lwig R. Struik
Internet-Draft Struik Security Consultancy
Intended status: Informational March 9, 2020
Expires: September 10, 2020
Alternative Elliptic Curve Representations
draft-ietf-lwig-curve-representations-09
Abstract
This document specifies how to represent Montgomery curves and
(twisted) Edwards curves as curves in short-Weierstrass form and
illustrates how this can be used to carry out elliptic curve
computations using existing implementations of, e.g., ECDSA and ECDH
using NIST prime curves. We also provide extensive background
material that may be useful for implementers of elliptic curve
cryptography.
Requirements Language
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in BCP
14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on September 10, 2020.
Struik Expires September 10, 2020 [Page 1]
Internet-Draft lwig-curve-representations March 2020
Copyright Notice
Copyright (c) 2020 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Fostering Code Reuse with New Elliptic Curves . . . . . . . . 5
2. Specification of Wei25519 . . . . . . . . . . . . . . . . . . 5
3. Use of Representation Switches . . . . . . . . . . . . . . . 5
4. Examples . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.1. Implementation of X25519 . . . . . . . . . . . . . . . . 6
4.2. Implementation of Ed25519 . . . . . . . . . . . . . . . . 7
4.3. Specification of ECDSA25519 . . . . . . . . . . . . . . . 7
4.4. Other Uses (Wei448, ECDH448, ECDSA448, and Others) . . . 8
5. Caveats . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5.1. Wire Format . . . . . . . . . . . . . . . . . . . . . . . 9
5.2. Representation Conventions . . . . . . . . . . . . . . . 9
5.3. Domain Parameters . . . . . . . . . . . . . . . . . . . . 9
6. Implementation Considerations . . . . . . . . . . . . . . . . 10
7. Implementation Status . . . . . . . . . . . . . . . . . . . . 11
8. Security Considerations . . . . . . . . . . . . . . . . . . . 12
9. Privacy Considerations . . . . . . . . . . . . . . . . . . . 13
10. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 13
10.1. IANA Considerations for Wei25519 . . . . . . . . . . . . 13
10.1.1. COSE Elliptic Curves Registration . . . . . . . . . 14
10.1.2. COSE Algorithms Registration (1/2) . . . . . . . . . 14
10.1.3. COSE Algorithms Registration (2/2) . . . . . . . . . 14
10.1.4. JOSE Elliptic Curves Registration . . . . . . . . . 15
10.1.5. JOSE Algorithms Registration (1/2) . . . . . . . . . 15
10.1.6. JOSE Algorithms Registration (2/2) . . . . . . . . . 16
10.2. IANA Considerations for Wei448 . . . . . . . . . . . . . 16
10.2.1. COSE Elliptic Curves Registration . . . . . . . . . 16
10.2.2. COSE Algorithms Registration (1/2) . . . . . . . . . 17
10.2.3. COSE Algorithms Registration (2/2) . . . . . . . . . 17
10.2.4. JOSE Elliptic Curves Registration . . . . . . . . . 17
10.2.5. JOSE Algorithms Registration (1/2) . . . . . . . . . 18
10.2.6. JOSE Algorithms Registration (2/2) . . . . . . . . . 18
Struik Expires September 10, 2020 [Page 2]
Internet-Draft lwig-curve-representations March 2020
11. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 18
12. References . . . . . . . . . . . . . . . . . . . . . . . . . 19
12.1. Normative References . . . . . . . . . . . . . . . . . . 19
12.2. Informative References . . . . . . . . . . . . . . . . . 20
Appendix A. Some (Non-Binary) Elliptic Curves . . . . . . . . . 22
A.1. Curves in Short-Weierstrass Form . . . . . . . . . . . . 22
A.2. Montgomery Curves . . . . . . . . . . . . . . . . . . . . 22
A.3. Twisted Edwards Curves . . . . . . . . . . . . . . . . . 23
Appendix B. Elliptic Curve Nomenclature and Finite Fields . . . 23
B.1. Elliptic Curve Nomenclature . . . . . . . . . . . . . . . 23
B.2. Finite Fields . . . . . . . . . . . . . . . . . . . . . . 25
Appendix C. Elliptic Curve Group Operations . . . . . . . . . . 26
C.1. Group Laws for Weierstrass Curves . . . . . . . . . . . . 26
C.2. Group Laws for Montgomery Curves . . . . . . . . . . . . 27
C.3. Group Laws for Twisted Edwards Curves . . . . . . . . . . 28
Appendix D. Relationship Between Curve Models . . . . . . . . . 29
D.1. Mapping between Twisted Edwards Curves and Montgomery
Curves . . . . . . . . . . . . . . . . . . . . . . . . . 29
D.2. Mapping between Montgomery Curves and Weierstrass Curves 30
D.3. Mapping between Twisted Edwards Curves and Weierstrass
Curves . . . . . . . . . . . . . . . . . . . . . . . . . 31
Appendix E. Curve25519 and Cousins . . . . . . . . . . . . . . . 31
E.1. Curve Definition and Alternative Representations . . . . 31
E.2. Switching between Alternative Representations . . . . . . 31
E.3. Domain Parameters . . . . . . . . . . . . . . . . . . . . 33
Appendix F. Further Mappings . . . . . . . . . . . . . . . . . . 35
F.1. Isomorphic Mapping between Twisted Edwards Curves . . . . 35
F.2. Isomorphic Mapping between Montgomery Curves . . . . . . 36
F.3. Isomorphic Mapping between Weierstrass Curves . . . . . . 36
F.4. Isogenous Mapping between Weierstrass Curves . . . . . . 37
Appendix G. Further Cousins of Curve25519 . . . . . . . . . . . 39
G.1. Further Alternative Representations . . . . . . . . . . . 39
G.2. Further Switching . . . . . . . . . . . . . . . . . . . . 39
G.3. Further Domain Parameters . . . . . . . . . . . . . . . . 40
G.4. Isogeny Details . . . . . . . . . . . . . . . . . . . . . 41
G.4.1. Isogeny Parameters . . . . . . . . . . . . . . . . . 42
G.4.2. Dual Isogeny Parameters . . . . . . . . . . . . . . . 48
Appendix H. Point Compression . . . . . . . . . . . . . . . . . 54
H.1. Point Compression for Weierstrass Curves . . . . . . . . 54
H.2. Point Compression for Montgomery Curves . . . . . . . . . 55
H.3. Point Compression for Twisted Edwards Curves . . . . . . 56
Appendix I. Data Conversions . . . . . . . . . . . . . . . . . . 57
I.1. Conversion between Bit Strings and Integers (BS2I, I2BS) 57
I.2. Conversion between Octet Strings and Integers (OS2I,
I2OS) . . . . . . . . . . . . . . . . . . . . . . . . . . 58
I.3. Conversion between Octet Strings and Bit Strings (OS2BS,
BS2OS) . . . . . . . . . . . . . . . . . . . . . . . . . 58
I.4. Conversion between Field Elements and Octet Strings
Struik Expires September 10, 2020 [Page 3]
Internet-Draft lwig-curve-representations March 2020
(FE2OS, OS2FE) . . . . . . . . . . . . . . . . . . . . . 58
I.5. Conversion between Elements of Z mod n and Octet Strings
(ZnE2OS, OS2ZnE) . . . . . . . . . . . . . . . . . . . . 59
I.6. Ordering Conventions . . . . . . . . . . . . . . . . . . 59
Appendix J. Representation Examples Curve25519 Family Members . 61
J.1. Example with Curve25519 . . . . . . . . . . . . . . . . . 61
J.2. Example with Edwards25519 . . . . . . . . . . . . . . . . 63
J.3. Example with Wei25519 . . . . . . . . . . . . . . . . . . 65
J.4. Example with Wei25519.2 . . . . . . . . . . . . . . . . . 67
J.5. Example with Wei25519.-3 . . . . . . . . . . . . . . . . 68
Appendix K. Auxiliary Functions . . . . . . . . . . . . . . . . 70
K.1. Square Roots in GF(q) . . . . . . . . . . . . . . . . . . 70
K.1.1. Square Roots in GF(q), where q = 3 (mod 4) . . . . . 70
K.1.2. Square Roots in GF(q), where q = 5 (mod 8) . . . . . 70
K.2. Inversion . . . . . . . . . . . . . . . . . . . . . . . . 71
K.3. Mappings to Curve Points . . . . . . . . . . . . . . . . 71
K.3.1. Mapping to Points of Weierstrass Curve . . . . . . . 71
K.3.2. Mapping to Points of Montgomery Curve . . . . . . . . 72
K.3.3. Mapping to Points of Twisted Edwards Curve . . . . . 74
K.4. Mappings to High-Order Curve Points . . . . . . . . . . . 74
K.4.1. Mapping to High-Order Points of Weierstrass Curve . . 74
K.4.2. Mapping to High-Order Points of Montgomery Curve . . 75
K.4.3. Mapping to High-Order Points of Twisted Edwards Curve 76
K.5. Randomized Representation of Curve Points . . . . . . . . 77
Appendix L. Curve secp256k1 and Friend . . . . . . . . . . . . . 78
L.1. Curve Definition and Alternative Representation . . . . . 78
L.2. Switching Between Representations . . . . . . . . . . . . 79
L.3. Domain Parameters . . . . . . . . . . . . . . . . . . . . 79
L.4. Isogeny Details . . . . . . . . . . . . . . . . . . . . . 81
L.4.1. Isogeny Parameters . . . . . . . . . . . . . . . . . 81
L.4.2. Dual Isogeny Parameters . . . . . . . . . . . . . . . 81
Appendix M. Curve448 and Cousins . . . . . . . . . . . . . . . . 82
M.1. Curve Definition and Alternative Representations . . . . 82
M.2. Switching between Alternative Representations . . . . . . 83
M.3. Domain Parameters . . . . . . . . . . . . . . . . . . . . 84
Appendix N. Further Cousins of Curve448 . . . . . . . . . . . . 87
N.1. Further Alternative Representations . . . . . . . . . . . 87
N.2. Further Switching . . . . . . . . . . . . . . . . . . . . 87
N.3. Further Domain Parameters . . . . . . . . . . . . . . . . 89
N.4. Isogeny Details . . . . . . . . . . . . . . . . . . . . . 91
N.4.1. Isogeny Parameters . . . . . . . . . . . . . . . . . 92
N.4.2. Dual Isogeny Parameters . . . . . . . . . . . . . . . 92
Appendix O. Representation Examples Curve448 Family Members . . 93
O.1. Example with Curve448 . . . . . . . . . . . . . . . . . . 93
O.2. Example with Ed448 . . . . . . . . . . . . . . . . . . . 96
O.3. Example with Wei448 . . . . . . . . . . . . . . . . . . . 98
O.4. Example with Wei448.-3 . . . . . . . . . . . . . . . . . 101
O.5. Example with Edwards448 . . . . . . . . . . . . . . . . . 103
Struik Expires September 10, 2020 [Page 4]
Internet-Draft lwig-curve-representations March 2020
Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 105
1. Fostering Code Reuse with New Elliptic Curves
Elliptic curves can be represented using different curve models.
Recently, IETF standardized elliptic curves that are claimed to have
better performance and improved robustness against "real world"
attacks than curves represented in the traditional "short"
Weierstrass model. This document specifies an alternative
representation of points of Curve25519, a so-called Montgomery curve,
and of points of Edwards25519, a so-called twisted Edwards curve,
which are both specified in [RFC7748], as points of a specific so-
called "short" Weierstrass curve, called Wei25519. We also define
how to efficiently switch between these different representations.
Use of Wei25519 allows easy definition of new instantiations of
signature schemes and key agreement schemes already specified for
traditional NIST prime curves, thereby allowing easy integration with
existing specifications, such as NIST SP 800-56a [SP-800-56a], FIPS
Pub 186-4 [FIPS-186-4], and ANSI X9.62-2005 [ANSI-X9.62], and
fostering code reuse on platforms that already implement some of
these schemes using elliptic curve arithmetic for curves in "short"
Weierstrass form (see Appendix C.1).
2. Specification of Wei25519
For the specification of Wei25519 and its relationship to Curve25519
and Edwards25519, see Appendix E. For further details and background
information on elliptic curves, we refer to the other appendices.
The use of Wei25519 allows reuse of existing generic code that
implements short-Weierstrass curves, such as the NIST curve P-256, to
also implement the CFRG curves Curve25519 and Edwards25519. (Here,
generic code refers to an implementation that does not depend on
hardcoded domain parameters (see also Section 6).) We also cater to
reusing of existing code where some domain parameters may have been
hardcoded, thereby widening the scope of applicability. To this end,
we specify the short-Weierstrass curves Wei25519.2 and Wei25519.-3,
with hardcoded domain parameter a=2 and a=-3 (mod p), respectively;
see Appendix G. (Here, p is the characteristic of the field over
which these curves are defined.)
3. Use of Representation Switches
The curves Curve25519, Edwards25519, and Wei25519, as specified in
Appendix E.3, are all isomorphic, with the transformations of
Appendix E.2. These transformations map the specified base point of
each of these curves to the specified base point of each of the other
Struik Expires September 10, 2020 [Page 5]
Internet-Draft lwig-curve-representations March 2020
curves. Consequently, a public-private key pair (k,R:=k*G) for any
one of these curves corresponds, via these isomorphic mappings, to
the public-private key pair (k, R':=k*G') for each of these other
curves (where G and G' are the corresponding base points of these
curves). This observation extends to the case where one also
considers curve Wei25519.2 (which has hardcoded domain parameter
a=2), as specified in Appendix G.3, since it is isomorphic to
Wei25519, with the transformation of Appendix G.2, and, thereby, also
isomorphic to Curve25519 and Edwards25519.
The curve Wei25519.-3 (which has hardcoded domain parameter a=-3 (mod
p)) is not isomorphic to the curve Wei25519, but is related in a
slightly weaker sense: the curve Wei25519 is isogenous to the curve
Wei25519.-3, where the mapping of Appendix G.2 is an isogeny of
degree l=47 that maps the specified base point G of Wei25519 to the
specified base point G' of Wei25519.-3 and where the so-called dual
isogeny (which maps Wei25519.-3 to Wei25519) has the same degree
l=47, but does not map G' to G, but to a fixed multiple hereof, where
this multiple is l=47. Consequently, a public-private key pair
(k,R:=k*G) for Wei25519 corresponds to the public-private key pair
(k, R':= k*G') for Wei25519.-3 (via the l-isogeny), whereas the
public-private key pair (k, R':=k*G') corresponds to the public-
private key pair (l*k, l*R=l*k*G) of Wei25519 (via the dual isogeny).
(Note the extra scalar l=47 here.)
Alternative curve representations can, therefore, be used in any
cryptographic scheme that involves computations on public-private key
pairs, where implementations may carry out computations on the
corresponding object for the isomorphic or isogenous curve and
convert the results back to the original curve (where, in case this
involves an l-isogeny, one has to take into account the factor l).
This includes use with elliptic-curve based signature schemes and key
agreement and key transport schemes.
For some examples of curve computations on each of the curves
specified in Appendix E.3 and Appendix G.3, see Appendix J.
4. Examples
4.1. Implementation of X25519
RFC 7748 [RFC7748] specifies the use of X25519, a co-factor Diffie-
Hellman key agreement scheme, with instantiation by the Montgomery
curve Curve25519. This key agreement scheme was already specified in
Section 6.1.2.2 of NIST SP 800-56a [SP-800-56a] for elliptic curves
in short Weierstrass form. Hence, one can implement X25519 using
existing NIST routines by (1) representing a point of the Montgomery
curve Curve25519 as a point of the Weierstrass curve Wei25519; (2)
Struik Expires September 10, 2020 [Page 6]
Internet-Draft lwig-curve-representations March 2020
instantiating the co-factor Diffie-Hellman key agreement scheme of
the NIST specification with the resulting point and Wei25519 domain
parameters; (3) representing the key resulting from this scheme
(which is a point of the curve Wei25519 in Weierstrass form) as a
point of the Montgomery curve Curve25519. The representation change
can be implemented via a simple wrapper and involves a single modular
addition (see Appendix E.2). Using this method has the additional
advantage that one can reuse the public-private key pair routines,
domain parameter validation, and other checks that are already part
of the NIST specifications. A NIST-compliant version of co-factor
Diffie-Hellman key agreement (denoted by ECDH25519) results if one
keeps inputs (key contributions) and outputs (shared key) in the
short-Weierstrass format (and, hence, does not perform Step (3)
above).
NOTE: At this point, it is unclear whether this implies that a FIPS-
accredited module implementing co-factor Diffie-Hellman for, e.g.,
P-256 would also extend this accreditation to X25519.
4.2. Implementation of Ed25519
RFC 8032 [RFC8032] specifies Ed25519, a "full" Schnorr signature
scheme, with instantiation by the twisted Edwards curve Edwards25519.
One can implement the computation of the ephemeral key pair for
Ed25519 using an existing Montgomery curve implementation by (1)
generating a public-private key pair (k, R':=k*G') for Curve25519;
(2) representing this public-private key as the pair (k, R:=k*G) for
Ed25519. As before, the representation change can be implemented via
a simple wrapper. Note that the Montgomery ladder specified in
Section 5 of RFC7748 [RFC7748] does not provide sufficient
information to reconstruct R':=(u, v) (since it does not compute the
v-coordinate of R'). However, this deficiency can be remedied by
using a slightly modified version of the Montgomery ladder that
includes reconstruction of the v-coordinate of R':=k*G' at the end of
the Montgomery ladder (which uses the v-coordinate of the base point
of Curve25519 as well). For details, see Appendix C.1.
4.3. Specification of ECDSA25519
FIPS Pub 186-4 [FIPS-186-4] specifies the signature scheme ECDSA and
can be instantiated not just with the NIST prime curves, but also
with other Weierstrass curves (that satisfy additional cryptographic
criteria). In particular, one can instantiate this scheme with the
Weierstrass curve Wei25519 and the hash function SHA-256
[FIPS-180-4], where an implementation may generate an ephemeral
public-private key pair for Wei25519 by (1) internally carrying out
these computations on the Montgomery curve Curve25519, the twisted
Edwards curve Edwards25519, or even the Weierstrass curve Wei25519.-3
Struik Expires September 10, 2020 [Page 7]
Internet-Draft lwig-curve-representations March 2020
(with hardcoded a=-3 domain parameter); (2) representing the result
as a key pair for the curve Wei25519. Note that, in either case, one
can implement these schemes with the same representation conventions
as used with existing NIST specifications, including bit/byte-
ordering, compression functions, and the-like. This allows generic
implementations of ECDSA with the hash function SHA-256 and with the
NIST curve P-256 or with the curve Wei25519 specified in this
specification to reuse the same implementation (instantiated with,
respectively, the NIST P-256 elliptic curve domain parameters or with
the domain parameters of curve Wei25519 specified in Appendix E). We
denote by ECDSA25519 the instantiation of ECDSA with SHA-256 and with
curve Wei25519, where the signature (r,s) is represented as the
right-concatenation of the integers r and s, each represented as
fixed-size strings with tight MSB/msb ordering (see Appendix I).
4.4. Other Uses (Wei448, ECDH448, ECDSA448, and Others)
Any existing specification of cryptographic schemes using elliptic
curves in Weierstrass form and that allows introduction of a new
elliptic curve (here: Wei25519) is amenable to similar constructs,
thus spawning "offspring" protocols, simply by instantiating these
using the new curve in "short" Weierstrass form, thereby allowing
code and/or specifications reuse and, for implementations that so
desire, carrying out curve computations "under the hood" on
Montgomery curve and twisted Edwards curve cousins hereof (where
these exist). This would simply require definition of a new object
identifier for any such envisioned "offspring" protocol. This could
significantly simplify standardization of schemes and help keeping
the resource and maintenance cost of implementations supporting
algorithm agility [RFC7696] at bay.
We illustrate the construction of such offspring protocols for
Curve448, another Montgomery curve recently standardized by IETF (see
[RFC7748]). Similar to the case with Curve25519, one can represent
points of this curve via different curve models, viz. as points of an
Edwards curve (Ed448) or as points of a short-Weierstrass curve
(Wei448). For the specification of Wei448 and its relationship to
Curve448 and Ed448, see Appendix M. As with ECDH25519, one can now
easily define a NIST-compliant version of co-factor Diffie-Hellman
key agreement (denoted by ECDH448), by simply reusing the example of
Section 4.1, but now using the short-Weierstrass curve Wei448, rather
than Wei25519. Similarly, one can easily specify ECDSA with Wei448
and a suitable hash function, by simply reusing the example of
Section 4.3, but now using the short-Weierstrass curve Wei448, rather
than Wei25519, and picking as hash function SHAKE256 [FIPS-202] with
output size of d=446 bits. We denote by ECDSA448 the resulting
signature scheme (with the same bit/byte-ordering conventions).
Struik Expires September 10, 2020 [Page 8]
Internet-Draft lwig-curve-representations March 2020
5. Caveats
The examples above illustrate how specifying the Weierstrass curve
Wei25519 (or any curve in short-Weierstrass format, for that matter)
may facilitate reuse of existing code and may simplify standards
development. However, the following caveats apply:
5.1. Wire Format
The transformations between alternative curve representations can be
implemented at negligible relative incremental cost if the curve
points are represented as affine points. If a point is represented
in compressed format, conversion usually requires a costly point
decompression step. This is the case in [RFC7748], where the inputs
to the co-factor Diffie-Hellman scheme X25519, as well as its output,
are represented in u-coordinate-only format. This is also the case
in [RFC8032], where the EdDSA signature includes the ephemeral
signing key represented in compressed format (see Appendix H for
details). Note that in the latter case compression is lossless,
whereas it is lossy in the former case;
5.2. Representation Conventions
While elliptic curve computations are carried-out in a field GF(q)
and, thereby, involve large integer arithmetic, these integers are
represented as bit- and byte-strings. Here, [RFC8032] uses least-
significant-byte (LSB)/least-significant-bit (lsb) conventions,
whereas [RFC7748] uses LSB/most-significant-bit (msb) conventions,
and where most other cryptographic specifications, including NIST
SP800-56a [SP-800-56a], FIPS Pub 186-4 [FIPS-186-4], and ANSI
X9.62-2005 [ANSI-X9.62] use MSB/msb conventions. Since each pair of
conventions is different (see Appendix I for details and Appendix J
for examples), this does necessitate bit/byte representation
conversions;
5.3. Domain Parameters
All traditional NIST curves are Weierstrass curves with domain
parameter a=-3, while all Brainpool curves [RFC5639] are isomorphic
to a Weierstrass curve of this form. Thus, one can expect there to
be existing Weierstrass implementations with a hardcoded a=-3 domain
parameter ("Jacobian-friendly"). For those implementations,
including the curve Wei25519 as a potential vehicle for offering
support for the CFRG curves Curve25519 and Edwards25519 is not
possible, since not of the required form. Instead, one has to
implement Wei25519.-3 and include code that implements the isogeny
and dual isogeny from and to Wei25519. The lowest odd-degree isogeny
has degree l=47 and requires roughly 9kB of storage for isogeny and
Struik Expires September 10, 2020 [Page 9]
Internet-Draft lwig-curve-representations March 2020
dual-isogeny computations (see the tables in Appendix G.4). Note
that storage would have reduced to a single 64-byte table if only the
curve would have been generated so as to be isomorphic to a
Weierstrass curve with hardcoded a=-3 parameter (this corresponds to
l=1).
