Internet-Draft | AEAD Limits | September 2020 |

Günther, et al. | Expires 24 March 2021 | [Page] |

- Workgroup:
- Network Working Group
- Internet-Draft:
- draft-irtf-cfrg-aead-limits-01
- Published:
- Intended Status:
- Informational
- Expires:

An Authenticated Encryption with Associated Data (AEAD) algorithm provides confidentiality and integrity. Excessive use of the same key can give an attacker advantages in breaking these properties. This document provides simple guidance for users of common AEAD functions about how to limit the use of keys in order to bound the advantage given to an attacker. It considers limits in both single- and multi-user settings.¶

This note is to be removed before publishing as an RFC.¶

Source for this draft and an issue tracker can be found at https://github.com/chris-wood/draft-wood-cfrg-aead-limits.¶

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶

This Internet-Draft will expire on 24 March 2021.¶

Copyright (c) 2020 IETF Trust and the persons identified as the document authors. All rights reserved.¶

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.¶

An Authenticated Encryption with Associated Data (AEAD) algorithm provides confidentiality and integrity. [RFC5116] specifies an AEAD as a function with four inputs - secret key, nonce, plaintext, and optional associated data - that produces ciphertext output and error code indicating success or failure. The ciphertext is typically composed of the encrypted plaintext bytes and an authentication tag.¶

The generic AEAD interface does not describe usage limits. Each AEAD algorithm does describe limits on its inputs, but these are formulated as strict functional limits, such as the maximum length of inputs, which are determined by the properties of the underlying AEAD composition. Degradation of the security of the AEAD as a single key is used multiple times is not given a thorough treatment.¶

These limits might also be influenced by the number of "users" of a given key. In the traditional setting, there is one key shared between two parties. Any limits on the maximum length of inputs or encryption operations apply to that single key. The attacker's goal is to break security (confidentiality or integrity) of that specific key. However, in practice, there are often many users with independent keys. The "multi-user" security setting hence considers an attacker's advantage in breaking security of any of these many keys, further assuming the attacker may have done some offline work to help break security. As a result, AEAD algorithm limits may depend on offline work and the number of users. However, given that a multi-user attacker does not target any specific user, acceptable advantages may differ from that of the single-user setting.¶

The number of times a single pair of key and nonce can be used might also be relevant to security. For some algorithms, such as AEAD_AES_128_GCM or AEAD_AES_256_GCM, this limit is 1 and using the same pair of key and nonce has serious consequences for both confidentiality and integrity; see [NonceDisrespecting]. Nonce-reuse resistant algorithms like AEAD_AES_128_GCM_SIV can tolerate a limited amount of nonce reuse.¶

It is good practice to have limits on how many times the same key (or pair of key and nonce) are used. Setting a limit based on some measurable property of the usage, such as number of protected messages or amount of data transferred, ensures that it is easy to apply limits. This might require the application of simplifying assumptions. For example, TLS 1.3 specifies limits on the number of records that can be protected, using the simplifying assumption that records are the same size; see Section 5.5 of [TLS].¶

Currently, AEAD limits and usage requirements are scattered among peer-reviewed papers, standards documents, and other RFCs. Determining the correct limits for a given setting is challenging as papers do not use consistent labels or conventions, and rarely apply any simplifications that might aid in reaching a simple limit.¶

The intent of this document is to collate all relevant information about the proper usage and limits of AEAD algorithms in one place. This may serve as a standard reference when considering which AEAD algorithm to use, and how to use it.¶

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶

This document defines limitations in part using the quantities below.¶

Symbol | Description |
---|---|

n | AEAD block length (in bits) |

k | AEAD key length (in bits) |

r | AEAD nonce length (in bits) |

t | Size of the authentication tag (in bits) |

l | Length of each message (in blocks) |

s | Total plaintext length in all messages (in blocks) |

q | Number of protected messages (AEAD encryption invocations) |

v | Number of attacker forgery attempts (failed AEAD decryption invocations) |

p | Adversary attack probability |

o | Offline adversary work (in number of encryption and decryption queries; multi-user setting only) |

u | Number of users or keys (multi-user setting only) |

B | Maximum number of blocks encrypted by any user or key (multi-user setting only) |

For each AEAD algorithm, we define the (passive) confidentiality and (active) integrity advantage roughly as the advantage an attacker has in breaking the corresponding classical security property for the algorithm. Moreover, we define the combined authenticated encryption advantage guaranteeing both confidentiality and integrity against an active attacker. Specifically:¶

