be proscriptive of applying the action.¶
An operator of an AS 64496, wishes to locally define a Wide Community with the semantics of permitting AS_PATH prepending with targets that include AS numbers of peer ASes and peers who have been marked with a set of enumerated city locations. AS 64496 has selected Community Value 1 to represent this functionality.¶
AS 64496 has established a registered set of values to use for its User-defined Class:¶
Target semantics:¶
Parameter semantics:¶
In this example, the BGP Wide Community defined above is used by a BGP Speaker to AS_PATH prepend BGP routes containing this community AS_PATH prepend 4 TIMES when this route is to be distribute to any of AS 2424, AS 8888, to peers marked as User Class Amsterdam (100) or to peers marked User Class Moscow (104). However, such prepending would not be done to peers that have been configured in the User Class of, but not to peers of User Class New York (101), regardless of their AS number.¶
The T Flag (transitive) is unset to prevent propagation of this community outside of the provider's administrative domain.¶
0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Type (1, Wide) | Flags |0|0| Reserved(0) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Length: 53 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Community: LOCAL PREPEND ACTION CATEGORY 1 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Source AS 64496 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Context AS 64496 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Target TLV (1)| Length: 18 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | ASN List (1) | Length: 8 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Target ASN# 2424 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Target ASN# 8888 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | User List(7) | Length: 8 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Amsterdam (100) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Moscow (104) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |ExcTargetTLV(2)| Length: 5 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | User List(7) | Length: 4 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | New York (101) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Param TLV (3) | Length: 5 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Integer32 (4) | Length: 4 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Prepend # 4 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Transitive BGP Community Container communities could unintentionally spread far from their origin. If a router receives many routes from multiple sources on the Internet with different communities, it could cause significant memory usage. To prevent excessive memory usage, routers should be configured to strip unexpected communities from received routes.¶
All the security considerations for BGP Communities [RFC1997], BGP Extended Communities [RFC4360], and BGP Large Communities [RFC8092] apply to BGP Community Containers.¶
For BGP Wide Communities, the Community Value the Source AS may provide sufficient context to strip unwanted or unexpected communities.¶
Given the flexibility and power offered by BGP Wide communities, it is important to consider the additional possibilities allowed by their definition. In particular, for locally defined BGP Wide Communities, it may be wise to restrict the range of parameters. For registered BGP Wide Communities, the security considerations of the document defining them MUST address issues specific to those newly defined Communities.¶
This document defines a new BGP Path Attribute called the "BGP Community Container Attribute". IANA has assigned the value 34 from the BGP Path Attributes registry for the optional, transitive BGP Community Container Attribute.¶
This document requests IANA to define and maintain a new registry named: "BGP Community Container Atom Types". The pool of 0x00-0xFF has been defined for its allocations.¶
Registration procedures:¶
0x00: Reserved.
0x01-0x08: Defined in this document.
0x09-0xFE: IETF Review.
0xFF: Reserved.
¶
This document makes the following assignments for the BGP Community Container Atom Type values registry:¶
Name Type Value
---- ----------
Autonomous System Number List 0x01
IPv4 Prefix list 0x02
IPv6 Prefix list 0x03
Unsigned Integer32 list 0x04
IEEE Floating Point Number list 0x05
Neighbor Class list 0x06
User-defined Class list 0x07
UTF-8 string 0x08
¶
This document requests IANA to define and maintain a new registry named: "BGP Community Container Neighbor Class List Atom Types". The pool of 0x00000000-0xFFFFFFFF has been defined for its allocations.¶
Registration procedures:¶
0x00000000 : Reserved.
0x00000001-0x00000003 : Defined in this document.
0x00000004-0xFFFFFFFE : IETF Review.
0xFFFFFFFF : Reserved.
¶
This document makes the following assignments for the BGP Community Container Neighbor Class List Atom Types registry:¶
Name Type Value
---- ----------
Peer 1
Customer 2
Upstream 3
¶
This document requests IANA to define and maintain a new registry named: "BGP Community Container Types".¶
The pool of: 0x0000..0xFFFF has been defined for its allocations.¶
Registration procedures:¶
0x0000 : Reserved.
0x0001 : BGP Wide Community (defined in this
document).
0x0002-0x0004 : Reserved.
0x0005-0x00FF : IETF Review.
0x0100-0xFF00 : First Come, First Served.
0xFF01-0xFFFE : Experimental.
0xFFFF : Reserved.
¶
This document requests IANA to define and maintain a new registry named: "Registered Type 1 BGP Wide Community Community Types". The pool of 0x00000000..0xFFFFFFFF has been defined for its allocation.¶
Registration procedures:¶
0x00000000 : Reserved.
0x00000001-0x7FFFFFFF : Available for private/local use.
0x80000000 : Reserved.
0x80000001-0xFFFFFEFF : First Come, First Served for
registered use.
0xFFFFFF00-0xFFFFFFFE : Experimental.
0xFFFFFFFF : Reserved.
¶
This document requests IANA to define and maintain a new registry named: "Registered Type 1 BGP Wide Community Optional Sub-Types". The pool of 0x00..0xFF has been defined for its allocation.¶
Registration procedures:¶
0 : Reserved.
1..3 : Defined in this document.
4..254 : IETF Review.
255 : Reserved.
¶
This document makes the following assignments for the Registered Type 1 BGP Wide Community Optional Sub-Types registry:¶
Name Type Value
---- ----------
Targets 1
Exclude Targets 2
Parameters 3
¶
The following people contributed significantly to the content of the document:¶
Shintaro Kojima OTEMACHI 1st. SQUARE EAST TOWER, 3F 1-5-1, Otemachi, Chiyoda-ku, Tokyo 100-0004 Japan Email: koji@mfeed.ad.jp¶
Juan Alcaide Cisco Systems Research Triangle Park, NC United States Email: jalcaide@cisco.com¶
Burjiz Pithawala Cisco Systems 170 West Tasman Dr San Jose, CA United States Email: bpithaw@cisco.com¶
Saku Ytti TDC Oy Mechelininkatu 1a 00094 TDC Finland Email: ytti@tdc.net¶
This document owes draft-lange-flexible-bgp-communities a debt for the inspiration of many features contained herein.¶
The authors would like to thank Enke Chen, Pedro Marques, Alton Lo, Igor Gashinsky and Job Snijders for their valuable input.¶