NOTE 1: An example of a Montgomery curve defined over the same field
as Curve25519 that is isomorphic to a Weierstrass curve with
hardcoded a=-3 parameter is the Montgomery curve M_{A,B} with B=1 and
A=-1410290 (or, if one wants the base point to still have
u-coordinate u=9, with B=1 and A=-3960846). In either case, the
resulting curve has the same cryptographic properties as Curve25519
and the same performance (which relies on A being a 3-byte integer,
as is the case with the domain parameter A=486662 of Curve25519, and
using the same special prime p=2^255-19), while at the same time
being "Jacobian-friendly" by design.
NOTE 2: While an implementation of Curve25519 via an isogenous
Weierstrass curve with domain parameter a=-3 requires a relatively
large table (of size roughly 9kB), for the quadratic twist of
Curve25519 (i.e., the Montgomery curve M_{A,B'} with A=486662 and
B'=2) this implementation approach only requires a table of size less
than 0.5kB (over 20x smaller), solely due to the fact that it is
l-isogenous to a Weierstrass curve with a=-3 parameter with
relatively small parameter l=2 (compared to l=47, as is the case with
Curve25519 itself).
6. Implementation Considerations
The efficiency of elliptic curve arithmetic is primarily determined
by the efficiency of its group operations (see Appendix C). Numerous
optimized formulae exist, such as the use of so-called Montgomery
ladders with Montgomery curves [Mont-Ladder] or with Weierstrass
curves [Wei-Ladder], the use of hardcoded a=-3 domain parameter for
Weierstrass curves [ECC-Isogeny], and the use of hardcoded a=-1
domain parameters for twisted Edwards curves [tEd-Formulas]. These
all target reduction of the number of finite field operations
(primarily, finite field multiplications and squarings). Other
optimizations target more efficient modular reductions underlying
these finite field operations, by specifying curves defined over a
field GF(q), where the field size q has a special form or a specific
bit-size (typically, close to a multiple of a machine word).
Depending on the implementation strategy, the bit-size of q may also
facilitate reduced so-called "carry-effects" of integer arithmetic.
Most curves use a combination of these design philosophies. All NIST
curves [FIPS-186-4] and Brainpool curves [RFC5639] are Weierstrass
curves with a=-3 domain parameter, thus facilitating more efficient
Struik Expires September 10, 2020 [Page 10]
Internet-Draft lwig-curve-representations March 2020
elliptic curve group operations (via so-called Jacobian coordinates).
The NIST curves and the Montgomery curve Curve25519 are defined over
prime fields, where the prime number has a special form, whereas the
Brainpool curves - by design - use a generic prime number. None of
the NIST prime curves, nor the Brainpool curves, can be expressed as
Montgomery or twisted Edwards curves, whereas - conversely -
Montgomery curves and twisted curves can be expressed as Weierstrass
curves.
While use of Wei25519 allows reuse of existing generic code that
implements short Weierstrass curves, such as the NIST curve P-256, to
also implement the CFRG curves Curve25519 or Edwards25519, this
obviously does not result in an implementation of these CFRG curves
that exploits the specific structure of the underlying field or other
specific domain parameters (since generic). Reuse of generic code,
therefore, may result in a less computationally efficient curve
implementation than would have been possible if the implementation
had specifically targeted Curve25519 or Edwards25519 alone (with the
overall cost differential estimated to be somewhere in the interval
[1.00-1.25]). If existing generic code offers hardware support,
however, the overall speed may still be larger, since less efficient
formulae for curve arithmetic using Wei25519 curves compared to a
direct implementation of Curve25519 or Edwards25519 arithmetic may be
more than compensated for by faster implementations of the finite
field arithmetic itself.
Overall, one should consider not just code reuse and computational
efficiency, but also development and maintenance cost, and, e.g, the
cost of providing effective implementation attack countermeasures
(see also Section 8).
7. Implementation Status
[Note to the RFC Editor] Please remove this entire section before
publication, as well as the reference to [RFC7942].
This section records the status of known implementations of the
protocol defined by this specification at the time of posting of this
Internet-Draft, and is based on a proposal described in [RFC7942].
The description of implementations in this section is intended to
assist the IETF in its decision processes in progressing drafts to
RFCs. Please note that the listing of any individual implementation
here does not imply endorsement by the IETF. Furthermore, no effort
has been spent to verify the information presented here that was
supplied by IETF contributors. This is not intended as, and must not
be construed to be, a catalog of available implementations or their
features. Readers are advised to note that other implementations may
exist.
Struik Expires September 10, 2020 [Page 11]
Internet-Draft lwig-curve-representations March 2020
According to [RFC7942], "this will allow reviewers and working groups
to assign due consideration to documents that have the benefit of
running code, which may serve as evidence of valuable experimentation
and feedback that have made the implemented protocols more mature.
It is up to the individual working groups to use this information as
they see fit.
Nikolas Rosener evaluated the performance of switching between
different curve models in his Master's thesis [Rosener]. For an
implementation of Wei25519, see .
For support of this curve in tinydtls, see .
According to , an
implementation of Wei25519 on the Kinets LTC ECC HW platform improves
the performance by over a factor ten compared to a stand-alone
implementation of Curve25519 without hardware support.
The signature scheme ECDSA25519 (see Section 4.3) is supported in
.
8. Security Considerations
The different representations of elliptic curve points discussed in
this document are all obtained using a publicly known transformation,
which is either an isomorphism or a low-degree isogeny. It is well-
known that an isomorphism maps elliptic curve points to equivalent
mathematical objects and that the complexity of cryptographic
problems (such as the discrete logarithm problem) of curves related
via a low-degree isogeny are tightly related. Thus, the use of these
techniques does not negatively impact cryptographic security of
elliptic curve operations.
As to implementation security, reusing existing high-quality code or
generic implementations that have been carefully designed to
withstand implementation attacks for one curve model may allow a more
economical way of development and maintenance than providing this
same functionality for each curve model separately (if multiple curve
models need to be supported) and, otherwise, may allow a more gradual
migration path, where one may initially use existing and accredited
chipsets that cater to the pre-dominant curve model used in practice
for over 15 years.
Elliptic curves are generally used as objects in a broader
cryptographic scheme that may include processing steps that depend on
the representation conventions used (such as with, e.g., key
derivation following key establishment). These schemes should
(obviously) unambiguously specify fixed representations of each input
Struik Expires September 10, 2020 [Page 12]
Internet-Draft lwig-curve-representations March 2020
and output (e.g., representing each elliptic curve point always in
short-Weierstrass form and in uncompressed tight MSB/msb format).
To prevent cross-protocol attacks, private keys SHOULD only be used
with one cryptographic scheme. Private keys MUST NOT be reused
between Ed25519 (as specified in [RFC8032]) and ECDSA25519 (as
specified in Section 4.3).
To prevent intra-protocol cross-instantiation attacks, ephemeral
private keys MUST NOT be reused between instantiations of ECDSA25519.
9. Privacy Considerations
The transformations between different curve models described in this
document are publicly known and, therefore, do not affect privacy
provisions.
Use of a public key in any protocol for which successful execution
evidences knowledge of the corresponding private key implicitly
indicates the entity holding this private key. Reuse of this public
key with more than one protocol or more than one protocol
instantiation may, therefore, allow traceability of this entity. It
may also allow correlation of meta-data communicated with this common
data element (e.g., different addressing information), even if an
observer cannot technically verify the binding of this meta-data.
The randomized representation described in Appendix K.5 allows random
curve points to be represented as random pairs of field elements,
thereby assisting in obfuscating the presence of these curve points
in some applications.
10. IANA Considerations
Code points are requested for curve Wei25519 and Wei448 and its use
with ECDSA and co-factor ECDH, using the representation conventions
of this document.
New code points would be required in case one wishes to specify one
or more other "offspring" protocols beyond those exemplified in
Section 4.4. Specification hereof is, however, outside scope of the
current document.
10.1. IANA Considerations for Wei25519
Struik Expires September 10, 2020 [Page 13]
Internet-Draft lwig-curve-representations March 2020
10.1.1. COSE Elliptic Curves Registration
This section registers the following value in the IANA "COSE Elliptic
Curves" registry [IANA.COSE.Curves].
Name: Wei25519;
Value: TBD (Requested value: -1);
Key Type: EC2 or OKP (where OKP uses the squeezed MSB/msb
representation of this specification);
Description: short-Weierstrass curve Wei25519;
Change Controller: IESG;
Reference: Appendix E.3 of this specification;
Recommended: Yes.
(Note that The "kty" value for Wei25519 may be "OKP" or "EC2".)
10.1.2. COSE Algorithms Registration (1/2)
This section registers the following value in the IANA "COSE
Algorithms" registry [IANA.COSE.Algorithms].
Name: ECDSA25519;
Value: TBD (Requested value: -1);
Description: ECDSA with SHA-256 and curve Wei25519;
Change Controller: IESG;
Reference: Section 4.3 of this specification;
Recommended: Yes.
10.1.3. COSE Algorithms Registration (2/2)
This section registers the following value in the IANA "COSE
Algorithms" registry [IANA.COSE.Algorithms].
Name: ECDH25519;
Value: TBD (Requested value: -2);
Struik Expires September 10, 2020 [Page 14]
Internet-Draft lwig-curve-representations March 2020
Description: NIST-compliant co-factor Diffie-Hellman w/ curve
Wei25519 and key derivation function HKDF SHA256;
Change Controller: IESG;
Reference: Section 4.1 of this specification (for key derivation,
see Section 11.1 of [RFC8152]);
Recommended: Yes.
10.1.4. JOSE Elliptic Curves Registration
This section registers the following value in the IANA "JSON Web Key
Elliptic Curve" registry [IANA.JOSE.Curves].
Curve Name: Wei25519;
Curve Description: short-Weierstrass curve Wei25519;
JOSE Implementation Requirements: Optional;
Change Controller: IESG;
Reference: Appendix E.3 of this specification.
10.1.5. JOSE Algorithms Registration (1/2)
This section registers the following value in the IANA "JSON Web
Signature and Encryption Algorithms" registry [IANA.JOSE.Algorithms].
Algorithm Name: ECDSA25519;
Algorithm Description: ECDSA using SHA-256 and curve Wei25519;
Algorithm Usage Locations: alg;
JOSE Implementation Requirements: Optional;
Change Controller: IESG;
Reference: Section 4.3 of this specification;
Algorithm Analysis Document(s): Section 4.3 of this specification.
Struik Expires September 10, 2020 [Page 15]
Internet-Draft lwig-curve-representations March 2020
10.1.6. JOSE Algorithms Registration (2/2)
This section registers the following value in the IANA "JSON Web
Signature and Encryption Algorithms" registry [IANA.JOSE.Algorithms].
Algorithm Name: ECDH25519;
Algorithm Description: NIST-compliant co-factor Diffie-Hellman w/
curve Wei25519 and key derivation function HKDF SHA256;
Algorithm Usage Locations: alg;
JOSE Implementation Requirements: Optional;
Change Controller: IESG;
Reference: Section 4.1 of this specification (for key derivation,
see Section 5 of [SP-800-56c]);
Algorithm Analysis Document(s): Section 4.1 of this specification
(for key derivation, see Section 5 of [SP-800-56c]).
10.2. IANA Considerations for Wei448
10.2.1. COSE Elliptic Curves Registration
This section registers the following value in the IANA "COSE Elliptic
Curves" registry [IANA.COSE.Curves].
Name: Wei448;
Value: TBD (Requested value: -2);
Key Type: EC2 or OKP (where OKP uses the squeezed MSB/msb
representation of this specification);
Description: short-Weierstrass curve Wei448;
Change Controller: IESG;
Reference: Appendix M.3 of this specification;
Recommended: Yes.
(Note that The "kty" value for Wei448 may be "OKP" or "EC2".)
Struik Expires September 10, 2020 [Page 16]
Internet-Draft lwig-curve-representations March 2020
10.2.2. COSE Algorithms Registration (1/2)
This section registers the following value in the IANA "COSE
Algorithms" registry [IANA.COSE.Algorithms].
Name: ECDSA448;
Value: TBD (Requested value: -21);
Description: ECDSA with SHAKE256 and curve Wei448;
Change Controller: IESG;
Reference: Section 4.4 of this specification;
Recommended: Yes.
10.2.3. COSE Algorithms Registration (2/2)
This section registers the following value in the IANA "COSE
Algorithms" registry [IANA.COSE.Algorithms].
Name: ECDH448;
Value: TBD (Requested value: -22);
Description: NIST-compliant co-factor Diffie-Hellman w/ curve
Wei25519 and key derivation function HKDF SHA512;
Change Controller: IESG;
Reference: Section 4.4 of this specification (for key derivation,
see Section 11.1 of [RFC8152]);
Recommended: Yes.
10.2.4. JOSE Elliptic Curves Registration
This section registers the following value in the IANA "JSON Web Key
Elliptic Curve" registry [IANA.JOSE.Curves].
Curve Name: Wei448;
Curve Description: short-Weierstrass curve Wei448;
JOSE Implementation Requirements: Optional;
Change Controller: IESG;
Struik Expires September 10, 2020 [Page 17]
Internet-Draft lwig-curve-representations March 2020
Reference: Appendix M.3 of this specification.
10.2.5. JOSE Algorithms Registration (1/2)
This section registers the following value in the IANA "JSON Web
Signature and Encryption Algorithms" registry [IANA.JOSE.Algorithms].
Algorithm Name: ECDSA448;
Algorithm Description: ECDSA using SHAKE256 and curve Wei448;
Algorithm Usage Locations: alg;
JOSE Implementation Requirements: Optional;
Change Controller: IESG;
Reference: Section 4.4 of this specification;
Algorithm Analysis Document(s): Section 4.4 of this specification.
10.2.6. JOSE Algorithms Registration (2/2)
This section registers the following value in the IANA "JSON Web
Signature and Encryption Algorithms" registry [IANA.JOSE.Algorithms].
Algorithm Name: ECDH448;
Algorithm Description: NIST-compliant co-factor Diffie-Hellman w/
curve Wei25519 and key derivation function HKDF SHA512;
Algorithm Usage Locations: alg;
JOSE Implementation Requirements: Optional;
Change Controller: IESG;
Reference: Section 4.4 of this specification (for key derivation,
see Section 5 of [SP-800-56c]);
Algorithm Analysis Document(s): Section 4.4 of this specification
(for key derivation, see Section 5 of [SP-800-56c]).
11. Acknowledgements
Thanks to Nikolas Rosener for discussions surrounding implementation
details of the techniques described in this document and to Phillip
Hallam-Baker for triggering inclusion of verbiage on the use of
Struik Expires September 10, 2020 [Page 18]
Internet-Draft lwig-curve-representations March 2020
Montgomery ladders with recovery of the y-coordinate. Thanks to
Stanislav Smyshlyaev and Vasily Nikolaev for their careful reviews.
12. References
12.1. Normative References
[ANSI-X9.62]
ANSI X9.62-2005, "Public Key Cryptography for the
Financial Services Industry: The Elliptic Curve Digital
Signature Algorithm (ECDSA)", American National Standard
for Financial Services, Accredited Standards Committee X9,
Inc, Anapolis, MD, 2005.
[FIPS-180-4]
FIPS 180-4, "Secure Hash Standard (SHS), Federal
Information Processing Standards Publication 180-4", US
Department of Commerce/National Institute of Standards and
Technology, Gaithersburg, MD, August 2015.
[FIPS-186-4]
FIPS 186-4, "Digital Signature Standard (DSS), Federal
Information Processing Standards Publication 186-4", US
Department of Commerce/National Institute of Standards and
Technology, Gaithersburg, MD, July 2013.
[FIPS-202]
FIPS 202, "SHA-3 Standard: Permutation-Based Hash and
Extendable-Output Functions, Federal Information
Processing Standards Publication 202", US Department of
Commerce/National Institute of Standards and
Technology, Gaithersburg, MD, August 2015.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
.
[RFC5639] Lochter, M. and J. Merkle, "Elliptic Curve Cryptography
(ECC) Brainpool Standard Curves and Curve Generation",
RFC 5639, DOI 10.17487/RFC5639, March 2010,
.
[RFC7696] Housley, R., "Guidelines for Cryptographic Algorithm
Agility and Selecting Mandatory-to-Implement Algorithms",
BCP 201, RFC 7696, DOI 10.17487/RFC7696, November 2015,
.
Struik Expires September 10, 2020 [Page 19]
Internet-Draft lwig-curve-representations March 2020
[RFC7748] Langley, A., Hamburg, M., and S. Turner, "Elliptic Curves
for Security", RFC 7748, DOI 10.17487/RFC7748, January
2016, .
[RFC7942] Sheffer, Y. and A. Farrel, "Improving Awareness of Running
Code: The Implementation Status Section", BCP 205,
RFC 7942, DOI 10.17487/RFC7942, July 2016,
.
[RFC8032] Josefsson, S. and I. Liusvaara, "Edwards-Curve Digital
Signature Algorithm (EdDSA)", RFC 8032,
DOI 10.17487/RFC8032, January 2017,
.
[RFC8152] Schaad, J., "CBOR Object Signing and Encryption (COSE)",
RFC 8152, DOI 10.17487/RFC8152, July 2017,
.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, .
[SEC1] SEC1, "SEC 1: Elliptic Curve Cryptography, Version 2.0",
Standards for Efficient Cryptography, , June 2009.
[SEC2] SEC2, "SEC 2: Elliptic Curve Cryptography, Version 2.0",
Standards for Efficient Cryptography, , January 2010.
[SP-800-56a]
NIST SP 800-56a, "Recommendation for Pair-Wise Key
Establishment Schemes Using Discrete Log Cryptography,
Revision 3", US Department of Commerce/National Institute
of Standards and Technology, Gaithersburg, MD, April 2018.
[SP-800-56c]
NIST SP 800-56c, "Recommendation for Key-Derivation
Methods in Key-Establishment Schemes, Revision 1", US
Department of Commerce/National Institute of Standards and
Technology, Gaithersburg, MD, April 2018.
12.2. Informative References
[ECC] I.F. Blake, G. Seroussi, N.P. Smart, "Elliptic Curves in
Cryptography", Cambridge University Press, Lecture Notes
Series 265, July 1999.
Struik Expires September 10, 2020 [Page 20]
Internet-Draft lwig-curve-representations March 2020
[ECC-Isogeny]
E. Brier, M. Joye, "Fast Point Multiplication on Elliptic
Curves through Isogenies", AAECC, Lecture Notes in
Computer Science, Vol. 2643, New York: Springer-Verlag,
2003.
[GECC] D. Hankerson, A.J. Menezes, S.A. Vanstone, "Guide to
Elliptic Curve Cryptography", New York: Springer-Verlag,
2004.
[IANA.COSE.Algorithms]
IANA, "COSE Algorithms", IANA,
https://www.iana.org/assignments/cose/
cose.xhtml#algorithms.
[IANA.COSE.Curves]
IANA, "COSE Elliptic Curves", IANA,
https://www.iana.org/assignments/cose/cose.xhtml#elliptic-
curves.
[IANA.JOSE.Algorithms]
IANA, "JSON Web Signature and Encryption Algorithms",
IANA,
https://www.iana.org/assignments/jose/jose.xhtml#web-
signature-encryption-algorithms.
[IANA.JOSE.Curves]
IANA, "JSON Web Key Elliptic Curve", IANA,
https://www.iana.org/assignments/jose/jose.xhtml#web-key-
elliptic-curve.
[Mont-Ladder]
P.L. Montgomery, "Speeding the Pollard and Elliptic Curve
Methods of Factorization", Mathematics of
Computation, Vol. 48, 1987.
[Rosener] N. Rosener, "Evaluating the Performance of Transformations
Between Curve Representations in Elliptic Curve
Cryptography for Constrained Device Security",
M.Sc. Universitat Bremen, August 2018.
[SWUmap] E. Brier, J-S. Coron, Th. Icart, D. Madore, H. Randriam,
M. Tibouchi, "Efficient Indifferentiable Hashing into
Ordinary Elliptic Curves", CRYPTO 2010, Lecture Notes in
Computer Science, Vol. 6223, New York: Springer-Verlag,
2010.
Struik Expires September 10, 2020 [Page 21]
Internet-Draft lwig-curve-representations March 2020
[tEd] D.J. Bernstein, P. Birkner, M. Joye, T. Lange, C. Peters,
"Twisted Edwards Curves", Africacrypt 2008, Lecture Notes
in Computer Science, Vol. 5023, New York: Springer-Verlag,
2008.
[tEd-Formulas]
H. Hisil, K.K.H. Wong, G. Carter, E. Dawson, "Twisted
Edwards Curves Revisited", ASIACRYPT 2008, Lecture Notes
in Computer Science, Vol. 5350, New York: Springer-Verlag,
2008.
[Tibouchi]
M. Tibouchi, "Elligator Squared -- Uniform Points on
Elliptic Curves of Prime Order as Uniform Random Strings",
Financial Cryptography 2014, Lecture Notes in Computer
Science, Vol. 8437, New York: Springer-Verlag, 2014.
[Wei-Ladder]
T. Izu, Ts. Takagi,, "A Fast Parallel Elliptic Curve
Multiplication Resistant Against Side Channel Attacks",
Centre for Applied Cryptographic Research, Corr 2002-03,
2002.
Appendix A. Some (Non-Binary) Elliptic Curves
This section defines the three different curve models we consider,
viz. short-Weierstrass curves, Montgomery curves, and twisted Edwards
curves.