- Confidentiality advantage (CA): The probability of a passive attacker succeeding in breaking the confidentiality properties (IND-CPA) of the AEAD scheme. In this document, the definition of confidentiality advantage roughly is the probability that an attacker successfully distinguishes the ciphertext outputs of the AEAD scheme from the outputs of a random function.¶
- Integrity advantage (IA): The probability of a active attacker succeeding in breaking the integrity properties (INT-CTXT) of the AEAD scheme. In this document, the definition of integrity advantage roughly is the probability that an attacker is able to forge a ciphertext that will be accepted as valid.¶
- Authenticated Encryption advantage (AEA): The probability of a active attacker succeeding in breaking the authenticated-encryption properties of the AEAD scheme. In this document, the definition of authenticated encryption advantage roughly is the probability that an attacker successfully distinguishes the ciphertext outputs of the AEAD scheme from the outputs of a random function or is able to forge a ciphertext that will be accepted as valid.¶

See [AEComposition], [AEAD] for the formal definitions of and relations between passive confidentiality (IND-CPA), ciphertext integrity (INT-CTXT), and authenticated encryption security (AE). The authenticated encryption advantage subsumes, and can be derived as the combination of, both CA and IA:¶

CA <= AEA IA <= AEA AEA <= CA + IA¶

Each application requires an individual determination of limits in order to keep CA and IA sufficiently small. For instance, TLS aims to keep CA below 2^-60 and IA below 2^-57 (in the single-user setting). See [TLS], Section 5.5.¶

Once upper bounds on CA, IA, or AEA are determined, this document defines a process for determining three overall operational limits:¶

- Confidentiality limit (CL): The number of messages an application can encrypt before giving the adversary a confidentiality advantage higher than CA.¶
- Integrity limit (IL): The number ciphertexts an application can decrypt, either successfully or not, before giving the adversary an integrity advantage higher than IA.¶
- Authenticated encryption limit (AEL): The combined number of messages and number of ciphertexts an application can encrypt or decrypt before giving the adversary an authenticated encryption advantage higher than AEA.¶

When limits are expressed as a number of messages an application can encrypt or decrypt, this requires assumptions about the size of messages and any authenticated additional data (AAD). Limits can instead be expressed in terms of the number of bytes, or blocks, of plaintext and maybe AAD in total. To aid in translating between message-based and byte/block-based limits, a formulation of limits that includes a maximum message size (l) and the AEAD schemes' block length in bits (n) is provided.¶

All limits are based on the total number of messages, either the number of protected messages (q) or the number of forgery attempts (v); which correspond to CL and IL respectively.¶

Limits are then derived from those bounds using a target attacker probability.
For example, given an integrity advantage of `IA = v * (8l / 2^106)`

and a
targeted maximum attacker success probability of `IA = p`

, the algorithm remains
secure, i.e., the adversary's advantage does not exceed the targeted probability
of success, provided that `v <= (p * 2^106) / 8l`

. In turn, this implies that
`v <= (p * 2^103) / l`

is the corresponding limit.¶

This section summarizes the confidentiality and integrity bounds and limits for modern AEAD algorithms used in IETF protocols, including: AEAD_AES_128_GCM [RFC5116], AEAD_AES_256_GCM [RFC5116], AEAD_AES_128_CCM [RFC5116], AEAD_CHACHA20_POLY1305 [RFC8439], AEAD_AES_128_CCM_8 [RFC6655].¶

The CL and IL values bound the total number of encryption and forgery queries (q and v). Alongside each value, we also specify these bounds.¶

The CL and IL values for AES-GCM are derived in [AEBounds] and summarized below. For this AEAD, n = 128 and t = 128 [GCM]. In this example, the length s is the sum of AAD and plaintext, as described in [GCMProofs].¶

CA <= ((s + q + 1)^2) / 2^129¶

This implies the following usage limit:¶

q + s <= p^(1/2) * 2^(129/2) - 1¶

Which, for a message-based protocol with `s <= q * l`

, if we assume that every
packet is size `l`

, produces the limit:¶

q <= (p^(1/2) * 2^(129/2) - 1) / (l + 1)¶

IA <= 2 * (v * (l + 1)) / 2^128¶

This implies the following limit:¶

v <= (p * 2^127) / (l + 1)¶

The only known analysis for AEAD_CHACHA20_POLY1305 [ChaCha20Poly1305Bounds] combines the confidentiality and integrity limits into a single expression, covered below:¶