A.1. Curves in Short-Weierstrass Form
Let GF(q) denote the finite field with q elements, where q is an odd
prime power and where q is not divisible by three. Let W_{a,b} be
the Weierstrass curve with defining equation Y^2 = X^3 + a*X + b,
where a and b are elements of GF(q) and where 4*a^3 + 27*b^2 is
nonzero. The points of W_{a,b} are the ordered pairs (X, Y) whose
coordinates are elements of GF(q) and that satisfy the defining
equation (the so-called affine points), together with the special
point O (the so-called "point at infinity"). This set forms a group
under addition, via the so-called "chord-and-tangent" rule, where the
point at infinity serves as the identity element. See Appendix C.1
for details of the group operation.
A.2. Montgomery Curves
Let GF(q) denote the finite field with q elements, where q is an odd
prime power. Let M_{A,B} be the Montgomery curve with defining
equation B*v^2 = u^3 + A*u^2 + u, where A and B are elements of GF(q)
Struik Expires September 10, 2020 [Page 22]
Internet-Draft lwig-curve-representations March 2020
and where A is unequal to (+/-)2 and where B is nonzero. The points
of M_{A,B} are the ordered pairs (u, v) whose coordinates are
elements of GF(q) and that satisfy the defining equation (the so-
called affine points), together with the special point O (the so-
called "point at infinity"). This set forms a group under addition,
via the so-called "chord-and-tangent" rule, where the point at
infinity serves as the identity element. See Appendix C.2 for
details of the group operation.
A.3. Twisted Edwards Curves
Let GF(q) denote the finite field with q elements, where q is an odd
prime power. Let E_{a,d} be the twisted Edwards curve with defining
equation a*x^2 + y^2 = 1+ d*x^2*y^2, where a and d are distinct
nonzero elements of GF(q). The points of E_{a,d} are the ordered
pairs (x, y) whose coordinates are elements of GF(q) and that satisfy
the defining equation (the so-called affine points). It can be shown
that this set forms a group under addition if a is a square in GF(q),
whereas d is not, where the point O:=(0, 1) serves as the identity
element. (Note that the identity element satisfies the defining
equation.) See Appendix C.3 for details of the group operation.
An Edwards curve is a twisted Edwards curve with a=1.
Appendix B. Elliptic Curve Nomenclature and Finite Fields
This section provides brief background information on elliptic curves
and finite fields that should be sufficient to understand
constructions and examples in this document.
B.1. Elliptic Curve Nomenclature
Each curve defined in Appendix A forms a commutative group under
addition (denoted by '+'). In Appendix C we specify the group laws,
which depend on the curve model in question. For completeness, we
here include some common elliptic curve nomenclature and basic
properties (primarily so as to keep this document self-contained).
These notions are mainly used in Appendix E and Appendix G and not
essential for our exposition. This section can be skipped at first
reading.
Any point P of a curve E is a generator of the cyclic subgroup
(P):={k*P | k = 0, 1, 2,...} of the curve. (Here, k*P denotes the
sum of k copies of P, where 0*P is the identity element O of the
curve; k*P is commonly referred to as scalar multiplication of P by
k.) If (P) has cardinality l, then l is called the order of P. The
order of curve E is the cardinality of the set of its points,
commonly denoted by |E|. A curve is cyclic if it is generated by some
Struik Expires September 10, 2020 [Page 23]
Internet-Draft lwig-curve-representations March 2020
point of this curve. All curves of prime order are cyclic, while all
curves of order h*n, where n is a large prime number and where h is a
small number (the so-called co-factor), have a large cyclic subgroup
of prime order n. In this case, a generator of order n is called a
base point, commonly denoted by G. A point of order dividing h is
said to be in the small subgroup. For curves of prime order, this
small subgroup is the singleton set, consisting of only the identity
element O. A point that is not in the small subgroup is said to be a
high-order point (since it has order at least n).
If R is a point of the curve that is also contained in (P), there is
a unique integer k in the interval [0, l-1] so that R=k*P, where l is
the order of P. This number is called the discrete logarithm of R to
the base P. The discrete logarithm problem is the problem of finding
the discrete logarithm of R to the base P for any two points P and R
of the curve, if such a number exists.
If P is a fixed base point G of the curve, the pair (k, R:=k*G) is
commonly called a public-private key pair, the integer k the private
key, and the point R the corresponding public key. The private key k
can be represented as an integer in the interval [0,n-1], where G has
order n. If this representation is nonzero, R has order n;
otherwise, it has order one and is the identity element O of the
curve.
In this document, a quadratic twist of a curve E defined over a field
GF(q) is a curve E' related to E, with cardinality |E'|,
where |E|+|E'|=2*(q+1). If E is a curve in one of the curve models
specified in this document, a quadratic twist of this curve can be
expressed using the same curve model, although (naturally) with its
own curve parameters. Two curves E and E' defined over a field GF(q)
are said to be isogenous if these have the same order and are said to
be isomorphic if these have the same group structure. Note that
isomorphic curves have necessarily the same order and are, thus, a
special type of isogenous curves. Further details are out of scope.
Weierstrass curves can have prime order, whereas Montgomery curves
and twisted Edwards curves always have an order that is a multiple of
four (and, thereby, a small subgroup of cardinality four).
An ordered pair (x, y) whose coordinates are elements of GF(q) can be
associated with any ordered triple of the form [x*z: y*z: z], where z
is a nonzero element of GF(q), and can be uniquely recovered from
such a representation. The latter representation is commonly called
a representation in projective coordinates. Sometimes, yet other
representations are useful (e.g., representation in Jacobian
coordinates). Further details are out of scope.
Struik Expires September 10, 2020 [Page 24]
Internet-Draft lwig-curve-representations March 2020
The group laws in Appendix C are mostly expressed in terms of affine
points, but can also be expressed in terms of the representation of
these points in projective coordinates, thereby allowing clearing of
denominators. The group laws may also involve non-affine points
(such as the point at infinity O of a Weierstrass curve or of a
Montgomery curve). Those can also be represented in projective
coordinates. Further details are out of scope.
B.2. Finite Fields
The field GF(q), where q is a prime power, is defined as follows.
If q:=p is a prime number, the field GF(p) consists of the integers
in the interval [0,p-1] and two binary operations on this set:
addition and multiplication modulo p. This field is commonly called
a prime field.
If q:=p^m, where p is a prime number and where m>0, the field GF(q)
is defined in terms of an irreducible polynomial f(z) in z of degree
m with coefficients in GF(p) (i.e., f(z) cannot be written as the
product of two polynomials in z of lower degree with coefficients in
GF(p)): in this case, GF(q) consists of the polynomials in z of
degree smaller than m with coefficients in GF(p) and two binary
operations on this set: polynomial addition and polynomial
multiplication modulo the irreducible polynomial f(z). By
definition, each element x of GF(q) is a polynomial in z of degree
smaller than m and can, therefore, be uniquely represented as a
vector (x_{m-1}, x_{m-2}, ..., x_1, x_0) of length m with
coefficients in GF(p), where x_i is the coefficient of z^i of
polynomial x. Note that this representation depends on the
irreducible polynomial f(z) of the field GF(p^m) in question (which
is often fixed in practice). Note that GF(q) contains the prime
field GF(p) as a subset. If m=1, the definitions of GF(p) and
GF(p^1) above coincide, since each nonzero element of GF(p) can be
viewed as a polynomial in z of degree zero. If m>1, then GF(q) is
called a (nontrivial) extension field of GF(p). The number p is
called the characteristic of GF(q).
A field element y is called a square in GF(q) if it can be expressed
as y:=x^2 for some x in GF(q); it is called a non-square in GF(q)
otherwise. If y is a square in GF(q), we denote by sqrt(y) one of
its square roots (the other one being -sqrt(y)). For methods for
computing square roots and inverses in GF(q) - if these exist - see
Appendix K.1 and Appendix K.2, respectively. For methods for mapping
a nonzero field element that is not a square in GF(q) to a point of a
curve, see Appendix K.3.
Struik Expires September 10, 2020 [Page 25]
Internet-Draft lwig-curve-representations March 2020
NOTE: The curves in Appendix E and Appendix G are all defined over a
prime field GF(p), thereby reducing all operations to simple modular
integer arithmetic. Strictly speaking we could, therefore, have
refrained from introducing extension fields. Nevertheless, we
included the more general exposition, so as to accommodate potential
introduction of new curves that are defined over a (nontrivial)
extension field at some point in the future. This includes curves
proposed for post-quantum isogeny-based schemes, which are defined
over a quadratic extension field (i.e., where q:=p^2), and elliptic
curves used with pairing-based cryptography. The exposition in
either case is almost the same and now automatically yields, e.g.,
data conversion routines for any finite field object (see
Appendix I). Readers not interested in this, could simply view all
fields as prime fields.
Appendix C. Elliptic Curve Group Operations
This section specifies group operations for elliptic curves in short-
Weierstrass form, for Montgomery curves, and for twisted Edwards
curves.
C.1. Group Laws for Weierstrass Curves
For each point P of the Weierstrass curve W_{a,b}, the point at
infinity O serves as identity element, i.e., P + O = O + P = P.
For each affine point P:=(X, Y) of the Weierstrass curve W_{a,b}, the
point -P is the point (X, -Y) and one has P + (-P) = O (i.e., -P is
the inverse of P). For the point at infinity O, one has -O:=O.
Let P1:=(X1, Y1) and P2:=(X2, Y2) be distinct affine points of the
Weierstrass curve W_{a,b} and let Q:=P1 + P2, where Q is not the
identity element. Then Q:=(X, Y), where
X + X1 + X2 = lambda^2 and Y + Y1 = lambda*(X1 - X), where
lambda:= (Y2 - Y1)/(X2 - X1).
Let P:=(X1, Y1) be an affine point of the Weierstrass curve W_{a,b}
and let Q:=2*P, where Q is not the identity element. Then Q:=(X, Y),
where
X + 2*X1 = lambda^2 and Y + Y1 = lambda*(X1 - X), where
lambda:=(3*X1^2 + a)/(2*Y1).
From the group laws above it follows that if P=(X, Y), P1=(X1, Y1),
and P2=(X2, Y2) are distinct affine points of the Weierstrass curve
Struik Expires September 10, 2020 [Page 26]
Internet-Draft lwig-curve-representations March 2020
W_{a,b} with P2:=P+P1 and if Y is nonzero, then the Y-coordinate of
P1 can be expressed in terms of the X-coordinates of P, P1, and P2,
and the Y-coordinate of P, since
2*Y*Y1=(X*X1+a)*(X+X1)+2*b-X2*(X-X1)^2.
This property allows recovery of the Y-coordinate of a point P1=k*P
that is computed via the so-called Montgomery ladder, where P is an
affine point with nonzero Y-coordinate (i.e., it does not have order
two). For future reference, note that the expression above uniquely
determines the X-coordinate of P2 in terms of the X-coordinates of P
and P1 and the product of their Y-coordinates. Further details are
out of scope.
C.2. Group Laws for Montgomery Curves
For each point P of the Montgomery curve M_{A,B}, the point at
infinity O serves as identity element, i.e., P + O = O + P = P.
For each affine point P:=(u, v) of the Montgomery curve M_{A,B}, the
point -P is the point (u, -v) and one has P + (-P) = O (i.e., -P is
the inverse of P). For the point at infinity O, one has -O:=O.
Let P1:=(u1, v1) and P2:=(u2, v2) be distinct affine points of the
Montgomery curve M_{A,B} and let Q:=P1 + P2, where Q is not the
identity element. Then Q:=(u, v), where
u + u1 + u2 = B*lambda^2 - A and v + v1 = lambda*(u1 - u), where
lambda:=(v2 - v1)/(u2 - u1).
Let P:=(u1, v1) be an affine point of the Montgomery curve M_{A,B}
and let Q:=2*P, where Q is not the identity element. Then Q:=(u, v),
where
u + 2*u1 = B*lambda^2 - A and v + v1 = lambda*(u1 - u), where
lambda:=(3*u1^2 + 2*A*u1+1)/(2*B*v1).
From the group laws above it follows that if P=(u, v), P1=(u1, v1),
and P2=(u2, v2) are distinct affine points of the Montgomery curve
M_{A,B} with P2:=P+P1 and if v is nonzero, then the v-coordinate of
P1 can be expressed in terms of the u-coordinates of P, P1, and P2,
and the v-coordinate of P, since
2*B*v*v1=(u*u1+1)*(u+u1+2*A)-2*A-u2*(u-u1)^2.
Struik Expires September 10, 2020 [Page 27]
Internet-Draft lwig-curve-representations March 2020
This property allows recovery of the v-coordinate of a point P1=k*P
that is computed via the so-called Montgomery ladder, where P is an
affine point with nonzero v-coordinate (i.e., it does not have order
two). For future reference, note that the expression above uniquely
determines the u-coordinate of P2 in terms of the u-coordinates of P
and P1 and the product of their v-coordinates. Further details are
out of scope.
C.3. Group Laws for Twisted Edwards Curves
Note: The group laws below hold for twisted Edwards curves E_{a,d}
where a is a square in GF(q), whereas d is not. In this case, the
addition formulae below are defined for each pair of points, without
exceptions. Generalizations of this group law to other twisted
Edwards curves are out of scope.
For each point P of the twisted Edwards curve E_{a,d}, the point
O:=(0,1) serves as identity element, i.e., P + O = O + P = P.
For each point P:=(x, y) of the twisted Edwards curve E_{a,d}, the
point -P is the point (-x, y) and one has P + (-P) = O (i.e., -P is
the inverse of P).
Let P1:=(x1, y1) and P2:=(x2, y2) be points of the twisted Edwards
curve E_{a,d} and let Q:=P1 + P2. Then Q:=(x, y), where
x = (x1*y2 + x2*y1)/(1 + d*x1*x2*y1*y2) and
y = (y1*y2 - a*x1*x2)/(1 - d*x1*x2*y1*y2).
Let P:=(x1, y1) be a point of the twisted Edwards curve E_{a,d} and
let Q:=2*P. Then Q:=(x, y), where
x = (2*x1*y1)/(1 + d*x1^2*y1^2) and
y = (y1^2 - a*x1^2)/(1 - d*x1^2*y1^2).
Note that one can use the formulae for point addition for point
doubling, taking inverses, and adding the identity element as well
(i.e., the point addition formulae are uniform and complete (subject
to our Note above)).
From the group laws above (subject to our Note above) it follows that
if P=(x, y), P1=(x1, y1), and P2=P=(x2, y2) are points of the twisted
Edwards curve E_{a,d} with P2:=P+P1 and if x is nonzero, then the
x-coordinate of P1 can be expressed in terms of the y-coordinates of
P, P1, and P2, and the x-coordinate of P, since
Struik Expires September 10, 2020 [Page 28]
Internet-Draft lwig-curve-representations March 2020
x*x1*(a-d*y*y1*y2)=y*y1-y2.
(Here, observe that a-d*y*y1*y2 is nonzero per our Note above.) This
property allows recovery of the x-coordinate of a point P1=k*P that
is computed via the so-called Montgomery ladder, where P is an affine
point with nonzero x-coordinate (i.e., it does not have order one or
two). For future reference, note that the group law (subject to our
Note above) uniquely determines the y-coordinate of P2 in terms of
the y-coordinates of P and P1 and the product of their x-coordinates.
Further details are out of scope.
Appendix D. Relationship Between Curve Models
The non-binary curves specified in Appendix A are expressed in
different curve models, viz. as curves in short-Weierstrass form, as
Montgomery curves, or as twisted Edwards curves. These curve models
are related, as follows.
D.1. Mapping between Twisted Edwards Curves and Montgomery Curves
One can map points of the Montgomery curve M_{A,B} to points of the
twisted Edwards curve E_{a,d}, where a:=(A+2)/B and d:=(A-2)/B and,
conversely, map points of the twisted Edwards curve E_{a,d} to points
of the Montgomery curve M_{A,B}, where A:=2*(a+d)/(a-d) and where
B:=4/(a-d). For twisted Edwards curves we consider (i.e., those
where a is a square in GF(q), whereas d is not), this defines a one-
to-one correspondence, which - in fact - is an isomorphism between
M_{A,B} and E_{a,d}, thereby showing that, e.g., the discrete
logarithm problem in either curve model is equally hard.
For the Montgomery curves and twisted Edwards curves we consider, the
mapping from M_{A,B} to E_{a,d} is defined by mapping the point at
infinity O and the point (0, 0) of order two of M_{A,B} to,
respectively, the point (0, 1) and the point (0, -1) of order two of
E_{a,d}, while mapping each other point (u, v) of M_{A,B} to the
point (x,y):=(u/v,(u-1)/(u+1)) of E_{a,d}. The inverse mapping from
E_{a,d} to M_{A,B} is defined by mapping the point (0, 1) and the
point (0, -1) of order two of E_{a,d} to, respectively, the point at
infinity O and the point (0, 0) of order two of M_{A,B}, while each
other point (x, y) of E_{a,d} is mapped to the point
(u,v):=((1+y)/(1-y),(1+y)/((1-y)*x)) of M_{A,B}.
Implementations may take advantage of this mapping to carry out
elliptic curve group operations originally defined for a twisted
Edwards curve on the corresponding Montgomery curve, or vice-versa,
and translating the result back to the original curve, thereby
potentially allowing code reuse.
Struik Expires September 10, 2020 [Page 29]
Internet-Draft lwig-curve-representations March 2020
D.2. Mapping between Montgomery Curves and Weierstrass Curves
One can map points of the Montgomery curve M_{A,B} to points of the
Weierstrass curve W_{a,b}, where a:=(3-A^2)/(3*B^2) and
b:=(2*A^3-9*A)/(27*B^3). This defines a one-to-one correspondence,
which - in fact - is an isomorphism between M_{A,B} and W_{a,b},
thereby showing that, e.g., the discrete logarithm problem in either
curve model is equally hard.
The mapping from M_{A,B} to W_{a,b} is defined by mapping the point
at infinity O of M_{A,B} to the point at infinity O of W_{a,b}, while
mapping each other point (u,v) of M_{A,B} to the point
(X,Y):=((u+A/3)/B,v/B) of W_{a,b}.
Note that not all Weierstrass curves can be injectively mapped to
Montgomery curves, since the latter have a point of order two and the
former may not. In particular, if a Weierstrass curve has prime
order, such as is the case with the so-called "NIST prime curves",
this inverse mapping is not defined.
If the Weierstrass curve W_{a,b} has a point (alpha,0) of order two
and c:=a+3*(alpha)^2 is a square in GF(q), one can map points of this
curve to points of the Montgomery curve M_{A,B}, where A:=3*alpha/
gamma and B:=1/gamma and where gamma is any square root of c. In
this case, the mapping from W_{a,b} to M_{A,B} is defined by mapping
the point at infinity O of W_{a,b} to the point at infinity O of
M_{A,B}, while mapping each other point (X,Y) of W_{a,b} to the point
(u,v):=((X-alpha)/gamma,Y/gamma) of M_{A,B}. As before, this defines
a one-to-one correspondence, which - in fact - is an isomorphism
between W_{a,b} and M_{A,B}. It is easy to see that the mapping from
W_{a,b} to M_{A,B} and that from M_{A,B} to W_{a,b} (if defined) are
each other's inverse.
This mapping can be used to implement elliptic curve group operations
originally defined for a twisted Edwards curve or for a Montgomery
curve using group operations for the corresponding elliptic curve in
short-Weierstrass form and translating the result back to the
original curve, thereby potentially allowing code reuse.
Note that implementations for elliptic curves with short-Weierstrass
form that hard-code the domain parameter a to a= -3 (which value is
known to allow more efficient implementations) cannot always be used
this way, since the curve W_{a,b} resulting from an isomorphic
mapping cannot always be expressed as a Weierstrass curve with a=-3
via a coordinate transformation. For more details, see Appendix F.
Struik Expires September 10, 2020 [Page 30]
Internet-Draft lwig-curve-representations March 2020
D.3. Mapping between Twisted Edwards Curves and Weierstrass Curves
One can map points of the twisted Edwards curve E_{a,d} to points of
the Weierstrass curve W_{a,b}, via function composition, where one
uses the isomorphic mapping between twisted Edwards curves and
Montgomery curves of Appendix D.1 and the one between Montgomery and
Weierstrass curves of Appendix D.2. Obviously, one can use function
composition (now using the respective inverses - if these exist) to
realize the inverse of this mapping.
Appendix E. Curve25519 and Cousins
This section introduces curves related to Curve25519 and explains
their relationships.
E.1. Curve Definition and Alternative Representations
The elliptic curve Curve25519 is the Montgomery curve M_{A,B} defined
over the prime field GF(p), with p:=2^{255}-19, where A:=486662 and
B:=1. This curve has order h*n, where h=8 and where n is a prime
number. For this curve, A^2-4 is not a square in GF(p), whereas A+2
is. The quadratic twist of this curve has order h1*n1, where h1=4
and where n1 is a prime number. For this curve, the base point is
the point (Gu, Gv), where Gu=9 and where Gv is an odd integer in the
interval [0, p-1].
This curve has the same group structure as (is "isomorphic" to) the
twisted Edwards curve E_{a,d} defined over GF(p), with as base point
the point (Gx, Gy), where parameters are as specified in
Appendix E.3. This curve is denoted as Edwards25519. For this
curve, the parameter a is a square in GF(p), whereas d is not, so the
group laws of Appendix C.3 apply.
The curve is also isomorphic to the elliptic curve W_{a,b} in short-
Weierstrass form defined over GF(p), with as base point the point
(GX, GY), where parameters are as specified in Appendix E.3. This
curve is denoted as Wei25519.
E.2. Switching between Alternative Representations
Each affine point (u, v) of Curve25519 corresponds to the point (X,
Y):=(u + A/3, v) of Wei25519, while the point at infinity of
Curve25519 corresponds to the point at infinity of Wei25519. (Here,
we used the mappings of Appendix D.2 and that B=1.) Under this
mapping, the base point (Gu, Gv) of Curve25519 corresponds to the
base point (GX, GY) of Wei25519. The inverse mapping maps the affine
point (X, Y) of Wei25519 to (u, v):=(X - A/3, Y) of Curve25519, while
mapping the point at infinity of Wei25519 to the point at infinity of
Struik Expires September 10, 2020 [Page 31]
Internet-Draft lwig-curve-representations March 2020
Curve25519. Note that this mapping involves a simple shift of the
first coordinate and can be implemented via integer-only arithmetic
as a shift of (p+A)/3 for the isomorphic mapping and a shift of
-(p+A)/3 for its inverse, where delta=(p+A)/3 is the element of GF(p)
defined by
delta 19298681539552699237261830834781317975544997444273427339909597
334652188435537
(=0x2aaaaaaa aaaaaaaa aaaaaaaa aaaaaaaa aaaaaaaa aaaaaaaa
aaaaaaaa aaad2451).
(Note that, depending on the implementation details of the field
arithmetic, one may have to shift the result by +p or -p if this
integer is not in the interval [0,p-1].)
The curve Edwards25519 is isomorphic to the curve Curve25519, where
the base point (Gu, Gv) of Curve25519 corresponds to the base point
(Gx,Gy) of Edwards25519 and where the point at infinity and the point
(0,0) of order two of Curve25519 correspond to, respectively, the
point (0, 1) and the point (0, -1) of order two of Edwards25519 and
where each other point (u, v) of Curve25519 corresponds to the point
(c*u/v, (u-1)/(u+1)) of Edwards25519, where c is the element of GF(p)
defined by
c sqrt(-(A+2)/B)
51042569399160536130206135233146329284152202253034631822681833788
666877215207
(=0x70d9120b 9f5ff944 2d84f723 fc03b081 3a5e2c2e b482e57d
3391fb55 00ba81e7).
(Here, we used the mapping of Appendix D.1 and normalized this using
the mapping of Appendix F.1 (where the element s of that appendix is
set to c above).) The inverse mapping from Edwards25519 to
Curve25519 is defined by mapping the point (0, 1) and the point (0,
-1) of order two of Edwards25519 to, respectively, the point at
infinity and the point (0,0) of order two of Curve25519 and having
each other point (x, y) of Edwards25519 correspond to the point ((1 +
y)/(1 - y), c*(1 + y)/((1-y)*x)) of Curve25519.
The curve Edwards25519 is isomorphic to the Weierstrass curve
Wei25519, where the base point (Gx, Gy) of Edwards25519 corresponds
to the base point (GX,GY) of Wei25519 and where the identity element
(0,1) and the point (0,-1) of order two of Edwards25519 correspond
to, respectively, the point at infinity O and the point (A/3, 0) of
order two of Wei25519 and where each other point (x, y) of
Struik Expires September 10, 2020 [Page 32]
Internet-Draft lwig-curve-representations March 2020
Edwards25519 corresponds to the point (X, Y):=((1+y)/(1-y)+A/3,
c*(1+y)/((1-y)*x)) of Wei25519, where c was defined before. (Here,
we used the mapping of Appendix D.3.) The inverse mapping from
Wei25519 to Edwards25519 is defined by mapping the point at infinity
O and the point (A/3, 0) of order two of Wei25519 to, respectively,
the identity element (0,1) and the point (0,-1) of order two of
Edwards25519 and having each other point (X, Y) of Wei25519
correspond to the point (c*(X-A/3)/Y, (X-A/3-1)/(X-A/3+1)) of
Edwards25519.
Note that these mappings can be easily realized if points are
represented in projective coordinates, using a few field
multiplications only, thus allowing switching between alternative
curve representations with negligible relative incremental cost.
E.3. Domain Parameters
The parameters of the Montgomery curve and the corresponding
isomorphic curves in twisted Edwards curve and short-Weierstrass form
are as indicated below. Here, the domain parameters of the
Montgomery curve Curve25519 and of the twisted Edwards curve
Edwards25519 are as specified in [RFC7748]; the domain parameters of
Wei25519 are "new".
General parameters (for all curve models):
p 2^{255}-19
(=0x7fffffff ffffffff ffffffff ffffffff ffffffff ffffffff
ffffffff ffffffed)
h 8
n 72370055773322622139731865630429942408571163593799076060019509382
85454250989
(=2^{252} + 0x14def9de a2f79cd6 5812631a 5cf5d3ed)
h1 4
n1 14474011154664524427946373126085988481603263447650325797860494125
407373907997
(=2^{253} - 0x29bdf3bd 45ef39ac b024c634 b9eba7e3)
Montgomery curve-specific parameters (for Curve25519):
A 486662 (=0x076d06)
Struik Expires September 10, 2020 [Page 33]
Internet-Draft lwig-curve-representations March 2020
B 1 (=0x01)
Gu 9 (=0x09)
Gv 14781619447589544791020593568409986887264606134616475288964881837
755586237401
(=0x20ae19a1 b8a086b4 e01edd2c 7748d14c 923d4d7e 6d7c61b2
29e9c5a2 7eced3d9)
Twisted Edwards curve-specific parameters (for Edwards25519):
a -1 (-0x01)
d -121665/121666 = - (A-2)/(A+2)
(=370957059346694393431380835087545651895421138798432190163887855
33085940283555)
(=0x52036cee 2b6ffe73 8cc74079 7779e898 00700a4d 4141d8ab
75eb4dca 135978a3)
Gx 15112221349535400772501151409588531511454012693041857206046113283
949847762202
(=0x216936d3 cd6e53fe c0a4e231 fdd6dc5c 692cc760 9525a7b2
c9562d60 8f25d51a)
Gy 4/5
(=463168356949264781694283940034751631413079938662562256157830336
03165251855960)
(=0x66666666 66666666 66666666 66666666 66666666 66666666
66666666 66666658)
Weierstrass curve-specific parameters (for Wei25519):
a 19298681539552699237261830834781317975544997444273427339909597334
573241639236
(=0x2aaaaaaa aaaaaaaa aaaaaaaa aaaaaaaa aaaaaaaa aaaaaaaa
aaaaaa98 4914a144)
b 55751746669818908907645289078257140818241103727901012315294400837
956729358436
Struik Expires September 10, 2020 [Page 34]
Internet-Draft lwig-curve-representations March 2020
(=0x7b425ed0 97b425ed 097b425e d097b425 ed097b42 5ed097b4
260b5e9c 7710c864)
GX 19298681539552699237261830834781317975544997444273427339909597334
652188435546
(=0x2aaaaaaa aaaaaaaa aaaaaaaa aaaaaaaa aaaaaaaa aaaaaaaa
aaaaaaaa aaad245a)
GY 14781619447589544791020593568409986887264606134616475288964881837
755586237401
(=0x20ae19a1 b8a086b4 e01edd2c 7748d14c 923d4d7e 6d7c61b2
29e9c5a2 7eced3d9)
Appendix F. Further Mappings
The non-binary curves specified in Appendix A are expressed in
different curve models, viz. as curves in short-Weierstrass form, as
Montgomery curves, or as twisted Edwards curves. In Appendix D we
already described relationships between these various curve models.
Further mappings exist between elliptic curves within the same curve
model. These can be exploited to force some of the domain parameters
to specific values that allow for a more efficient implementation of
the addition formulae.
F.1. Isomorphic Mapping between Twisted Edwards Curves
One can map points of the twisted Edwards curve E_{a,d} to points of
the twisted Edwards curve E_{a',d'}, where a:=a'*s^2 and d:=d'*s^2
for some nonzero element s of GF(q). This defines a one-to-one
correspondence, which - in fact - is an isomorphism between E_{a,d}
and E_{a',d'}.
The mapping from E_{a,d} to E_{a',d'} is defined by mapping the point
(x,y) of E_{a,d} to the point (x', y'):=(s*x, y) of E_{a',d'}. The
inverse mapping from E_{a',d'} to E_{a,d} is defined by mapping the
point (x', y') of E_{a',d'} to the point (x, y):=(x'/s, y') of
E_{a,d}.
Implementations may take advantage of this mapping to carry out
elliptic curve group operations originally defined for a twisted
Edwards curve with generic domain parameters a and d on a
corresponding isomorphic twisted Edwards curve with domain parameters
a' and d' that have a more special form and that are known to allow
for more efficient implementations of addition laws and translating
the result back to the original curve. In particular, it is known
Struik Expires September 10, 2020 [Page 35]
Internet-Draft lwig-curve-representations March 2020
that such efficiency improvements exist if a':=(+/-)1 (see
[tEd-Formulas]).
F.2. Isomorphic Mapping between Montgomery Curves
One can map points of the Montgomery curve M_{A,B} to points of the
Montgomery curve M_{A',B'}, where A:=A' and B:=B'*s^2 for some
nonzero element s of GF(q). This defines a one-to-one
correspondence, which - in fact - is an isomorphism between M_{A,B}
and M_{A',B'}.
The mapping from M_{A,B} to M_{A',B'} is defined by mapping the point
at infinity O of M_{A,B} to the point at infinity O of M_{A',B'},
while mapping each other point (u,v) of M_{A,B} to the point (u',
v'):=(u, s*v) of M_{A',B'}. The inverse mapping from M_{A',B'} to
M_{A,B} is defined by mapping the point at infinity O of M_{A',B'} to
the point at infinity O of M_{A,B}, while mapping each other point
(u',v') of M_{A',B'} to the point (u,v):=(u',v'/s) of M_{A,B}.
One can also map points of the Montgomery curve M_{A,B} to points of
the Montgomery curve M_{A',B'}, where A':=-A and B':=-B. This
defines a one-to-one correspondence, which - in fact - is an
isomorphism between M_{A,B} and M_{A',B'}.
In this case, the mapping from M_{A,B} to M_{A',B'} is defined by
mapping the point at infinity O of M_{A,B} to the point at infinity O
of M_{A',B'}, while mapping each other point (u,v) of M_{A,B} to the
point (u',v'):=(-u,v) of M_{A',B'}. The inverse mapping from
M_{A',B'} to M_{A,B} is defined by mapping the point at infinity O of
M_{A',B'} to the point at infinity O of M_{A,B}, while mapping each
other point (u',v') of M_{A',B'} to the point (u,v):=(-u',v') of
M_{A,B}.
Implementations may take advantage of these mappings to carry out
elliptic curve groups operations originally defined for a Montgomery
curve with generic domain parameters A and B on a corresponding
isomorphic Montgomery curve with domain parameters A' and B' that
have a more special form and that are known to allow for more
efficient implementations of addition laws and translating the result
back to the original curve. In particular, it is known that such
efficiency improvements exist if B' assumes a small absolute value,
such as B':=(+/-)1. (see [Mont-Ladder]).
F.3. Isomorphic Mapping between Weierstrass Curves
One can map points of the Weierstrass curve W_{a,b} to points of the
Weierstrass curve W_{a',b'}, where a':=a*s^4 and b':=b*s^6 for some
nonzero element s of GF(q). This defines a one-to-one
Struik Expires September 10, 2020 [Page 36]
Internet-Draft lwig-curve-representations March 2020
correspondence, which - in fact - is an isomorphism between W_{a,b}
and W_{a',b'}.
The mapping from W_{a,b} to W_{a',b'} is defined by mapping the point
at infinity O of W_{a,b} to the point at infinity O of W_{a',b'},
while mapping each other point (X,Y) of W_{a,b} to the point
(X',Y'):=(X*s^2, Y*s^3) of W_{a',b'}. The inverse mapping from
W_{a',b'} to W_{a,b} is defined by mapping the point at infinity O of
W_{a',b'} to the point at infinity O of W_{a,b}, while mapping each
other point (X', Y') of W_{a',b'} to the point (X,Y):=(X'/s^2,Y'/s^3)
of W_{a,b}.
Implementations may take advantage of this mapping to carry out
elliptic curve group operations originally defined for a Weierstrass
curve with generic domain parameters a and b on a corresponding
isomorphic Weierstrass curve with domain parameter a' and b' that
have a more special form and that are known to allow for more
efficient implementations of addition laws and translating the result
back to the original curve. In particular, it is known that such
efficiency improvements exist if a'=-3 (mod p), where p is the
characteristic of GF(q), and one uses so-called Jacobian coordinates
with a particular projective version of the addition laws of
Appendix C.1. While not all Weierstrass curves can be put into this
form, all traditional NIST curves have domain parameter a=-3, while
all Brainpool curves [RFC5639] are isomorphic to a Weierstrass curve
of this form via the above mapping.
Note that implementations for elliptic curves with short-Weierstrass
form that hard-code the domain parameter a to a= -3 cannot always be
used this way, since the curve W_{a,b} cannot always be expressed in
terms of a Weierstrass curve with a'=-3 via a coordinate
transformation: this only holds if a'/a is a fourth power in GF(q)
(see Section 3.1.5 of [GECC]). However, even in this case, one can
still express the curve W_{a,b} as a Weierstrass curve with a small
domain parameter value a', thereby still allowing a more efficient
implementation than with a general domain parameter value a.
F.4. Isogenous Mapping between Weierstrass Curves
One can still map points of the Weierstrass curve W_{a,b} to points
of the Weierstrass curve W_{a',b'}, where a':=-3 (mod p) and where p
is the characteristic of GF(q), even if a'/a is not a fourth power in
GF(q). In that case, this mappping cannot be an isomorphism (see
Appendix F.3). Instead, the mapping is a so-called isogeny (or
homomorphism). Since most elliptic curve operations process points
of prime order or use so-called "co-factor multiplication", in
practice the resulting mapping has similar properties as an
isomorphism. In particular, one can still take advantage of this
Struik Expires September 10, 2020 [Page 37]
Internet-Draft lwig-curve-representations March 2020
mapping to carry out elliptic curve group operations originally
defined for a Weierstrass curve with domain parameter a unequal to -3
(mod p) on a corresponding isogenous Weierstrass curve with domain
parameter a'=-3 (mod p) and translating the result back to the
original curve.
In this case, the mapping from W_{a,b} to W_{a',b'} is defined by
mapping the point at infinity O of W_{a,b} to the point at infinity O
of W_{a',b'}, while mapping each other point (X,Y) of W_{a,b} to the
point (X',Y'):=(u(X)/w(X)^2,Y*v(X)/w(X)^3) of W_{a',b'}. Here, u(X),
v(X), and w(X) are polynomials in X that depend on the isogeny in
question, as do domain parameters a' and b'. The inverse mapping
from W_{a',b'} to W_{a,b} is again an isogeny (called the dual
isogeny) and defined by mapping the point at infinity O of W_{a',b'}
to the point at infinity O of W_{a,b}, while mapping each other point
(X', Y') of W_{a',b'} to the point
(X,Y):=(u'(X')/w'(X')^2,Y'*v'(X')/w'(X')^3) of W_{a,b}, where --
again -- u'(X'), v'(X'), and w'(X') are polynomials in X' that depend
on the isogeny in question. These mappings have the property that
their composition is not the identity mapping (as was the case with
the isomorphic mappings discussed in Appendix F.3), but rather a
fixed multiple hereof: if this multiple is l then the isogeny is
called an isogeny of degree l (or l-isogeny) and u, v, and w (and,
similarly, u', v', and w') are polynomials of degrees l, 3*(l-1)/2,
and (l-1)/2, respectively. Note that an isomorphism is simply an
isogeny of degree l=1. Details of how to determine isogenies are out
of scope of this document. The above formulas assume that the
isogeny has odd degree (i.e., l is odd); detailed formulas for even-
degree isogenies are similar, but out of scope.
Implementations may take advantage of this mapping to carry out
elliptic curve group operations originally defined for a Weierstrass
curve with a generic domain parameter a on a corresponding isogenous
Weierstrass curve with domain parameter a'=-3 (mod p), where one can
use so-called Jacobian coordinates with a particular projective
version of the addition laws of Appendix C.1. Since all traditional
NIST curves have domain parameter a=-3, while all Brainpool curves
[RFC5639] are isomorphic to a Weierstrass curve of this form, this
allows taking advantage of existing implementations for these curves
that may have a hardcoded a=-3 (mod p) domain parameter, provided one
switches back and forth to this curve form using the isogenous
mapping in question.
Note that isogenous mappings can be easily realized using
representations in projective coordinates and involves roughly 3*l
finite field multiplications, thus allowing switching between
alternative representations at relatively low incremental cost
compared to that of elliptic curve scalar multiplications (provided
Struik Expires September 10, 2020 [Page 38]
Internet-Draft lwig-curve-representations March 2020
the isogeny has low degree l). Note, however, that this does require
storage of the polynomial coefficients of the isogeny and dual
isogeny involved. This illustrates that low-degree isogenies are to
be preferred, since an l-isogeny (usually) requires storing roughly
6*l elements of GF(q). While there are many isogenies, we therefore
only consider those with the desired property with lowest possible
degree.
Appendix G. Further Cousins of Curve25519
This section introduces some further curves related to Curve25519 and
explains their relationships.
G.1. Further Alternative Representations
The Weierstrass curve Wei25519 is isomorphic to the Weierstrass curve
Wei25519.2 defined over GF(p), with as base point the pair (G2X,G2Y),
and isogenous to the Weierstrass curve Wei25519.-3 defined over
GF(p), with as base point the pair (G3X, G3Y), where parameters are
as specified in Appendix G.3 and where the related mappings are as
specified in Appendix G.2.
G.2. Further Switching
Each affine point (X, Y) of Wei25519 corresponds to the point (X',
Y'):=(X*s^2,Y*s^3) of Wei25519.2, where s is the element of GF(p)
defined by
s 20343593038935618591794247374137143598394058341193943326473831977
39407761440
(=0x047f6814 6d568b44 7e4552ea a5ed633d 02d62964 a2b0a120
5e7941e9 375de020),
while the point at infinity of Wei25519 corresponds to the point at
infinity of Wei25519.2. (Here, we used the mapping of Appendix F.3.)
Under this mapping, the base point (GX, GY) of Wei25519 corresponds
to the base point (G2X,G2Y) of Wei25519.2. The inverse mapping maps
the affine point (X', Y') of Wei25519.2 to (X,Y):=(X'/s^2,Y'/s^3) of
Wei25519, while mapping the point at infinity O of Wei25519.2 to the
point at infinity O of Wei25519. Note that this mapping (and its
inverse) involves a modular multiplication of both coordinates with
fixed constants s^2 and s^3 (respectively, 1/s^2 and 1/s^3), which
can be precomputed.
Each affine point (X,Y) of Wei25519 corresponds to the point
(X',Y'):=(X1*t^2,Y1*t^3) of Wei25519.-3, where
(X1,Y1)=(u(X)/w(X)^2,Y*v(X)/w(X)^3), where u, v, and w are the
Struik Expires September 10, 2020 [Page 39]
Internet-Draft lwig-curve-representations March 2020
polynomials with coefficients in GF(p) as defined in Appendix G.4.1
and where t is the element of GF(p) defined by
t 35728133398289175649586938605660542688691615699169662967154525084
644181596229
(=0x4efd6829 88ff8526 e189f712 5999550c e9ef729b ed1a7015
73b1bab8 8bfcd845),
while the point at infinity of Wei25519 corresponds to the point at
infinity of Wei25519.-3. (Here, we used the isogenous mapping of
Appendix F.4.) Under this isogenous mapping, the base point (GX,GY)
of Wei25519 corresponds to the base point (G3X,G3Y) of Wei25519.-3.
The dual isogeny maps the affine point (X',Y') of Wei25519.-3 to the
affine point (X,Y):=(u'(X1)/w'(X1)^2,Y1*v'(X1)/w'(X1)^3) of Wei25519,
where (X1,Y1)=(X'/t^2,Y'/t^3) and where u', v', and w' are the
polynomials with coefficients in GF(p) as defined in Appendix G.4.2,
while mapping the point at infinity O of Wei25519.-3 to the point at
infinity O of Wei25519. Under this dual isogenous mapping, the base
point (G3X, G3Y) of Wei25519.-3 corresponds to a multiple of the base
point (GX, GY) of Wei25519, where this multiple is l=47 (the degree
of the isogeny; see the description in Appendix F.4). Note that this
isogenous map (and its dual) primarily involves the evaluation of
three fixed polynomials involving the x-coordinate, which takes
roughly 140 modular multiplications (or less than 5-10% relative
incremental cost compared to the cost of an elliptic curve scalar
multiplication).
G.3. Further Domain Parameters
The parameters of the Weierstrass curve with a=2 that is isomorphic
with Wei25519 and the parameters of the Weierstrass curve with a=-3
that is isogenous with Wei25519 are as indicated below. Both domain
parameter sets can be exploited directly to derive more efficient
point addition formulae, should an implementation facilitate this.
General parameters: same as for Wei25519 (see Appendix E.3)
Weierstrass curve-specific parameters (for Wei25519.2, i.e., with
a=2):
a 2 (=0x02)
b 12102640281269758552371076649779977768474709596484288167752775713
178787220689
(=0x1ac1da05 b55bc146 33bd39e4 7f94302e f19843dc f669916f
6a5dfd01 65538cd1)
Struik Expires September 10, 2020 [Page 40]
Internet-Draft lwig-curve-representations March 2020
G2X 10770553138368400518417020196796161136792368198326337823149502681
097436401658
(=0x17cfeac3 78aed661 318e8634 582275b6 d9ad4def 072ea193
5ee3c4e8 7a940ffa)
G2Y 54430575861508405653098668984457528616807103332502577521161439773
88639873869
(=0x0c08a952 c55dfad6 2c4f13f1 a8f68dca dc5c331d 297a37b6
f0d7fdcc 51e16b4d)
Weierstrass curve-specific parameters (for Wei25519.-3, i.e., with
a=-3):
a -3
(=0x7fffffff ffffffff ffffffff ffffffff ffffffff ffffffff
ffffffff ffffffea)
b 29689592517550930188872794512874050362622433571298029721775200646
451501277098
(=0x41a3b6bf c668778e be2954a4 b1df36d1 485ecef1 ea614295
796e1022 40891faa)
G3X 53837179229940872434942723257480777370451127212339198133697207846
219400243292
(=0x7706c37b 5a84128a 3884a5d7 1811f1b5 5da3230f fb17a8ab
0b32e48d 31a6685c)
G3Y 69548073091100184414402055529279970392514867422855141773070804184
60388229929
(=0x0f60480c 7a5c0e11 40340adc 79d6a2bf 0cb57ad0 49d025dc
38d80c77 985f0329)
G.4. Isogeny Details
The isogeny and dual isogeny are both isogenies with degree l=47.
Both are specified by a triple of polynomials u, v, and w (resp. u',
v', and w') of degree 47, 69, and 23, respectively, with coefficients
in GF(p). The coeffients of each of these polynomials are specified
in Appendix G.4.1 (for the isogeny) and in Appendix G.4.2 (for the
dual isogeny). For each polynomial in variable x, the coefficients
are tabulated as sequence of coefficients of x^0, x^1, x^2, ..., in
hexadecimal format.