CA <= v * ((8 * l) / 2^106) IA <= v * ((8 * l) / 2^106)¶

This advantage is a tight reduction based on the underlying Poly1305 PRF [Poly1305]. It implies the following limit:¶

v <= (p * 2^103) / l¶

The CL and IL values for AEAD_AES_128_CCM are derived from [CCM-ANALYSIS] and specified in the QUIC-TLS mapping specification [I-D.ietf-quic-tls]. This analysis uses the total number of underlying block cipher operations to derive its bound. For CCM, this number is the sum of: the length of the associated data in blocks, the length of the ciphertext in blocks, the length of the plaintext in blocks, plus 1.¶

In the following limits, this is simplified to a value of twice the length of the packet in blocks, i.e., 2l represents the effective length, in number of block cipher operations, of a message with l blocks. This simplification is based on the observation that common applications of this AEAD carry only a small amount of associated data compared to ciphertext. For example, QUIC has 1 to 3 blocks of AAD.¶

For this AEAD, n = 128 and t = 128.¶

CA <= (2l * q)^2 / 2^n <= (2l * q)^2 / 2^128¶

This implies the following limit:¶

q <= sqrt((p * 2^126) / l^2)¶

IA <= v / 2^t + (2l * (v + q))^2 / 2^n <= v / 2^128 + (2l * (v + q))^2 / 2^128¶

This implies the following limit:¶

v + (2l * (v + q))^2 <= p * 2^128¶

In a setting where `v`

or `q`

is sufficiently large, `v`

is negligible compared to
`(2l * (v + q))^2`

, so this this can be simplified to:¶

v + q <= p^(1/2) * 2^63 / l¶

The analysis in [CCM-ANALYSIS] also applies to this AEAD, but the reduced tag length of 64 bits changes the integrity limit calculation considerably.¶

IA <= v / 2^t + (2l * (v + q))^2 / 2^n <= v / 2^64 + (2l * (v + q))^2 / 2^128¶

This results in reducing the limit on `v`

by a factor of 2^64.¶

v * 2^64 + (2l * (v + q))^2 <= p * 2^128¶

In the multi-user setting, each user is assumed to have an independent and identically distributed key, though nonces may be re-used across users with some very small probability. The success probability in attacking one of these many independent user keys can be generically bounded by the success probability of attacking a single user multiplied by the number of users present [MUSecurity], [GCM-MU]. Absent concrete multi-user bounds, this means the attacker advantage in the multi-user setting is the product of the single-user advantage and the number of users.¶

This section summarizes the confidentiality and integrity bounds and limits for the same algorithms as in Section 5 for the multi-user setting. The CL and IL values bound the total number of encryption and forgery queries (q and v). Alongside each value, we also specify these bounds.¶

Concrete multi-user bounds for AEAD_AES_128_GCM and AEAD_AES_256_GCM exist due to [GCM-MU2]. AES-GCM without nonce randomization is also discussed in [GCM-MU2], though this section does not include those results as they do not apply to protocols such as TLS 1.3 [RFC8446].¶

For this AEAD, n = 128, t = 128, and r = 96; the key length is k = 128 or k = 256.¶

AEA <= ((q+v)*l*B / 2^127) + (1 / 2^48)¶

This implies the following limit:¶

q + v <= (p * 2^127 - 2^79) / (l * B)¶

The confidentiality advantage is essentially dominated by the same terms as the AE advantage:¶

CA <= (q*l*B / 2^127) + (1 / 2^48)¶

This implies the following limit:¶

q <= (p * 2^127 - 2^79) / (l * B)¶

There is currently no dedicated integrity multi-user bound available for AEAD_AES_128_GCM and AEAD_AES_256_GCM. The AE limit can be used to derive an integrity limit as¶

IA <= AEA <= (q+v)*l*B / 2^127 + 1/2^48¶

This implies the following limit:¶

q + v <= (p * 2^127 - 2^79) / (l * B)¶

There are currently no concrete multi-user bounds for AEAD_CHACHA20_POLY1305,
AEAD_AES_128_CCM, or AEAD_AES_128_CCM_8. Thus, to account for the additional
factor `u`

, i.e., the number of users, each `p`

term in the confidentiality and
integrity limits is replaced with `p / u`

.¶

The combined confidentiality and integrity limit for AEAD_CHACHA20_POLY1305 is as follows.¶

v <= ((p / u) * 2^106) / 8l <= (p * 2^103) / (l * u)¶

Many of the formulae in this document depend on simplifying assumptions that are not universally applicable. When using this document to set limits, it is necessary to validate all these assumptions for the setting in which the limits might apply. In most cases, the goal is to use assumptions that result in setting a more conservative limit, but this is not always the case.¶