Struik Expires September 10, 2020 [Page 41]
Internet-Draft lwig-curve-representations March 2020
G.4.1. Isogeny Parameters
G.4.1.1. Coefficients of u(x)
0 0x670ed14828b6f1791ceb3a9cc0edfe127dee8729c5a72ddf77bb1abaebbba1e8
1 0x1135ca8bd5383cb3545402c8bce2ced14b45c29b241e4751b035f27524a9f932
2 0x3223806ff5f669c430efd74df8389f058d180e2fcffa5cdef3eacecdd2c34771
3 0x31b8fecf3f17a819c228517f6cd9814466c8c8bea2efccc47a29bfc14c364266
4 0x2541305c958c5a326f44efad2bec284e7abee840fadb08f2d994cd382fd8ce42
5 0x6e6f9c5792f3ff497f860f44a9c469cec42bd711526b733e10915be5b2dbd8c6
6 0x3e9ad2e5f594b9ce6b06d4565891d28a1be8790000b396ef0bf59215d6cabfde
7 0x278448895d236403bbc161347d19c913e7df5f372732a823ed807ee1d30206be
8 0x42f9d171ea8dc2f4a14ea46cc0ee54967175ecfe83a975137b753cb127c35060
9 0x128e40efa2d3ccb51567e73bae91e7c31eac45700fa13ce5781cbe5ddc985648
10 0x450e5086c065430b496d88952dd2d5f2c5102bc27074d4d1e98bfa47413e0645
11 0x487ef93da70dfd44a4db8cb41542e33d1aa32237bdca3a59b3ce1c59585f253d
12 0x33d209270026b1d2db96efb36cc2fa0a49be1307f49689022eab1892b010b785
13 0x4732b5996a20ebc4d5c5e2375d3b6c4b700c681bd9904343a14a0555ef0ecd48
14 0x64dc9e8272b9f5c6ad3470db543238386f42b18cb1c592cc6caf7893141b2107
15 0x52bbacd1f85c61ef7eafd8da27260fa2821f7a961867ed449b283036508ac5c5
16 0x320447ed91210985e2c401cfe1a93db1379424cf748f92fd61ab5cc356bc89a2
17 0x23d23a49bbcdf8cf4c4ce8a4ff7dd87d1ad1970317686254d5b4d2ec050d019f
18 0x1601fca063f0bbbf15f198b3c20e474c2170294fa981f73365732d2372b40cd4
19 0x7bf3f93840035e9688cfff402cee204a17c0de9779fc33503537dd78021bf4c4
20 0x311998ce59fb7e1cd6af591ece3e84dfcb1c330cbcf28c0349e37b9581452853
21 0x7ae5e41acfd28a9add2216dfed34756575a19b16984c1f3847b694326dad7f99
Struik Expires September 10, 2020 [Page 42]
Internet-Draft lwig-curve-representations March 2020
22 0x704957e279244a5b107a6c57bd0ab9afe5227b7c0be2052cd3513772a40efee7
23 0x56b918b5a0c583cb763550f8f71481e57c13bdcef2e5cfc8091d0821266f233b
24 0x677073fed43ab291e496f798fbcf217bac3f014e35d0c2fa07f041ae746a04d7
25 0x22225388e76f9688c7d4053b50ba41d0d8b71a2f21da8353d98472243ef50170
26 0x66930b3dffdd3995a2502cef790d78b091c875192d8074bb5d5639f736400555
27 0x79eb677c5e36971e8d64d56ebc0dedb4e9b7dd2d7b01343ebbd4d358d376e490
28 0x48a204c2ca6d8636e9994842605bd648b91b637844e38d6c7dd707edce8256e2
29 0x0fb3529b0d4b9ce2d70760f33e8ce997a58999718e9277caf48623d27ae6a788
30 0x4352604bffd0c7d7a9ed898a2c6e7cf2512ffb89407271ba1f2c2d0ead8cc5aa
31 0x6667697b29785fb6f0bd5e04d828991a5fe525370216f347ec767a26e7aac936
32 0x09fc950b083c56dbd989badf9887255e203c879f123a7cb28901e50aea6d64dc
33 0x41e51b51b5caadd1c15436bbf37596a1d7288a5f495d6b5b1ae66f8b2942b31d
34 0x073b59fec709aa1cabd429e981c6284822a8b7b07620c831ab41fd31d5cf7430
35 0x67e9b88e9a1bfbc2554107d67d814986f1b09c3107a060cba21c019a2d5dc848
36 0x6881494a1066ca176c5e174713786040affb4268b19d2abf28ef4293429f89c1
37 0x5f4d30502ff1e1ccd624e6f506569454ab771869d7483e26afc09dea0c5ccd3d
38 0x02a814cfc5859bca51e539c159955cbe729a58978b52329575d09bc6c3bf97ad
39 0x1313c8aaae20d6f4397f0d8b19e52cfcdf8d8e10fba144aec1778fd10ddf4e9c
40 0x7008d38f434b98953a996d4cc79fcbef9502411dcdf92005f725cea7ce82ad47
41 0x5a74d1296aaaa245ffb848f434531fa3ba9e5cb9098a7091d36c2777d4cf5a13
42 0x4bd3b700606397083f8038177bdaa1ac6edbba0447537582723cae0fd29341a9
43 0x573453fb2b093016f3368356c786519d54ed05f5372c01723b4da520597ec217
44 0x77f5c605bdb3a30d7d9c8840fce38650910d4418eed707a212c8927f41c2c812
45 0x16d6b9f7ff57ca32350057de1204cc6d69d4ef1b255dfef8080118e2fef6ace3
Struik Expires September 10, 2020 [Page 43]
Internet-Draft lwig-curve-representations March 2020
46 0x34e8595832a4021f8b5744014c6b4f7da7df0d0329e8b6b4d44c8fadad6513b7
47 0x01
G.4.1.2. Coefficients of v(x)
0 0x0f9f5eb7134e6f8dafa30c45afa58d7bfc6d4e3ccbb5de87b562fd77403972b2
1 0x36c2dcd9e88f0d2d517a15fc453a098bbbb5a05eb6e8da906fae418a4e1a13f7
2 0x0b40078302c24fa394a834880d5bf46732ca1b4894172fb7f775821276f558b3
3 0x53dd8e2234573f7f3f7df11e90a7bdd7b75d807f9712f521d4fb18af59aa5f26
4 0x6d4d7bb08de9061988a8cf6ff3beb10e933d4d2fbb8872d256a38c74c8c2ceda
5 0x71bfe5831b30e28cd0fbe1e9916ab2291c6beacc5af08e2c9165c632e61dd2f5
6 0x7c524f4d17ff2ee88463da012fc12a5b67d7fb5bd0ab59f4bbf162d76be1c89c
7 0x758183d5e07878d3364e3fd4c863a5dc1fe723f48c4ab4273fc034f5454d59a4
8 0x1eb41ef2479444ecdccbc200f64bde53f434a02b6c3f485d32f14da6aa7700e1
9 0x1490f3851f016cc3cf8a1e3c16a53317253d232ed425297531b560d70770315c
10 0x09bc43131964e46d905c3489c9d465c3abbd26eab9371c10e429b36d4b86469c
11 0x5f27c173d94c7a413a288348d3fc88daa0bcf5af8f436a47262050f240e9be3b
12 0x1d20010ec741aaa393cd19f0133b35f067adab0d105babe75fe45c8ba2732ceb
13 0x01b3c669ae49b86be2f0c946a9ff6c48e44740d7d9804146915747c3c025996a
14 0x24c6090f79ec13e3ae454d8f0f98e0c30a8938180595f79602f2ba013b3c10db
15 0x4650c5b5648c6c43ac75a2042048c699e44437929268661726e7182a31b1532f
16 0x0957a835fb8bac3360b5008790e4c1f3389589ba74c8e8bf648b856ba7f22ba5
17 0x1cd1300bc534880f95c7885d8df04a82bd54ed3e904b0749e0e3f8cb3240c7c7
18 0x760b486e0d3c6ee0833b34b64b7ebc846055d4d1e0beeb6aedd5132399ada0ea
19 0x1c666846c63965ef7edf519d6ada738f2b676ae38ff1f4621533373931b3220e
20 0x365055118b38d4bc0df86648044affea2ef33e9a392ad336444e7d15e45585d1
Struik Expires September 10, 2020 [Page 44]
Internet-Draft lwig-curve-representations March 2020
21 0x736487bde4b555abfccd3ea7ddcda98eda0d7c879664117dee906a88bc551194
22 0x70de05ab9520222a37c7a84c61eedff71cb50c5f6647fc2a5d6e0ff2305cea37
23 0x59053f6cdf6517ab3fe4bd9c9271d1892f8cf353d8041b98409e1e341a01f8b5
24 0x375db54ed12fe8df9a198ea40200e812c2660b7022681d7932d89fafe7c6e88d
25 0x2a070c31d1c1a064daf56c79a044bd1cd6d13f1ddb0ff039b03a6469aaa9ed77
26 0x41482351e7f69a756a5a2c0b3fa0681c03c550341d0ca0f76c5b394db9d2de8d
27 0x747ac1109c9e9368d94a302cb5a1d23fcc7f0fd8a574efb7ddcaa738297c407a
28 0x45682f1f2aab6358247e364834e2181ad0448bb815c587675fb2fee5a2119064
29 0x148c5bf44870dfd307317f0a0e4a8c163940bee1d2f01455a2e658aa92c13620
30 0x6add1361e56ffa2d2fbbddba284b35be5845aec8069fc28af009d53290a705ce
31 0x6631614c617400dc00f2c55357f67a94268e7b5369b02e55d5db46c935be3af5
32 0x17cffb496c64bb89d91c8c082f4c288c3c87feabd6b08591fe5a92216c094637
33 0x648ff88155969f54c955a1834ad227b93062bb191170dd8c4d759f79ad5da250
34 0x73e50900b89e5f295052b97f9d0c9edb0fc7d97b7fa5e3cfeefe33dd6a9cb223
35 0x6afcb2f2ffe6c08508477aa4956cbd3dc864257f5059685adf2c68d4f2338f00
36 0x372fd49701954c1b8f00926a8cb4b157d4165b75d53fa0476716554bf101b74c
37 0x0334ed41325f3724ff8becbf2b3443fea6d30fa543d1ca13188aceb2bdaf5f4e
38 0x70e629c95a94e8e1b3974acb25e18ba42f8d5991786f0931f650c283adfe82fd
39 0x738a625f4c62d3d645f1274e09ab344e72d441f3c0e82989d3e21e19212f23f3
40 0x7093737294b29f21522f5664a9941c9b476f75d443b647bd2c777040bcd12a6a
41 0x0a996bad5863d821ccb8b89fa329ddbe5317a46bcb32552db396bea933765436
42 0x2da237e3741b75dd0264836e7ef634fc0bc36ab187ebc790591a77c257b06f53
43 0x1902f3daa86fa4f430b57212924fdc9e40f09e809f3991a0b3a10ab186c50ee5
44 0x12baffec1bf20c921afd3cdf67a7f1d87c00d5326a3e5c83841593c214dadcb1
Struik Expires September 10, 2020 [Page 45]
Internet-Draft lwig-curve-representations March 2020
45 0x6460f5a68123cb9e7bc1289cd5023c0c9ccd2d98eea24484fb3825b59dcd09aa
46 0x2c7d63a868ffc9f0fd034f821d84736c5bc33325ce98aba5f0d95fef6f230ec8
47 0x756e0063349a702db7406984c285a9b6bfba48177950d4361d8efa77408dc860
48 0x037f3e30032b21e0279738e0a2b689625447831a2ccf15c638672da9aa7255ae
49 0x1107c0dbe15d6ca9e790768317a40bcf23c80f1841f03ca79dd3e3ef4ea1ae30
50 0x61ff7f25721d6206041c59a788316b09e05135a2aad94d539c65daa68b302cc2
51 0x5dbfe346cbd0d61b9a3b5c42ec0518d3ae81cabcc32245060d7b0cd982b8d071
52 0x4b6595e8501e9ec3e75f46107d2fd76511764efca179f69196eb45c0aa6fade3
53 0x72d17a5aa7bd8a2540aa9b02d9605f2a714f44abfb4c35d518b7abc39b477870
54 0x658d8c134bac37729ec40d27d50b637201abbf1ab4157316358953548c49cf22
55 0x36ac53b9118581ace574d5a08f9647e6a916f92dda684a4dbc405e2646b0243f
56 0x1917a98f387d1e323e84a0f02d53307b1dd949e1a27b0de14514f89d9c0ef4b6
57 0x21573434fde7ce56e8777c79539479441942dba535ade8ecb77763f7eb05d797
58 0x0e0bf482dc40884719bea5503422b603f3a8edb582f52838caa6eaab6eeac7ef
59 0x3b0471eb53bd83e14fbc13928fe1691820349a963be8f7e9815848a53d03f5eb
60 0x1e92cb067b24a729c42d3abb7a1179c577970f0ab3e6b0ce8d66c5b8f7001262
61 0x74ea885c1ebed6f74964262402432ef184c42884fceb2f8dba3a9d67a1344dd7
62 0x433ebce2ce9b0dc314425cfc2b234614d3c34f2c9da9fff4fdddd1ce242d035b
63 0x33ac69e6be858dde7b83a9ff6f11de443128b39cec6e410e8d3b570e405ff896
64 0x0dab71e2ae94e6530a501ed8cf3df26731dd1d41cd81578341e12dca3cb71aa3
65 0x537f58d52d18ce5b1d5a6bd3a420e796e64173491ad43dd4d1083a7dcc7dd201
66 0x49c2f6afa93fdcc4e0f8128a8b06da4c75049be14edf3e103821ab604c60f8ae
67 0x10a333eabd6135aeaa3f5f5f7e73d102e4fd7e4bf0902fc55b00da235fa1ad08
68 0x0f5c86044bf6032f5102e601f2a0f73c7bce9384bedd120f3e72d78484179d9c
Struik Expires September 10, 2020 [Page 46]
Internet-Draft lwig-curve-representations March 2020
69 0x01
G.4.1.3. Coefficients of w(x)
0 0x3da24d42421264f30939ff00203880f2b017eb3fecf8933ae61e18df8c8ba116
1 0x0457f20bc393cdc9a66848ce174e2fa41d77e6dbae05a317a1fb6e3ae78760f8
2 0x7f608a2285c480d5c9592c435431fae94695beef79d770bb6d029c1d10a53295
3 0x3832accc520a485100a0a1695792465142a5572bed1b2e50e1f8f662ac7289bb
4 0x2df1b0559e31b328eb34beedd5e537c3f4d7b9befb0749f75d6d0d866d26fbaa
5 0x25396820381d04015a9f655ddd41c74303ded05d54a7750e2f58006659adda28
6 0x6fa070a70ca2bc6d4d0795fb28d4990b2cc80cd72d48b603a8ac8c8268bef6a6
7 0x27f488578357388b20fbc7503328e1d10de602b082b3c7b8ceb33c29fea7a0d2
8 0x15776851a7cabcfe84c632118306915c0c15c75068a47021968c7438d46076e6
9 0x101565b08a9af015c172fb194b940a4df25c4fb1d85f72d153efc79131d45e8f
10 0x196b0ffbf92f3229fea1dac0d74591b905ccaab6b83f905ee813ee8449f8a62c
11 0x01f55784691719f765f04ee9051ec95d5deb42ae45405a9d87833855a6d95a94
12 0x628858f79cca86305739d084d365d5a9e56e51a4485d253ae3f2e4a379fa8aff
13 0x4a842dcd943a80d1e6e1dab3622a8c4d390da1592d1e56d1c14c4d3f72dd01a5
14 0x0f3bfc9cb17a1125f94766a4097d0f1018963bc11cb7bc0c7a1d94d65e282477
15 0x1c4bd70488c4882846500691fa7543b7ef694446d9c3e3b4707ea2c99383e53c
16 0x2d7017e47b24b89b0528932c4ade43f09091b91db0072e6ebdc5e777cb215e35
17 0x781d69243b6c86f59416f91f7decaca93eab9cdc36a184191810c56ed85e0fdc
18 0x5f20526f4177357da40a18da054731d442ad2a5a4727322ba8ed10d32eca24fb
19 0x33e4cab64ed8a00d8012104fe8f928e6173c428eff95bbbe569ea46126a4f3cd
20 0x050555b6f07e308d33776922b6566829d122e19b25b7bbacbb0a4b1a7dc40192
21 0x533fa4bf1e2a2aae2f979065fdbb5b667ede2f85543fddbba146aa3a4ef2d281
Struik Expires September 10, 2020 [Page 47]
Internet-Draft lwig-curve-representations March 2020
22 0x5a742cac1952010fc5aba200a635a7bed3ef868194f45b5a6a2647d6d6b289d2
23 0x01
G.4.2. Dual Isogeny Parameters
G.4.2.1. Coefficients of u'(x)
0 0x0f0eddb584a20aaac8f1419efdd02a5cca77b21e4cfae78c49b5127d98bc5882
1 0x7115e60d44a58630417df33dd45b8a546fa00b79fea3b2bdc449694bade87c0a
2 0x0b3f3a6f3c445c7dc1f91121275414e88c32ff3f367ba0edad4d75b7e7b94b65
3 0x1eb31bb333d7048b87f2b3d4ec76d69035927b41c30274368649c87c52e1ab30
4 0x552c886c2044153e280832264066cce2a7da1127dc9720e2a380e9d37049ac64
5 0x4504f27908db2e1f5840b74ae42445298755d9493141f5417c02f04d47797dda
6 0x082c242cce1eb19698a4fa30b5affe64e5051c04ae8b52cb68d89ee85222e628
7 0x480473406add76cf1d77661b3ff506c038d9cdd5ad6e1ea41969430bb876d223
8 0x25f47bb506fba80c79d1763365fa9076d4c4cb6644f73ed37918074397e88588
9 0x10f13ed36eab593fa20817f6bb70cac292e18d300498f6642e35cbdf772f0855
10 0x7d28329d695fb3305620f83a58df1531e89a43c7b3151d16f3b60a8246c36ade
11 0x02c5ec8c42b16dc6409bdd2c7b4ffe9d65d7209e886badbd5f865dec35e4ab4a
12 0x7f4f33cd50255537e6cde15a4a327a5790c37e081802654b56c956434354e133
13 0x7d30431a121d9240c761998cf83d228237e80c3ef5c7191ec9617208e0ab8cec
14 0x4d2a7d6609610c1deed56425a4615b92f70a507e1079b2681d96a2b874cf0630
15 0x74676df60a9906901d1dc316c639ff6ae0fcdb02b5571d4b83fc2eedcd2936a8
16 0x22f8212219aca01410f06eb234ed53bd5b8fbe7c08652b8002bcd1ea3cdae387
17 0x7edb04449565d7c566b934a87fadade5515f23bda1ce25daa19fff0c6a5ccc2f
18 0x106ef71aa3aa34e8ecf4c07a67d03f0949d7d015ef2c1e32eb698dd3bec5a18c
19 0x0017913eb705db126ac3172447bcd811a62744d505ad0eea94cfcfdde5ca7428
Struik Expires September 10, 2020 [Page 48]
Internet-Draft lwig-curve-representations March 2020
20 0x2cc793e6d3b592dcf5472057a991ff1a5ab43b4680bb34c0f5faffc5307827c1
21 0x6dafcc0b16f98300cddb5e0a7d7ff04a0e73ca558c54461781d5a5ccb1ea0122
22 0x7e418891cf222c021b0ae5f5232b9c0dc8270d4925a13174a0f0ac5e7a4c8045
23 0x76553bd26fecb019ead31142684789fea7754c2dc9ab9197c623f45d60749058
24 0x693efb3f81086043656d81840902b6f3a9a4b0e8f2a5a5edf5ce1c7f50a3898e
25 0x46c630eac2b86d36f18a061882b756917718a359f44752a5caf41be506788921
26 0x01dcfa01773628753bc6f448ac11be8a3bffa0011b9284967629b827e064f614
27 0x08430b5b97d49b0938d1f66ecb9d2043025c6eec624f8f02042b9621b2b5cb19
28 0x66f66a6669272d47d3ec1efea36ee01d4a54ed50e9ec84475f668a5a9850f9be
29 0x539128823b5ef3e87e901ab22f06d518a9bad15f5d375b49fe1e893ab38b1345
30 0x2bd01c49d6fff22c213a8688924c10bf29269388a69a08d7f326695b3c213931
31 0x3f7bea1baeccea3980201dc40d67c26db0e3b15b5a19b6cdac6de477aa717ac1
32 0x6e0a72d94867807f7150fcb1233062f911b46e2ad11a3eac3c6c4c91e0f4a3fa
33 0x5963f3cc262253f56fc103e50217e7e5b823ae8e1617f9e11f4c9c595fbb5bf6
34 0x41440b6fe787777bc7b63afac9f4a38ddadcebc3d72f8fc73835247ba05f3a1d
35 0x66d185401c1d2d0b84fcf6758a6a985bf9695651271c08f4b69ce89175fb7b34
36 0x2673fb8c65bc4fe41905381093429a2601c46a309c03077ca229bac7d6ccf239
37 0x1ce4d895ee601918a080de353633c82b75a3f61e8247763767d146554dd2f862
38 0x18efa6c72fa908347547a89028a44f79f22542baa588601f2b3ed25a5e56d27c
39 0x53de362e2f8ff220f8921620a71e8faa1aa57f8886fcbb6808fa3a5560570543
40 0x0dc29a73b97f08aa8774911474e651130ed364e8d8cffd4a80dee633aacecc47
41 0x4e7eb8584ae4de525389d1e9300fc4480b3d9c8a5a45ecfbe33311029d8f6b99
42 0x6c3cba4aa9229550fa82e1cfaee4b02f2c0cb86f79e0d412b8e32b00b7959d80
43 0x5a9d104ae585b94af68eeb16b1349776b601f97b7ce716701645b1a75b68dcf3
Struik Expires September 10, 2020 [Page 49]
Internet-Draft lwig-curve-representations March 2020
44 0x754e014b5e87af035b3d5fe6fb49f4631e32549f6341c6693c5172a6388e273e
45 0x6710d8265118e22eaceba09566c86f642ab42da58c435083a353eaa12d866c39
46 0x6e88ac659ce146c369f8b24c3a49f8dca547827250cf7963a455851cfc4f8d22
47 0x0971eb5f253356cd1fde9fb21f4a4902aa5b8d804a2b57ba775dc130181ae2e8
G.4.2.2. Coefficients of v'(x)
0 0x043c9b67cc5b16e167b55f190db61e44d48d813a7112910f10e3fd8da85d61d3
1 0x72046db07e0e7882ff3f0f38b54b45ca84153be47a7fd1dd8f6402e17c47966f
2 0x1593d97b65a070b6b3f879fe3dc4d1ef03c0e781c997111d5c1748f956f1ffc0
3 0x54e5fec076b8779338432bdc5a449e36823a0a7c905fd37f232330b026a143a0
4 0x46328dd9bc336e0873abd453db472468393333fbf2010c6ac283933216e98038
5 0x25d0c64de1dfe1c6d5f5f2d98ab637d8b39bcf0d886a23dabac18c80d7eb03ce
6 0x3a175c46b2cd8e2b313dde2d5f3097b78114a6295f283cf58a33844b0c8d8b34
7 0x5cf4e6f745bdd61181a7d1b4db31dc4c30c84957f63cdf163bee5e466a7a8d38
8 0x639071c39b723eea51cfd870478331d60396b31f39a593ebdd9b1eb543875283
9 0x7ea8f895dcd85fc6cb2b58793789bd9246e62fa7a8c7116936876f4d8dff869b
10 0x503818acb535bcaacf8ad44a83c213a9ce83af7c937dc9b3e5b6efedc0a7428c
11 0x0e815373920ec3cbf3f8cae20d4389d367dc4398e01691244af90edc3e6d42b8
12 0x7e4b23e1e0b739087f77910cc635a92a3dc184a791400cbceae056c19c853815
13 0x145322201db4b5ec0a643229e07c0ab7c36e4274745689be2c19cfa8a702129d
14 0x0fde79514935d9b40f52e33429621a200acc092f6e5dec14b49e73f2f59c780d
15 0x37517ac5c04dc48145a9d6e14803b8ce9cb6a5d01c6f0ad1b04ff3353d02d815
16 0x58ae96b8eefe9e80f24d3b886932fe3c27aaea810fa189c702f93987c8c97854
17 0x6f6402c90fa379096d5f436035bebc9d29302126e9b117887abfa7d4b3c5709a
18 0x01dbdf2b9ec09a8defeb485cc16ea98d0d45c5b9877ff16bd04c0110d2f64961
Struik Expires September 10, 2020 [Page 50]
Internet-Draft lwig-curve-representations March 2020
19 0x53c51706af523ab5b32291de6c6b1ee7c5cbd0a5b317218f917b12ff38421452
20 0x1b1051c7aec7d37a349208e3950b679d14e39f979db4fcd7b50d7d27dc918650
21 0x1547e8d36262d5434cfb029cdd29385353124c3c35b1423c6cca1f87910b305b
22 0x198efe984efc817835e28f704d41e4583a1e2398f7ce14045c4575d0445c6ce7
23 0x492276dfe9588ee5cd9f553d990f377935d721822ecd0333ce2eb1d4324d539c
24 0x77bad5319bacd5ed99e1905ce2ae89294efa7ee1f74314e4095c618a4e580c9b
25 0x2cb3d532b8eac41c61b683f7b02feb9c2761f8b4286a54c3c4b60dd8081a312e
26 0x37d189ea60443e2fee9b7ba8a34ed79ff3883dcefc06592836d2a9dd2ee3656e
27 0x79a80f9a0e6b8ded17a3d6ccf71eb565e3704c3543b77d70bca854345e880aba
28 0x47718530ef8e8c75f069acb2d9925c5537908e220b28c8a2859b856f46d5f8db
29 0x7dc518f82b55a36b4fa084b05bf21e3efce481d278a9f5c6a49701e56dac01ec
30 0x340a318dad4b8d348a0838659672792a0f00b7105881e6080a340f708a9c7f94
31 0x55f04d9d8891636d4e9c808a1fa95ad0dae7a8492257b20448023aad3203278e
32 0x39dc465d58259f9f70bb430d27e2f0ab384a550e1259655443e14bdecba85530
33 0x757385464cff265379a1adfadfd6f6a03fa8a2278761d4889ab097eff4d1ac28
34 0x4d575654dbe39778857f4e688cc657416ce524d54864ebe8995ba766efa7ca2b
35 0x47adb6aecc1949f2dc9f01206cc23eb4a0c29585d475dd24dc463c5087809298
36 0x30d39e8b0c451a8fcf3d2abab4b86ffa374265abbe77c5903db4c1be8cec7672
37 0x28cf47b39112297f0daeaa621f8e777875adc26f35dec0ba475c2ee148562b41
38 0x36199723cc59867e2e309fe9941cd33722c807bb2d0a06eeb41de93f1b93f2f5
39 0x5cdeb1f2ee1c7d694bdd884cb1c5c22de206684e1cafb8d3adb9a33cb85e19a2
40 0x0f6e6b3fc54c2d25871011b1499bb0ef015c6d0da802ae7eccf1d8c3fb73856c
41 0x0c1422c98b672414344a9c05492b926f473f05033b9f85b8788b4bb9a080053c
42 0x19a8527de35d4faacb00184e0423962247319703a815eecf355f143c2c18f17f
Struik Expires September 10, 2020 [Page 51]
Internet-Draft lwig-curve-representations March 2020
43 0x7812dc3313e6cf093da4617f06062e8e8969d648dfe6b5c331bccd58eb428383
44 0x61e537180c84c79e1fd2d4f9d386e1c4f0442247605b8d8904d122ee7ef9f7be
45 0x544d8621d05540576cfc9b58a3dab19145332b88eb0b86f4c15567c37205adf9
46 0x11be3ef96e6e07556356b51e2479436d9966b7b083892b390caec22a117aa48e
47 0x205cda31289cf75ab0759c14c43cb30f7287969ea3dc0d5286a3853a4d403187
48 0x048d8fc6934f4f0a99f0f2cc59010389e2a0b20d6909bfcf8d7d0249f360acdc
49 0x42cecc6d9bdca6d382e97fcea46a79c3eda2853091a8f399a2252115bf9a1454
50 0x0117d41b24f2f69cb3270b359c181607931f62c56d070bbd14dc9e3f9ab1432e
51 0x7c51564c66f68e2ad4ce6ea0d68f920fafa375376709c606c88a0ed44207aa1e
52 0x48f25191fc8ac7d9f21adf6df23b76ccbca9cb02b815acdbebfa3f4eddc71b34
53 0x4fc21a62c4688de70e28ad3d5956633fc9833bc7be09dc7bc500b7fae1e1c9a8
54 0x1f23f25be0912173c3ef98e1c9990205a69d0bf2303d201d27a5499247f06789
55 0x3131495618a0ac4cb11a702f3f8bab66c4fa1066d0a741af3c92d5c246edd579
56 0x0d93fe40faa53913638e497328a1b47603cb062c7afc9e96278603f29fd11fd4
57 0x6b348bc59e984c91d696d1e3c3cfae44021f06f74798c787c355437fb696093d
58 0x65af00e73043edcb479620c8b48098b89809d577a4071c8e33e8678829138b8a
59 0x5e62ffb032b2ddb06591f86a46a18effd5d6ecf3f129bb2bacfd51a3739a98b6
60 0x62c974ef3593fc86f7d78883b8727a2f7359a282cbc0196948e7a793e60ce1a1
61 0x204d708e3f500aad64283f753e7d9bab976aa42a4ca1ce5e9d2264639e8b1110
62 0x0a90f0059da81a012e9d0a756809fab2ce61cb45965d4d1513a06227783ee4ea
63 0x39fa55971c9e833f61139c39e243d40869fd7e8a1417ee4e7719dd2dd242766f
64 0x22677c1e659caa324f0c74a013921facf62d0d78f273563145cc1ddccfcc4421
65 0x3468cf6df7e93f7ff1fe1dd7e180a89dec3ed4f72843b4ea8a8d780011a245b2
66 0x68f75a0e2210f52a90704ed5f511918d1f6bcfcd26b462cc4975252369db6e9d
Struik Expires September 10, 2020 [Page 52]
Internet-Draft lwig-curve-representations March 2020
67 0x6220c0699696e9bcab0fe3a80d437519bd2bdf3caef665e106b2dd47585ddd9f
68 0x553ad47b129fb347992b576479b0a89f8d71f1196f83e5eaab5f533a1dd6f6d7
69 0x239aef387e116ec8730fa15af053485ca707650d9f8917a75f22acf6213197df
G.4.2.3. Coefficients of w'(x)
0 0x6bd7f1fc5dd51b7d832848c180f019bcbdb101d4b3435230a79cc4f95c35e15e
1 0x17413bb3ee505184a504e14419b8d7c8517a0d268f65b0d7f5b0ba68d6166dd0
2 0x47f4471beed06e5e2b6d5569c20e30346bdba2921d9676603c58e55431572f90
3 0x2af7eaafd04f6910a5b01cdb0c27dca09487f1cd1116b38db34563e7b0b414eb
4 0x57f0a593459732eef11d2e2f7085bf9adf534879ba56f7afd17c4a40d3d3477b
5 0x4da04e912f145c8d1e5957e0a9e44cca83e74345b38583b70840bdfdbd0288ed
6 0x7cc9c3a51a3767d9d37c6652c349adc09bfe477d99f249a2a7bc803c1c5f39ed
7 0x425d7e58b8adf87eebf445b424ba308ee7880228921651995a7eab548180ad49
8 0x48156db5c99248234c09f43fedf509005943d3d5f5d7422621617467b06d314f
9 0x0d837dbbd1af32d04e2699cb026399c1928472aa1a7f0a1d3afd24bc9923456a
10 0x5b8806e0f924e67c1f207464a9d025758c078b43ddc0ea9afe9993641e5650be
11 0x29c91284e5d14939a6c9bc848908bd9df1f8346c259bbd40f3ed65182f3a2f39
12 0x25550b0f3bceef18a6bf4a46c45bf1b92f22a76d456bfdf19d07398c80b0f946
13 0x495d289b1db16229d7d4630cb65d52500256547401f121a9b09fb8e82cf01953
14 0x718c8c610ea7048a370eabfd9888c633ee31dd70f8bcc58361962bb08619963e
15 0x55d8a5ceef588ab52a07fa6047d6045550a5c52c91cc8b6b82eeb033c8ca557d
16 0x620b5a4974cc3395f96b2a0fa9e6454202ef2c00d82b0e6c534b3b1d20f9a572
17 0x4991b763929b00241a1a9a68e00e90c5df087f90b3352c0f4d8094a51429524e
18 0x18b6b49c5650fb82e36e25fd4eb6decfdd40b46c37425e6597c7444a1b6afb4e
19 0x6868305b4f40654460aad63af3cb9151ab67c775eaac5e5df90d3aea58dee141
Struik Expires September 10, 2020 [Page 53]
Internet-Draft lwig-curve-representations March 2020
20 0x16bc90219a36063a22889db810730a8b719c267d538cd28fa7c0d04f124c8580
21 0x3628f9cf1fbe3eb559854e3b1c06a4cd6a26906b4e2d2e70616a493bba2dc574
22 0x64abcc6759f1ce1ab57d41e17c2633f717064e35a7233a6682f8cf8e9538afec
23 0x01
Appendix H. Point Compression
Point compression allows a shorter representation of affine points of
an elliptic curve by exploiting algebraic relationships between the
coordinate values based on the defining equation of the curve in
question. Point decompression refers to the reverse process, where
one tries and recover an affine point from its compressed
representation and information on the domain parameters of the curve.
Consequently, point compression followed by point decompression is
the identity map.
The description below makes use of an auxiliary function (the parity
function), which we first define for prime fields GF(p), with p odd,
and then extend to all fields GF(q), where q is an odd prime power.
We assume each finite field to be unambiguously defined and known
from context.
Let y be a nonzero element of GF(q). If q:=p is an odd prime number,
y and p-y can be uniquely represented as integers in the interval
[1,p-1] and have odd sum p. Consequently, one can distinguish y from
-y via the parity of this representation, i.e., via par(y):=y (mod
2). If q:=p^m, where p is an odd prime number and where m>0, both y
and -y can be uniquely represented as vectors of length m, with
coefficients in GF(p) (see Appendix B.2). In this case, the leftmost
nonzero coordinate values of y and -y are in the same position and
have representations in [1,p-1] with different parity. As a result,
one can distinguish y from -y via the parity of the representation of
this coordinate value. This extends the definition of the parity
function to any odd-size field GF(q), where one defines par(0):=0.
H.1. Point Compression for Weierstrass Curves
If P:=(X, Y) is an affine point of the Weierstrass curve W_{a,b}
defined over the field GF(q), then so is -P:=(X, -Y). Since the
defining equation Y^2=X^2+a*X+b has at most two solutions with fixed
X-value, one can represent P by its X-coordinate and one bit of
information that allows one to distinguish P from -P, i.e., one can
represent P as the ordered pair compr(P):=(X, par(Y)). If P is a
point of order two, one can uniquely represent P by its X-coordinate
alone, since Y=0 and has fixed parity. Conversely, given the ordered
Struik Expires September 10, 2020 [Page 54]
Internet-Draft lwig-curve-representations March 2020
pair (X, t), where X is an element of GF(q) and where t=0 or t=1, and
the domain parameters of the curve W_{a,b}, one can use the defining
equation of the curve to try and determine candidate values for the
Y-coordinate given X, by solving the quadratic equation Y^2:=alpha,
where alpha:=X^3+a*X+b. If alpha is not a square in GF(q), this
equation does not have a solution in GF(q) and the ordered pair (X,
t) does not correspond to a point of this curve. Otherwise, there
are two solutions, viz. Y=sqrt(alpha) and -Y. If alpha is a nonzero
element of GF(q), one can uniquely recover the Y-coordinate for which
par(Y):=t and, thereby, the point P:=(X, Y). This is also the case
if alpha=0 and t=0, in which case Y=0 and the point P has order two.
However, if alpha=0 and t=1, the ordered pair (X, t) does not
correspond to the outcome of the point compression function.
We extend the definition of the point compression function to all
points of the curve W_{a,b}, by associating the (non-affine) point at
infinity O with any ordered pair compr(O):=(X,0), where X is any
element of GF(q) for which alpha:=X^3+a*X+b is not a square in GF(q),
and recover this point accordingly. In this case, the point at
infinity O can be represented by any ordered pair (X,0) of elements
of GF(q) for which X^3+a*X+b is not a square in GF(q). Note that
this ordered pair does not satisfy the defining equation of the curve
in question. An application may fix a specific suitable value of X
or choose multiple such values and use this to encode additonal
information. Further details are out of scope.
H.2. Point Compression for Montgomery Curves
If P:=(u, v) is an affine point of the Montgomery curve M_{A,B}
defined over the field GF(q), then so is -P:=(u, -v). Since the
defining equation B*v^2=u^3+A*u^2+u has at most two solutions with
fixed u-value, one can represent P by its u-coordinate and one bit of
information that allows one to distinguish P from -P, i.e., one can
represent P as the ordered pair compr(P):=(u, par(v)). If P is a
point of order two, one can uniquely represent P by its u-coordinate
alone, since v=0 and has fixed parity. Conversely, given the ordered
pair (u, t), where u is an element of GF(q) and where t=0 or t=1, and
the domain parameters of the curve M_{A,B}, one can use the defining
equation of the curve to try and determine candidate values for the
v-coordinate given u, by solving the quadratic equation v^2:=alpha,
where alpha:=(u^3+A*u^2+u)/B. If alpha is not a square in GF(q),
this equation does not have a solution in GF(q) and the ordered pair
(u, t) does not correspond to a point of this curve. Otherwise,
there are two solutions, viz. v=sqrt(alpha) and -v. If alpha is a
nonzero element of GF(q), one can uniquely recover the v-coordinate
for which par(v):=t and, thereby, the affine point P:=(u, v). This
is also the case if alpha=0 and t=0, in which case v=0 and the point
P has order two. However, if alpha=0 and t=1, the ordered pair (u,
Struik Expires September 10, 2020 [Page 55]
Internet-Draft lwig-curve-representations March 2020
t) does not correspond to the outcome of the point compression
function.
We extend the definition of the point compression function to all
points of the curve M_{A,B}, by associating the (non-affine) point at
infinity O with the ordered pair compr(O):=(0,1) and recover this
point accordingly. (Note that this corresponds to the case alpha=0
and t=1 above.) The point at infinity O can be represented by the
ordered pair (0, 1) of elements of GF(q). Note that this ordered
pair does not satisfy the defining equation of the curve in question.
H.3. Point Compression for Twisted Edwards Curves
If P:=(x, y) is an affine point of the twisted Edwards curve E_{a,d}
defined over the field GF(q), then so is -P:=(-x, y). Since the
defining equation a*x^2+y^2=1+d*x^2*y^2 has at most two solutions
with fixed y-value, one can represent P by its y-coordinate and one
bit of information that allows one to distinguish P from -P, i.e.,
one can represent P as the ordered pair compr(P):=(par(x), y). If P
is a point of order one or two, one can uniquely represent P by its
y-coordinate alone, since x=0 and has fixed parity. Conversely,
given the ordered pair (t, y), where y is an element of GF(q) and
where t=0 or t=1, and the domain parameters of the curve E_{a,d}, one
can use the defining equation of the curve to try and determine
candidate values for the x-coordinate given y, by solving the
quadratic equation x^2:=alpha, where alpha:=(1-y^2)/(a-d*y^2).
(Here, observe that the denominator is nonzero for any point of
E_{a,d}.) If alpha is not a square in GF(q), this equation does not
have a solution in GF(q) and the ordered pair (t, y) does not
correspond to a point of this curve. Otherwise, there are two
solutions, viz. x=sqrt(alpha) and -x. If alpha is a nonzero element
of GF(q), one can uniquely recover the x-coordinate for which
par(x):=t and, thereby, the affine point P:=(x, y). This is also the
case if alpha=0 and t=0, in which case x=0 and the point P has order
one or two. However, if alpha=0 and t=1, the ordered pair (t, y)
does not correspond to the outcome of the point compression function.
Note that the point compression function is defined for all points of
the twisted Edwards curve E_{a,d}. Here, the identity element
O:=(0,1) is associated with the compressed point compr(O):=(0,1).
(Note that this corresponds to the case alpha=0 and t=0 above.)
We extend the definition of the compression function further, to also
include a special marker element 'btm', by associating this marker
element with the ordered pair compr(btm):=(1,1) and recover this
marker element accordingly. (Note that this corresponds to the case
alpha=0 and t=1 above.) The marker element 'btm' can be represented
by the ordered pair (1,1) of elements of GF(q). Note that this
Struik Expires September 10, 2020 [Page 56]
Internet-Draft lwig-curve-representations March 2020
ordered pair does not satisfy the defining equation of the curve in
question.
Appendix I. Data Conversions
The string over some alphabet S consisting of the symbols x_{l-1},
x_{l-2}, ..., x_1, x_0 (each in S), in this order, is denoted by
str(x_{l-1}, x_{l-2}, ..., x_1, x_0). The length of this string
(over S) is the number of symbols it contains (here: l). The empty
string is the (unique) string of length l=0.
The right-concatenation of two strings X and Y (defined over the same
alphabet) is the string Z consisting of the symbols of X (in the same
order) followed by the symbols of Y (in the same order). The length
of the resulting string Z is the sum of the lengths of X and Y. This
string operation is denoted by Z:=X||Y. The string X is called a
prefix of Z; the string Y a postfix. The t-prefix of a string Z of
length l is its unique prefix X of length t; the t-postfix its unique
postfix Y of length t (where in both cases t is an integer in the
interval [0,l]). One can define these notions as well if t is
outside the interval [0,l] by stipulating that a t-prefix or
t-postfix is the empty string if t is negative and that it is the
entire string Z if t is larger than l. Sometimes, a t-prefix of a
string Z is denoted by trunc-left(Z,t); a t-postfix by trunc-
right(Z,t). A string X is called a substring of Z if it is a prefix
of some postfix of Z. The string resulting from prepending the
string Y with X is the string X||Y.
An octet is an integer in the interval [0,256). An octet string is a
string, where the alphabet is the set of all octets. A binary string
(or bit string, for short) is a string, where the alphabet is the set
{0,1}. Note that the length of a string is defined in terms of the
underlying alphabet, as are the operations in the previous paragraph.
I.1. Conversion between Bit Strings and Integers (BS2I, I2BS)
There is a 1-1 correspondence between bit strings of length l and
integers in the interval [0, 2^l), where the bit string
X:=str(x_{l-1}, x_{l-2}, ..., x_1, x_0) corresponds to the integer
x:=x_{l-1}*2^{l-1} + x_{l-2}*2^{l-2} + ... + x_1*2 + x_0*1. (If l=0,
the empty bit string corresponds to the integer zero.) Note that
while the mapping from bit strings to integers is uniquely defined,
the inverse mapping from integers to bit strings is not, since any
non-negative integer smaller than 2^t can be represented as a bit
string of length at least t (due to leading zero coefficients in base
2 representation). The latter representation is called tight if the
bit string representation has minimal length. This defines the
mapping BS2I from bit strings to integers and the mapping I2BS(x,l)
Struik Expires September 10, 2020 [Page 57]
Internet-Draft lwig-curve-representations March 2020
from non-negative integers smaller than 2^l to bit strings of length
l.
I.2. Conversion between Octet Strings and Integers (OS2I, I2OS)
There is a 1-1 correspondence between octet strings of length l and
integers in the interval [0, 256^l), where the octet string
X:=str(X_{l-1}, X_{l-2}, ..., X_1, X_0) corresponds to the integer
x:=X_{l-1}*256^{l-1} + X^{l-2}*256^{l-2} + ... + X_1*256 + X_0*1.
(If l=0, the empty string corresponds to the integer zero.) Note
that while the mapping from octet strings to integers is uniquely
defined, the inverse mapping from integers to octet strings is not,
since any non-negative integer smaller than 256^t can be represented
as an octet string of length at least t (due to leading zero
coefficients in base 256 representation). The latter representation
is called tight if the octet string representation has minimal
length. This defines the mapping OS2I from octet strings to integers
and the mapping I2OS(x,l) from non-negative integers smaller than
256^l to octet strings of length l.
I.3. Conversion between Octet Strings and Bit Strings (OS2BS, BS2OS)
There is a 1-1 correspondence between octet strings of length l and
bit strings of length 8*l, where the octet string X:=str(X_{l-1},
X_{l-2}, ..., X_1, X_0) corresponds to the right-concatenation of the
8-bit strings x_{l-1}, x_{l-2}, ..., x_1, x_0, where each octet X_i
corresponds to the 8-bit string x_i according to the mapping of
Appendix I.1 above. Note that the mapping from octet strings to bit
strings is uniquely defined and so is the inverse mapping from bit
strings to octet strings, if one prepends each bit string with the
smallest number of 0 bits so as to result in a bit string of length
divisible by eight (i.e., one uses pre-padding). This defines the
mapping OS2BS from octet strings to bit strings and the corresponding
mapping BS2OS from bit strings to octet strings.