This document does not make any request of IANA.¶

- [AEAD]
- Rogaway, P., "Authenticated-Encryption with Associated-Data", , <https://cseweb.ucsd.edu/~mihir/papers/musu.pdf>.
- [AEBounds]
- Luykx, A. and K. Paterson, "Limits on Authenticated Encryption Use in TLS", , <http://www.isg.rhul.ac.uk/~kp/TLS-AEbounds.pdf>.
- [AEComposition]
- Bellare, M. and C. Namprempre, "Authenticated Encryption: Relations among notions and analysis of the generic composition paradigm", , <http://cseweb.ucsd.edu/~mihir/papers/oem.pdf>.
- [CCM-ANALYSIS]
- Jonsson, J., "On the Security of CTR + CBC-MAC", DOI 10.1007/3-540-36492-7_7, Selected Areas in Cryptography pp. 76-93, , <https://doi.org/10.1007/3-540-36492-7_7>.
- [ChaCha20Poly1305Bounds]
- Procter, G., "A Security Analysis of the Composition of ChaCha20 and Poly1305", , <https://eprint.iacr.org/2014/613.pdf>.
- [GCM]
- Dworkin, M., "Recommendation for Block Cipher Modes of Operation: Galois/Counter Mode (GCM) and GMAC", NIST Special Publication 800-38D, .
- [GCM-MU]
- Bellare, M. and B. Tackmann, "The Multi-User Security of Authenticated Encryption: AES-GCM in TLS 1.3", , <https://eprint.iacr.org/2016/564.pdf>.
- [GCM-MU2]
- Hoang, V.T., Tessaro, S., and A. Thiruvengadam, "The Multi-user Security of GCM, Revisited: Tight Bounds for Nonce Randomization", , <https://eprint.iacr.org/2018/993.pdf>.
- [GCMProofs]
- Iwata, T., Ohashi, K., and K. Minematsu, "Breaking and Repairing GCM Security Proofs", , <https://eprint.iacr.org/2012/438.pdf>.
- [MUSecurity]
- Bellare, M., Boldyreva, A., and S. Micali, "Public-Key Encryption in a Multi-user Setting: Security Proofs and Improvements", , <https://cseweb.ucsd.edu/~mihir/papers/musu.pdf>.
- [Poly1305]
- Bernstein, D., "The Poly1305-AES Message-Authentication Code", DOI 10.1007/11502760_3, Fast Software Encryption pp. 32-49, , <https://doi.org/10.1007/11502760_3>.
- [RFC2119]
- Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, , <https://www.rfc-editor.org/info/rfc2119>.
- [RFC5116]
- McGrew, D., "An Interface and Algorithms for Authenticated Encryption", RFC 5116, DOI 10.17487/RFC5116, , <https://www.rfc-editor.org/info/rfc5116>.
- [RFC6655]
- McGrew, D. and D. Bailey, "AES-CCM Cipher Suites for Transport Layer Security (TLS)", RFC 6655, DOI 10.17487/RFC6655, , <https://www.rfc-editor.org/info/rfc6655>.
- [RFC8174]
- Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, , <https://www.rfc-editor.org/info/rfc8174>.
- [RFC8439]
- Nir, Y. and A. Langley, "ChaCha20 and Poly1305 for IETF Protocols", RFC 8439, DOI 10.17487/RFC8439, , <https://www.rfc-editor.org/info/rfc8439>.

- [I-D.ietf-quic-tls]
- Thomson, M. and S. Turner, "Using TLS to Secure QUIC", Work in Progress, Internet-Draft, draft-ietf-quic-tls-30, , <http://www.ietf.org/internet-drafts/draft-ietf-quic-tls-30.txt>.
- [NonceDisrespecting]
- Bock, H., Zauner, A., Devlin, S., Somorovsky, J., and P. Jovanovic, "Nonce-Disrespecting Adversaries -- Practical Forgery Attacks on GCM in TLS", , <https://eprint.iacr.org/2016/475.pdf>.
- [RFC8446]
- Rescorla, E., "The Transport Layer Security (TLS) Protocol Version 1.3", RFC 8446, DOI 10.17487/RFC8446, , <https://www.rfc-editor.org/info/rfc8446>.
- [TLS]
- Rescorla, E., "The Transport Layer Security (TLS) Protocol Version 1.3", RFC 8446, DOI 10.17487/RFC8446, , <https://www.rfc-editor.org/info/rfc8446>.