I.4. Conversion between Field Elements and Octet Strings (FE2OS, OS2FE)
There is a 1-1 correspondence between elements of the fixed finite
field GF(q), where q:=p^m, where p is a prime number and where m>0,
and vectors of length m, with coefficients in GF(p), where each
element x of GF(q) is a vector (x_{m-1}, x_{m-2}, ..., x_1, x_0)
according to the conventions of Appendix B.2. In this case, this
field element can be uniquely represented by the right-concatenation
of the octet strings X_{m-1}, X_{m-2}, ..., X_1, X_0, where each
octet string X_i corresponds to the integer x_i in the interval
[0,p-1] according to the mapping of Appendix I.2 above. Note that
both the mapping from field elements to octet strings and the inverse
mapping from octet strings to field elements are only uniquely
Struik Expires September 10, 2020 [Page 58]
Internet-Draft lwig-curve-representations March 2020
defined if each octet string X_i has the same fixed size (e.g., the
smallest integer l so that 256^l >= p) and if all integers are
reduced modulo p. If so, the latter representation is called tight
if l is minimal so that 256^l >= p. This defines the mapping
FE2OS(x,l) from field elements to octet strings and the mapping
OS2FE(X,l) from octet strings to field elements, where the underlying
field is implicit and assumed to be known from context. In this
case, the octet string has length l*m. (Observe that with tight
representations, the parameter l is uniquely defined by the
characteristic p of the field GF(q) in question.)
I.5. Conversion between Elements of Z mod n and Octet Strings (ZnE2OS,
OS2ZnE)
There is a 1-1 correspondence between elements of the set Z_n of
integers modulo n and integers in the interval [0,n), where each
element x of Z_n is uniquely represented by the integer x mod n. In
this case, x mod n can be uniquely represented by the octet string X
according to the mapping of Appendix I.2 above. Note that both the
mapping from elements of Z_n to octet strings and the inverse mapping
from octet strings to elements of Z_n are only uniquely defined if
the octet string has a fixed size (e.g., the smallest integer l so
that 256^l >= n) and if all integers are first reduced modulo n. If
so, the latter representation is called tight if l is minimal so that
256^l >= n. This defines the mapping ZnE2OS(x,l) from elements of
Z_n to octet strings and the mapping OS2ZnE(X,l) from octet strings
to elements of Z_n, where the underlying modulus n is implicit and
assumed to be known from context. In this case, the octet string has
length l. (Observe that with tight representations, the parameter l
is uniquely defined by the parameter n in question.)
Note that if n is a prime number p, the conversions ZnE2OS and FE2OS
are consistent, as are OS2ZnE and OS2FE. This is, however, no longer
the case if n is a strict prime power.
The conversion rules for composite n values may be useful, e.g., when
encoding RSA parameters (or elements of any other non-prime size set
Z_n, for that matter).
I.6. Ordering Conventions
One can consider various representation functions, depending on bit-
ordering and octet-ordering conventions.
The description below makes use of an auxiliary function (the
reversion function), which we define both for bit strings and octet
strings. For a bit string [octet string] X:=str(x_{l-1}, x_{l-2},
Struik Expires September 10, 2020 [Page 59]
Internet-Draft lwig-curve-representations March 2020
..., x_1, x_0), its reverse is the bit string [octet string]
X':=rev(X):=str(x_0, x_1, ..., x_{l-2}, x_{l-1}).
We now describe representations in most-significant-bit first (msb)
or least-significant-bit first (lsb) order and those in most-
significant-byte first (MSB) or least-significant-byte first (LSB)
order.
One distinguishes the following octet-string representations of
integers and field elements:
1. MSB, msb: represent field elements and integers as above,
yielding the octet string str(X_{l-1}, X_{l-2}, ..., X_1, X_0).
2. MSB, lsb: reverse the bit-order of each octet, viewed as 8-bit
string, yielding the octet string str((rev(X_{l-1}),
rev(X_{l-2}), ..., rev(X_1), rev(X_0)).
3. LSB, lsb: reverse the octet string and bit-order of each octet,
yielding the octet string str(rev(X_{0}), rev(X_{1}), ...,
rev(X_{l-2}), rev(X_{l-1})).
4. LSB, msb: reverse the octet string, yielding the octet string
str(X_{0}, X_{1}, ..., X_{l-2}, X_{l-1}).
Thus, the 2-octet string "07e3" represents the integer 2019 (=0x07e3)
in MSB/msb order, the integer 57,543 (0xe0c7) in MSB/lsb order, the
integer 51,168 (0xc7e0) in LSB/lsb order, and the integer 58,119
(=0xe307) in LSB/msb order.
Note that, with the above data conversions, there is still some
ambiguity as to how to represent an integer or a field element as a
bit string or octet string (due to leading zeros). However, tight
representations (as defined above) are non-ambiguous. (Note, in
particular, that tightness implies that elements of GF(q) are always
uniquely represented.)
Note that elements of a prime field GF(p), where p is a 255-bit prime
number, have a tight representation as a 32-byte string, where a
fixed bit position is always set to zero. (This is the leftmost bit
position of this octet string if one follows the MSB/msb
representation conventions.) This allows the parity bit of a
compressed point (see Appendix H) to be encoded in this bit position
and, thereby, allows a compressed point and a field element of GF(p)
to be represented by an octet string of the same length. This is
called the squeezed point representation. Obviously, other
representations (e.g., those of elements of Z_n) may also have fixed
Struik Expires September 10, 2020 [Page 60]
Internet-Draft lwig-curve-representations March 2020
bit values in certain positions, which can be used to squeeze-in
additional information. Further details are out of scope.
Appendix J. Representation Examples Curve25519 Family Members
We present some examples of computations using the curves introduced
in this document. In each case, we indicate the values of P, k*P,
and (k+1)*P, where P is a fixed multiple (here: 2019) of the base
point of the curve in question and where the private key k is the
integer
k 45467544759954639344191351164156560595299236761702065033670739677
691372543056
(=0x6485b7e6 cd83e5c2 0d5dbfe4 f915494d 9cf5c65d 778c32c3
c08d5abd 15e29c50).
J.1. Example with Curve25519
Pm=(u, v), k*Pm=(u1, v1), and (k+1)*Pm=(u2, v2) with Curve25519:
u 53025657538808013645618620393754461319535915376830819974982289332
088255623750
(=0x753b7566 df35d574 4734142c 9abf931c ea290160 aa75853c
7f972467 b7f13246).
v 53327798092436462013048370302019946300826511459161905709144645521
233690313086
(=0x75e676ce deee3b3c 12942357 22f1d884 ac06de07 330fb07b
ae35ca26 df75417e).
u1 42039618818474335439333192910143029294450651736166602435248528442
691717668056
(=0x5cf194be f0bdd6d6 be58e18a 8f16740a ec25f4b0 67f7980a
23bb6468 88bb9cd8).
v1 76981661982917351630937517222412729130882368858134322156485762195
67913357634
(=0x110501f6 1dff511e d6c4e9b9 bfd5acbe 8bf043b8 c3e381dd
f5771306 479ad142).
u2 34175116482377882355440137752573651838273760818624557524643126101
82464621878
Struik Expires September 10, 2020 [Page 61]
Internet-Draft lwig-curve-representations March 2020
(=0x078e3e38 41c3e0d0 373e5454 ecffae33 2798b10a 55c72117
62629f97 f1394d36).
v2 43046985853631671610553834968785204191967171967937842531656254539
962663994648
(=0x5f2bbb06 f7ec5953 2c2a1a62 21124585 1d2682e0 cc37307e
fbc17f7f 7fda8518).
As suggested in Appendix C.2, the v-coordinate of k*Pm can be
indirectly computed from the u-coordinates of Pm, k*Pm, and (k+1)*Pm,
and the v-coordinate of Pm, which allows computation of the entire
point k*Pm (and not just its u-coordinate) if k*Pm is computed using
the Montgomery ladder (as, e.g., [RFC7748] recommends), since that
algorithm computes both u1 and u2 and the v-coordinate of the point
Pm may be available from context.
The representation of k and the compressed representations of Pm and
k*Pm in tight LSB/msb-order are given by
repr(k) 0x509ce215 bd5a8dc0 c3328c77 5dc6f59c 4d4915f9 e4bf5d0d
c2e583cd e6b78564
repr(Pm) 0x4632f1b7 6724977f 3c8575aa 600129ea 1c93bf9a 2c143447
74d535df 66753b75;
repr(k*Pm) 0xd89cbb88 6864bb23 0a98f767 b0f425ec 0a74168f 8ae158be
d6d6bdf0 be94f15c,
where the leftmost bit of the rightmost octet indicates the parity of
the v-coordinate of the point of Curve25519 in question (which, in
this case, are both zero, since v and v1 are even). See Appendix H.2
and Appendix I for further detail on (squeezed) point compression.
The scalar representation and (squeezed) point representation
illustrated above are consistent with the representations specified
in [RFC7748], except that in [RFC7748] only an affine point's
u-coordinate is represented (i.e., the v-coordinate of any point is
always implicitly assumed to have an even value) and that the
representation of the point at infinity is not specified. Another
difference is that [RFC7748] allows non-unique representations of
some elements of GF(p), whereas our representation conventions do not
(since tight).
A randomized representation (t1, t2) of the point k*Pm in tight LSB/
msb order is given by
Struik Expires September 10, 2020 [Page 62]
Internet-Draft lwig-curve-representations March 2020
t1 409531317901122685707535715924445398426503483189854716584
37762538294289253464
(=0x5844b232 8c4586dc 62f593c5 599c2a8c e61ba893 bb052de6
77510a42 b3a68a5a)
t2 451856098332889407421278004628150814449259902023388533929
08848927625430980881
(=0x11598452 e65138dc ce948d7e d8f46a18 b640722c 8e170957
751b7729 1b26e663),
where this representation is defined in Appendix K.5 and uses the
mapping of Appendix K.3.2 with the default square root function.
J.2. Example with Edwards25519
Pe=(x, y), k*Pe=(x1, y1), and (k+1)*Pe=(x2, y2) with Edwards25519:
x 25301662348702136092602268236183361085863932475593120475382959053
365387223252
(=0x37f03bc0 1070ed12 d3218f8b ba1abb74 fd6b94eb 62033d09
83851e21 d6a460d4).
y 54434749145175762798550436656748568411099702168121592090608501578
942019473360
(=0x7858f9e7 6774ed8e 23d614d2 36715fc7 56813b02 9aa13c18
960705c5 b3a30fd0).
x1 42966967796585460733861724865699548279978730460766025087444502812
416557284873
(=0x5efe7124 465b5bdb b364bb3e e4f106e2 18d59b36 48f4fe83
c11afc91 785d7e09).
y1 46006463385134057167371782068441558951541960707376246310705917936
352255317084
(=0x65b6bc49 985badaf bc5fdd96 fb189502 35d5effd 540b439d
60508827 80bc945c).
x2 42629294840915692510487991904657367226900127896202625319538173473
104931719808
(=0x5e3f536a 3be2364a 1fa775a3 5f8f65ae 93f4a89d 81a04a2e
87783748 00120a80).
Struik Expires September 10, 2020 [Page 63]
Internet-Draft lwig-curve-representations March 2020
y2 29739282897206659585364020239089516293417836047563355347155817358
737209129078
(=0x41bfd66e 64bdd801 c581a720 f48172a8 187445fa 350924a2
c92c791e 38d57876).
The representation of k and the compressed representations of Pe and
k*Pe in tight LSB/lsb-order are given by
repr(k) =0x0a3947a8 bd5ab103 c34c31ee ba63af39 b292a89f 27fdbab0
43a7c1b3 67eda126;
repr(Pe) =0x0bf0c5cd a3a0e069 183c8559 40dc816a e3fa8e6c 4b286bc4
71b72ee6 e79f1a1e;
repr(k*Pe) =0x3a293d01 e4110a06 b9c2d02a bff7abac 40a918df 69bbfa3d
f5b5da19 923d6da7,
where the rightmost bit of the rightmost octet indicates the parity
of the x-coordinate of the point of Edwards25519 in question (which,
in this case, are zero and one, respectively, since x is even and x1
is odd). See Appendix H.3 and Appendix I for further detail on
(squeezed) point compression.
The scalar representation and (squeezed) point representation
illustrated above are fully consistent with the representations
specified in [RFC8032]. Note that, contrary to [RFC7748], [RFC8032]
requires unique representations of all elements of GF(p).
A randomized representation (t1, t2) of the point k*Pe in tight LSB/
lsb order is given by
t1 577913017083163641949634219017190182170288776648725395935
97750427519399254040
(=0x181a32c5 10e06dbc ea321882 f3519055 535e289e 8faac654
82e26f61 aded23fe)
t2 454881407940919718426608573125377401686255068210624245884
05479716220480287974
(=0x672e36c5 ae353073 cdfac343 e8297b05 1b010d0f 5b1016db
dd4baf54 28068926),
where this representation is defined in Appendix K.5 and uses the
mapping of Appendix K.3.3 with the default square root function and
underlying isomorphic mapping between Edwards25519 and Curve25519 of
Appendix E.2.
Struik Expires September 10, 2020 [Page 64]
Internet-Draft lwig-curve-representations March 2020
J.3. Example with Wei25519
Pw=(X, Y), k*Pw=(X1, Y1), and (k+1)*Pw=(X2, Y2) with Wei25519:
X 14428294459702615171094958724191825368445920488283965295163094662
783879239338
(=0x1fe62011 89e0801e f1debed7 456a3dc7 94d3ac0b 55202fe7
2a41cf12 629e56aa).
Y 53327798092436462013048370302019946300826511459161905709144645521
233690313086
(=0x75e676ce deee3b3c 12942357 22f1d884 ac06de07 330fb07b
ae35ca26 df75417e).
X1 34422557393689369648095312405803933433606568476197477554293337733
87341283644
(=0x079c3f69 9b688181 69038c35 39c11eb5 96d09f5b 12a242b4
ce660f13 3368c13c).
Y1 76981661982917351630937517222412729130882368858134322156485762195
67913357634
(=0x110501f6 1dff511e d6c4e9b9 bfd5acbe 8bf043b8 c3e381dd
f5771306 479ad142).
X2 22716193187790487472805844610038683159372373526135883092373909944
834653057415
(=0x3238e8e2 ec6e8b7a e1e8feff 97aa58dd d2435bb5 0071cbc2
0d0d4a42 9be67187).
Y2 43046985853631671610553834968785204191967171967937842531656254539
962663994648
(=0x5f2bbb06 f7ec5953 2c2a1a62 21124585 1d2682e0 cc37307e
fbc17f7f 7fda8518).
The representation of k and the compressed representations of Pw and
k*Pw in tight MSB/msb-order are given by
repr(k) =0x6485b7e6 cd83e5c2 0d5dbfe4 f915494d 9cf5c65d 778c32c3
c08d5abd 15e29c50;
repr(Pw) =0x1fe62011 89e0801e f1debed7 456a3dc7 94d3ac0b 55202fe7
2a41cf12 629e56aa;
Struik Expires September 10, 2020 [Page 65]
Internet-Draft lwig-curve-representations March 2020
repr(k*Pw) =0x079c3f69 9b688181 69038c35 39c11eb5 96d09f5b 12a242b4
ce660f13 3368c13c,
where the leftmost bit of the leftmost octet indicates the parity of
the Y-coordinate of the point of Wei25519 in question (which, in this
case, are both zero, since Y and Y1 are even). See Appendix H.1 and
Appendix I for further detail on (squeezed) point compression.
The scalar representation is consistent with the representations
specified in [SEC1]; the (squeezed) point representation illustrated
above is "new". For completeness, we include a SEC1-consistent
representation of the point Pw in affine format and in compressed
format below.
The SEC1-compliant affine representation of the point Pw in tight
MSB/msb-order is given by
aff(Pw) =0x04 1fe62011 89e0801e f1debed7 456a3dc7 94d3ac0b
55202fe7 2a41cf12 629e56aa
75e676ce deee3b3c 12942357 22f1d884 ac06de07 330fb07b
ae35ca26 df75417e,
whereas the SEC1-compliant compressed representation of the point Pw
in tight MSB/msb-order is given by
compr(Pw) =0x02 1fe62011 89e0801e f1debed7 456a3dc7 94d3ac0b
55202fe7 2a41cf12 629e56aa;
The SEC1-compliant uncompressed format aff(Pw) of an affine point Pw
corresponds to the right-concatenation of its X- and Y-coordinates,
each in tight MSB/msb-order, prepended by the string 0x04, where the
reverse procedure is uniquely defined, since elements of GF(p) have a
unique fixed-size representation. The (squeezed) compressed format
repr(Pw) corresponds to the SEC1-compliant compressed format by
extracting the parity bit t from the leftmost bit of the leftmost
octet of repr(Pw), replacing the bit position by the value zero, and
prepending the octet string with 0x02 or 0x03, depending on whether
t=0 or t=1, respectively, where the reverse procedure is uniquely
defined, since GF(p) is a 255-bit prime field. For further details,
see [SEC1]. Note that, due to the bit-size of the prime p, the
squeezed compressed format repr(Pw) is one octet shorter than the
SEC1-compliant compressed format compr(Pw).
A randomized representation (t1, t2) of the point k*Pw in tight MSB/
msb order is given by
Struik Expires September 10, 2020 [Page 66]
Internet-Draft lwig-curve-representations March 2020
t1 446363445988889734093446280484122107283059206243307955388
84223152228795899590
(=0x62af4697 4dd469ac 96c64809 c16c8517 b6a0cee5 40ba0e2e
6dd2b36a fcc75ec6)
t2 213890166610228613105792710708385961712211281744756216061
11930888059603107561
(=0x2f49c121 8fed7912 031157ee ae066507 a972320b 6180e267
4025b006 2e67bee9),
where this representation is defined in Appendix K.5 and uses the
mapping of Appendix K.3.1 with the default square root function.
J.4. Example with Wei25519.2
Pw2=(X, Y), k*Pw2=(X1, Y1), and (k+1)*Pw2=(X2, Y2) with Wei25519.2:
X 17830493209951148331008014701079988862634531394137235438571836389
227198459763
(=0x276bb396 d766b695 bfe60ab1 3c0260dd c09f5bcf 7b3ca47c
f21c8672 d1ecaf73).
Y 21064492012933896105338241940477778461866060481408222122979836206
137075789640
(=0x2e921479 5ad47af7 784831de 572ed8e9 7e20e137 cc67378c
184ca19f f9136f48).
X1 65470988951686461979789632362377759464688342154017353834939203791
39281908968
(=0x0e7986d2 e94354ab 8abd8806 3154536a 4dcf8e6e 65557183
e242192d 3b87f4e8).
Y1 51489590494292183562535790579480033229043271539297275888817125227
35262330110
(=0x0b623521 c1ff84bc 1522ff26 3376796d be77fcad 1fcabc28
98f1be85 d7576cfe).
X2 83741788501517200942826153677682120998854086551751663061374935388
3494226693
(=0x01d9f633 b2ac2606 9e6e93f7 6917446c 2b27c16f 729121d7
709c0a58 00ef9b05).
Struik Expires September 10, 2020 [Page 67]
Internet-Draft lwig-curve-representations March 2020
Y2 42567334190622848157611574766896093933050043101247319937794684825
168161540336
(=0x5e1c41e1 fb74e41b 3a19ce50 e1b2caf7 7cabcbb3 0c1c1474
a4fd13e6 6c4c08f0).
The representation of k and the compressed representations of Pw2 and
k*Pw2 in tight MSB/msb-order are given by
repr(k) =0x6485b7e6 cd83e5c2 0d5dbfe4 f915494d 9cf5c65d 778c32c3
c08d5abd 15e29c50;
repr(Pw2) =0x276bb396 d766b695 bfe60ab1 3c0260dd c09f5bcf 7b3ca47c
f21c8672 d1ecaf73;
repr(k*Pw2) =0x0e7986d2 e94354ab 8abd8806 3154536a 4dcf8e6e 65557183
e242192d 3b87f4e8,
where the leftmost bit of the leftmost octet indicates the parity of
the Y-coordinate of the point of Wei25519.2 in question (which, in
this case, are both zero, since Y and Y1 are even). See
Appendix Appendix H.1 and Appendix I for further detail on (squeezed)
point compression.
A randomized representation (t1, t2) of the point k*Pw2 in tight MSB/
msb order is given by
t1 416669672354928148679758598803660112405431159793278161879
36189858804289581274
(=0x5c1eaaef 80f9d4af 33c119fc c99acd58 f81e7d69 999c7048
e4043a77 87a930da)
t2 361115271162391608083096560179337391059615651279123199921
18531180247832114098
(=0x4fd66668 e7174775 de44c852 92df8cfe b9832ef8 2570b3b8
fe5ec21a b2d4b3b2),
where this representation is defined in Appendix K.5 and uses the
mapping of Appendix K.3.1 with the default square root function.
J.5. Example with Wei25519.-3
Pw3=(X, Y), k*Pw3=(X1, Y1), and (k+1)*Pw3=(X2, Y2) with Wei25519.-3:
X 14780197759513083469009623947734627174363231692126610860256057394
455099634096
Struik Expires September 10, 2020 [Page 68]
Internet-Draft lwig-curve-representations March 2020
(=0x20ad4ba4 612f0586 221787b0 d01ba46c d1d8cd5a 0348ef00
eb4c9272 03ca71b0).
Y 45596733430378470319805536538617129933663237960146030424392249401
952949482817
(=0x64ced628 e982648e 4bfcf30c 71c4d267 ba48b0ce fee20062
b43ef4c9 73f7b541).
X1 47362979975244556396292400751828272600887612546997532158738958926
60745725532
(=0x0a78a650 a39995ef dcf4de88 940d4ce9 5b2ca35c c5d70e06
63b8455e 2e04e65c).
Y1 30318112837157047703426636957515037640997356617656007157255559136
153389790354
(=0x4307719a 20d08741 58d5889e 8c8ec27e 246b0342 55f8fd62
dbc9ca09 e79c7492).
X2 23778942085873786433506063022059853212880296499622328201295446580
293591664363
(=0x3492677e 6ae9d1c3 e08f908b 61033f3d 4e8322c9 fba6da81
2c95b067 9b1486eb).
Y2 44846366394651736248316749170687053272682847823018287439056537991
969511150494
(=0x632624d4 ab94c83a 796511c0 5f5412a3 876e56d2 ed18eca3
21b95bef 7bf9939e).
The representation of k and the compressed representations of Pw3 and
k*Pw3 in tight MSB/msb-order are given by
repr(k) =0x6485b7e6 cd83e5c2 0d5dbfe4 f915494d 9cf5c65d 778c32c3
c08d5abd 15e29c50;
repr(Pw3) =0xa0ad4ba4 612f0586 221787b0 d01ba46c d1d8cd5a 0348ef00
eb4c9272 03ca71b0;
repr(k*Pw3) =0x0a78a650 a39995ef dcf4de88 940d4ce9 5b2ca35c c5d70e06
63b8455e 2e04e65c,
where the leftmost bit of the leftmost octet indicates the parity of
the Y-coordinate of the point of Wei25519.-3 in question (which, in
this case, are one and zero, respectively, since Y is odd and Y1 is
Struik Expires September 10, 2020 [Page 69]
Internet-Draft lwig-curve-representations March 2020
even). See Appendix H.1 and Appendix I for further detail on
(squeezed) point compression.
A randomized representation (t1, t2) of the point k*Pw3 in tight MSB/
msb order is given by
t1 573714937613596601525680684642155667097217474964816246889
88981227297409008259
(=0x7ed71d5f 566d2259 99bdb404 bfb9d6cf d2e86ccb 1894d4a6
c75e3c69 e5eb0283)
t2 269945781324580189815142015663892935722419453863927287235
57891665397640090729
(=0x3bae63c8 70f60de0 c2e35f94 d24220f1 bb6efd00 37625869
f84923de ff4c5469),
where this representation is defined in Appendix K.5 and uses the
mapping of Appendix K.3.1 with the default square root function.
Appendix K. Auxiliary Functions
This section illustrates how one could implement common routines,
such as taking square roots and inverses in finite fields, and how to
map field elements to curve points and to curve points that avoid
some outliers.
K.1. Square Roots in GF(q)
Square roots are easy to compute in GF(q) if q = 3 (mod 4) (see
Appendix K.1.1) or if q = 5 (mod 8) (see Appendix K.1.2). Details on
how to compute square roots for other values of q are out of scope.
If square roots are easy to compute in GF(q), then so are these in
GF(q^2).
K.1.1. Square Roots in GF(q), where q = 3 (mod 4)
If y is a nonzero element of GF(q) and z:=y^{(q-3)/4}, then y is a
square in GF(q) only if y*z^2=1. If y*z^2=1, z is a square root of
1/y and y*z is a square root of y in GF(q).
K.1.2. Square Roots in GF(q), where q = 5 (mod 8)
If y is a nonzero element of GF(q) and z:=y^{(q-5)/8}, then y is a
square in GF(q) only if y^2*z^4=1.
Struik Expires September 10, 2020 [Page 70]
Internet-Draft lwig-curve-representations March 2020
a. If y*z^2=+1, z is a square root of 1/y and y*z is a square root
of y in GF(q);
b. If y*z^2=-1, i*z is a square root of 1/y and i*y*z is a square
root of y in GF(q).
Here, i is an element of GF(q) for which i^2=-1 (e.g.,
i:=2^{(q-1)/4}). This field element can be precomputed.
K.2. Inversion
If y is an integer and gcd(y,n)=1, one can efficiently compute 1/y
(mod n) via the extended Euclidean Algorithm (see Section 2.2.5 of
[GECC]). One can use this algorithm as well to compute the inverse
of a nonzero element y of a prime field GF(p), since gcd(y,p)=1.
The inverse of a nonzero element y of GF(q) can be computed as
1/y:=y^{q-2} (since y^{q-1}=1).
If inverses are easy to compute in GF(q), then so are these in
GF(q^2). Further details are out of scope.
The inverses of two nonzero elements y1 and y2 of GF(q) can be
computed by first computing the inverse z of y1*y2 and by
subsequently computing y2*z=:1/y1 and y1*z=:1/y2.
K.3. Mappings to Curve Points
One can map elements of GF(q) that are not a square in GF(q) to
points of a Weierstrass curve (see Appendix K.3.1), to points of a
Montgomery curve (see Appendix K.3.2), or to points of a twisted
Edwards curve (see Appendix K.3.3), under some mild conditions on the
domain parameters. Full details on mappings that apply if these
conditions are not satisfied are out of scope.
K.3.1. Mapping to Points of Weierstrass Curve
The description below assumes that the domain parameters a and b of
the Weierstrass curve W_{a,b} are nonzero. For ease of exposition,
we define f(z):=z^3+a*z+b. (Note that for an affine point (X,Y) of
W_{a,b} one has Y^2=f(X).)
If t is an element of GF(q) that is not a square in GF(q) and that is
unequal to -1, then the element X:=(-b/a)*(1+1/(t+t^2)) is the unique
solution of the equation f(t*X)=t^3*f(X) and is nonzero.
Consequently, either X or X':=t*X is the x-coordinate of an affine
point of W{a,b}, depending on whether f(X) is a square in GF(q).
Struik Expires September 10, 2020 [Page 71]
Internet-Draft lwig-curve-representations March 2020
a. If f(X) is a square in GF(q) and Y:=sqrt(f(X)), then t is mapped
to the point P(t):=(X, Y);
b. If f(X) is not a square in GF(q) and Y':=sqrt(f(X')), then t is
mapped to the point P(t):=(X', -Y').
Formally, this mapping is not properly defined, since a nonzero
square y:=x^2 in GF(q) has two solutions, viz. x and -x; it is
properly defined, however, if one designates for each element in
GF(q) that is a square in GF(q) precisely one square root as "the"
square root of this element. Note that always picking the square
root with zero parity (see Appendix H) satisfies this condition
(henceforth called the default square root function).
If -1 is not a square in GF(q), this element is mapped to the point
at infinity O of W_{a,b}.
The set of points of W_{a,b} that arises this way has size roughly
3/8 of the order of the curve and each such point arises as image of
one or two t values. Further details are out of scope.
NOTE 1: If -1 is not a square in GF(q), the mapping above yields the
point at infinity for t=-1. One can modify this mapping to always
yield an affine point, by mapping the element -1 to, e.g., the base
point G of W_{a,b} and leaving the remainder of the mapping the same.
Suitability of such a modification is application-specific. Details
are out of scope.
NOTE 2: The description above assumes that the domain parameters a
and b of the Weierstrass curve are nonzero. If this is not the case,
one can often find an isogenous curve W_{a',b'} for which the domain
parameters a' and b' are nonzero. If so, one can map elements of
GF(q) that are not a square in GF(q) to points of W_{a,b} via
function composition, where one uses the mapping above to arrive at a
point of W_{a',b'} and where one subsequently uses the dual isogeny
from W_{a',b'} to W_{a,b} to arrive at a point of W_{a,b}. As an
example, one can show that if a is zero and if -4*b is a cube in
GF(q) (such as is the case with, e.g., the "BitCoin" curve secp256k1
[SEC2]), this curve is 3-isogenous to a curve with this property and
the strategy above applies (for an example with secp256k1, see
Appendix L). Further details are out of scope.
K.3.2. Mapping to Points of Montgomery Curve
The description below assumes that the domain parameter A of the
Montgomery curve M_{A,B} is nonzero. For ease of exposition, we
define f(z):=z^3+A*z^2+z. (Note that for an affine point (u,v) of
M_{A,B} one has B*v^2=f(u).)
Struik Expires September 10, 2020 [Page 72]
Internet-Draft lwig-curve-representations March 2020
If t is an element of GF(q) that is not a square in GF(q) and that is
unequal to -1, then the element u:=-(1+1/t)/A is the unique nonzero
solution of the equation f(t*u)=t^3*f(u). Consequently, either u or
u':=t*u is the u-coordinate of an affine point of M{A,B}, depending
on whether f(u)/B is a square in GF(q).
a. If f(u)/B is a square in GF(q) and v:=sqrt(f(u)/B), then t is
mapped to the point P(t):=(u, v);
b. If f(u)/B is a not a square in GF(q) and v':=sqrt(f(u')/B), then
t is mapped to the point P(t):=(u', -v').
As before, formally, this mapping is not properly defined, since a
nonzero square y:=x^2 in GF(q) has two solutions, viz. x and -x; it
is properly defined, however, if one designates for each element in
GF(q) that is a square in GF(q) precisely one square root as "the"
square root of this element. Note that always picking the square
root with zero parity (see Appendix H) satisfies this condition
(henceforth called the default square root function).
If -1 is not a square in GF(q), this element is mapped to the point
at infinity O of M_{A,B}.
The set of points of M_{A,B} that arises this way has size roughly
1/2 of the order of the curve and each such point arises as image of
precisely one t value. Further details are out of scope.
NOTE 1: If -1 is not a square in GF(q), the mapping above yields the
point at infinity for t=-1. One can modify this mapping to always
yield an affine point, by mapping the element -1 to, e.g., the base
point G of M_{A,B} and leaving the remainder of the mapping the same.
Suitability of such a modification is application-specific. Details
are out of scope.
NOTE 2: The description above assumes that the domain parameter A of
the Montgomery curve is nonzero. If this is not the case, the curve
is a Weierstrass curve for which the domain parameter b is zero and
Note 2 of Appendix K.3.1 applies. If q = 3 (mod 4), an even simpler
approach is possible, where one modifies the construction above and
simply takes u:=t and u':=-t (which works, since -1 is not a square
in GF(q) and f(-t)=-f(t)). In this case, this construction can be
extended to all elements t of GF(q) and, if so, yields a 1-1 mapping
between GF(q) and all affine curve points.
Struik Expires September 10, 2020 [Page 73]
Internet-Draft lwig-curve-representations March 2020
K.3.3. Mapping to Points of Twisted Edwards Curve
One can map elements of GF(q) that are not a square in GF(q) to
points of the twisted Edwards curve E_{a,d} via function composition,
where one uses the mapping of Appendix K.3.1 to arrive at a point of
the Weierstrass curve W_{a,b} and where one subsequently uses the
isomorphic mapping between twisted Edwards curves and Weierstrass
curves of Appendix D.3 to arrive at a point of E_{a,d}. Another
mapping is obtained by function composition, where one instead uses
the mapping of Appendix K.3.2 to arrive at a point of the Montgomery
curve M_{A,B} and where one subsequently uses the isomorphic mapping
between twisted Edwards curves and Montgomery curves of Appendix D.1
to arrive at a point of E_{a,d}. Obviously, one can use function
composition (now using the respective pre-images - if these exist) to
realize the pre-images of either mapping.
K.4. Mappings to High-Order Curve Points
Appendix K.3 described how one can map elements of GF(q) that are not
a square in GF(q) to points of a Weierstrass curve, to points of a
Montgomery curve, or to points of a twisted Edwards curve, under some
mild conditions on the domain parameters. Below, we use the mappings
of that appendix and the parity function par(.) specified in
Appendix H to construct mappings to high-order curve points only
(i.e., mappings that avoid points in the small subgroup, see
Appendix B.1). We consider mappings to high-order points of a
Weierstrass curve (see Appendix K.4.1), to high-order points of a
Montgomery curve (see Appendix K.4.2), and to high-order points of a
twisted Edwards curve (see Appendix K.4.3). As before, full details
on mappings that apply if the mild conditions on the domain
parameters are not satisfied are out of scope.
K.4.1. Mapping to High-Order Points of Weierstrass Curve
The description below assumes that the domain parameters a and b of
the Weierstrass curve W_{a,b} are nonzero. For ease of exposition,
we define f(z):=z^3+a*z+b. (Note that for an affine point (X,Y) of
W_{a,b} one has Y^2=f(X).)
If t is an element of GF(q) that is not a square in GF(q) and that is
unequal to -1, the mapping of Appendix K.3.1 yields an affine point
P(t):=(X, Y) of W_{a,b}. Let P0:=(X0, Y0) be a fixed affine point of
W_{a,b} for which neither P0, P0 + P(t), nor P0 - P(t) is in the
small subgroup of W_{a,b}. (Note that this implies that P0 and P(t)
are distinct affine points of the curve and that these are not each
other's inverse.) For binary digit s, the point Q(t,s) is now
defined as follows:
Struik Expires September 10, 2020 [Page 74]
Internet-Draft lwig-curve-representations March 2020
a. If par(Y0*Y)=s, then the pair (t,s) is mapped to the point
Q(t,s):=P0 + P(t);
b. If par(Y0*Y)<>s, then the pair (t,s) is mapped to the point
Q(t,s):=P0 - P(t).
Note that this mapping is properly defined as long as the fixed point
P0 (the so-called "curve offset") alluded to above indeed exists. In
cases of practical interest that we are aware of, this is indeed the
case (see, e.g., Table 1).
If -1 is not a square in GF(q), the pair (-1,s) is mapped to the
affine point P0 of W_{a,b} (irrespective of the value of s).
The set of points of W_{a,b} that arises this way has size roughly
3/8 of the order of the curve and each such point arises as image of
up to four values of the pair (t,s). Further details are out of
scope.
From the group law for Weierstrass curves (see Appendix C.1) it
follows that one can express the coordinates of Q(t,s), with t<>-1,
in terms of the X-coordinates of P0 and P(t) and the product of their
Y-coordinates. (Here, observe that Y0*Y is a square root of
f(X0)*f(X).) Thus, Q(t,s) can be computed without the need to fully
compute P(t).
K.4.2. Mapping to High-Order Points of Montgomery Curve
The description below assumes that the domain parameters A and B of
the Montgomery curve M_{A,B} are nonzero. For ease of exposition, we
define f(z):=z^3+A*z^2+z. (Note that for an affine point (u,v) of
M_{A,B} one has B*v^2=f(u).)
If t is an element of GF(q) that is not a square in GF(q) and that is
unequal to -1, the mapping of Appendix K.3.2 yields an affine point
P(t):=(u, v) of M_{A,B}. Let P0:=(u0, v0) be a fixed affine point of
M_{A,B} for which neither P0, P0 + P(t), nor P0 - P(t) is in the
small subgroup of M_{A,B}. (Note that this implies that P0 and P(t)
are distinct affine points of the curve and that these are not each
other's inverse.) For binary digit s, the point Q(t,s) is now
defined as follows:
a. If par(B*v0*v)=s, then the pair (t,s) is mapped to the point
Q(t,s):=P0 + P(t);
b. If par(B*v0*v)<>s, then the pair (t,s) is mapped to the point
Q(t,s):=P0 - P(t).
Struik Expires September 10, 2020 [Page 75]
Internet-Draft lwig-curve-representations March 2020
Note that this mapping is properly defined as long as the fixed point
P0 (the so-called "curve offset") alluded to above indeed exists. In
cases of practical interest that we are aware of, this is indeed the
case (see, e.g., Table 1).
If -1 is not a square in GF(q), the pair (-1,s) is mapped to the
affine point P0 of M_{A,B} (irrespective of the value of s).
The set of points of M_{A,B} that arises this way has size roughly
1/2 of the order of the curve and each such point arises as image of
up to two values of the pair (t,s). Further details are out of
scope.
From the group law for Montgomery curves (see Appendix C.2) it
follows that one can express the coordinates of Q(t,s), with t<>-1,
in terms of the u-coordinates of P0 and P(t) and the product of their
v-coordinates. (Here, observe that B*v0*v is a square root of
f(u0)*f(u).) Thus, Q(t,s) can be computed without the need to fully
compute P(t).
+----------------------------+------------------------+
| Curve | Fixed curve offset P0 |
+----------------------------+------------------------+
| NIST P-224 [FIPS-186-4] | Base point (Gx,Gy) |
| NIST P-256 [FIPS-186-4] | P0:=(0,y) with y even |
| NIST P-384 [FIPS-186-4] | P0:=(0,y) with y even |
| NIST P-521 [FIPS-186-4] | P0:=(0,y) with y even |
| Brainpool224r1 [RFC5639] | Base point (Gx, Gy) |
| Brainpool256r1 [RFC5639] | Base point (Gx, Gy) |
| Brainpool320r1 [RFC5639] | Base point (Gx, Gy) |
| Brainpool384r1 [RFC5639] | Base point (Gx, Gy) |
| Brainpool512r1 [RFC5639] | P0:=(3,y), y even |
| Curve25519 [RFC7748] | P0:=(90,v), v even |
| Curve448 [RFC7748] | P0:=(50,v), v even |
| Wei25519 [Appendix E.3] | P0:=(3,y), y even |
| Wei25519.2 [Appendix G.3] | P0:=(244,y), y even |
| Wei25519.-3 [Appendix G.3] | P0:=(41,y), y even |
| secp256k1.m [Appendix L.3] | P0:=(0,y), y even |
+----------------------------+------------------------+
Table 1: Curve offsets P0 for mappings that avoid low-order points
K.4.3. Mapping to High-Order Points of Twisted Edwards Curve
One can map elements of GF(q) that are not a square in GF(q) to
points of the twisted Edwards curve E_{a,d} via function composition,
where one uses the mapping of Appendix K.4.1 to arrive at a point of
the Weierstrass curve W_{a,b} that does not have low order and where
Struik Expires September 10, 2020 [Page 76]
Internet-Draft lwig-curve-representations March 2020
one subsequently uses the isomorphic mapping between twisted Edwards
curves and Weierstrass curves of Appendix D.3 to arrive at a point of
E_{a,d} with this property. Another mapping is obtained by function
composition, where one instead uses the mapping of Appendix K.4.2 to
arrive at a point of the Montgomery curve M_{A,B} that does not have
low order and where one subsequently uses the isomorphic mapping
between twisted Edwards curves and Montgomery curves of Appendix D.1
to arrive at a point of E_{a,d} with this property. Obviously, one
can use function composition (now using the respective pre-images -
if these exist) to realize the pre-images of either mapping.
K.5. Randomized Representation of Curve Points
The mappings of Appendix K.3 allow one to represent a curve point Q
as a specific element t of GF(q), provided this point arises as a
point in the range of the mapping at hand. For Montgomery curves and
twisted Edwards curves, this covers roughly half of the curve points;
for Weierstrass curves, roughly 3/8 of the curve points. One can
extend the mappings above, by mapping a pair (t1, t2) of inputs to
the point Q:=P2(t1, t2):=P(t1) + P(t2). In this case, each curve
point has roughly q/4 representations as an ordered pair (t1, t2) on
average. In fact, one can show that if the input pairs are generated
uniformly at random, then the corresponding curve points follow a
distribution that is also (statistically indistinguishable from) a
uniform distribution, and vice-versa. Here, each pair (t1, t2)
deterministically yields a curve point, whereas for each curve point
Q, a randomized algorithm yields an ordered pair (t1, t2) of pre-
images of Q, where the expected number of randomized pre-images one
has to try is small (four if one uses the mapping of Appendix K.3.1;
two if one uses the mapping of Appendix K.3.2). For further details,
see Algorithm 1 of [Tibouchi].
Similar properties hold if one uses the mappings of Appendix K.4
(rather than those of Appendix K.3): in this case, the mapping allows
one to represent a curve point Q as a specific element (t,s) of
GF(q)x{0,1}, provided this point arises as a point in the range of
the mapping at hand. For Montgomery curves and twisted Edwards
curves, this covers roughly half of the curve points; for Weierstrass
curves, roughly 3/8 of the curve points. One can extend the mappings
above, by mapping a pair ((t1,s1), (t2,s2)) of inputs to the point
Q:=Q2((t1,s1), (t2,s2)):=Q(t1,s1) - Q(t2,s2). In this case, each
curve point has roughly q representations as an ordered pair
((t1,s1), (t2,s2)) on average. In fact, one can show that if the
input pairs are generated uniformly at random, then the corresponding
curve points follow a distribution that is also (statistically
indistinguishable from) a uniform distribution, and vice-versa.
Here, each pair ((t1,s1), (t2,s2)) deterministically yields a curve
point, whereas for each curve point Q, a randomized algorithm yields
Struik Expires September 10, 2020 [Page 77]
Internet-Draft lwig-curve-representations March 2020
an ordered pair ((t1,s1), (t2,s2)) of pre-images of Q, where the
expected number of randomized pre-images one has to try is small
(four if one uses the mapping of Appendix K.4.1; two if one uses the
mapping of Appendix K.4.2). Further details are out of scope.
NOTE 1: The main difference between the two constructions above is
that that the first construction uses the mappings to curve points
described in Appendix K.3, while the second construction uses the
mappings to high-order curve points described in Appendix K.4. Note
that Q2((t1,s1), (t2,s2)) assumes all values (+/-) P(t1) (+/-) P(t2)
if one considers all possible values for the binary digits s1 and s2.
(This, thereby, includes the value P2(t1, t2).)
NOTE 2: The second mapping above operates on input pairs (t,s), where
t is an element of GF(q) that is not a square in GF(q) and where s is
a binary digit from the set {0,1}. One can use these mappings to
produce a mapping from the nonzero elements of GF(q) to points of a
curve via function composition, where one first maps any nonzero
element u of GF(q) to the pair (t,s):=(delta*u^2, par(u)), where
delta is a fixed element of GF(q) that is not a square in GF(q), and
where one subsequently applies any of the mappings above to yield a
point of the curve in question. The resulting mapping from the
nonzero elements of GF(q) to high-order curve points can be extended
further to one that operates on all elements of GF(q) by mapping 0 to
any fixed high-order point of the curve in question (e.g., to the
fixed "curve offset" P0 of this curve [henceforth called the default
completed mapping]). Depending on application-specific criteria, yet
other function compositions may be preferred. For the first mapping
above, one can use a similar function composition, where one simply
drops the binary digit s and maps 0 to the point at infinity or any
other suitable curve point. Further details are out of scope.
Appendix L. Curve secp256k1 and Friend
This section illustrates how isogenies can be used to yield curves
with specific properties (here, for illustrated for the "BitCoin"
curve secp256k1).
L.1. Curve Definition and Alternative Representation
The elliptic curve secp256k1 is the Weierstrass curve W_{a,b} defined
over the prime field GF(p), with p:=2^256-2^32-2^9-2^8-2^7-2^6-2^4-1,
where a:=0 and b:=7. This curve has order h*n, where h=1 and where n
is a prime number. For this curve, domain parameter a is zero,
whereas b is not. The quadratic twist of this curve has order h1*n1,
where h1 is a 37-bit integer and where n1 is a prime number. For
this curve, the base point is the point (GX, GY).
Struik Expires September 10, 2020 [Page 78]
Internet-Draft lwig-curve-representations March 2020
The curve secp256k1 is 3-isogenous to the Weierstrass curve
secp256k1.m defined over GF(p), which has nonzero domain parameters a
and b and has as base point the pair (GmX,GmY), where parameters are
as specified in Appendix L.3 and where the related mappings are as
specified in Appendix L.2.
L.2. Switching Between Representations
Each affine point (X,Y) of secp256k1 corresponds to the point
(X',Y'):=(u(X)/w(X)^2,Y*v(X)/w(X)^3) of secp256k1.m, where u, v, and
w are the polynomials with coefficients in GF(p) as defined in
Appendix L.4.1, while the point at infinity of secp256k1 corresponds
to the point at infinity of secp256k1.m. Under this isogenous
mapping, the base point (GX,GY) of secp256k1 corresponds to the base
point (GmX,GmY) of secp256k1.m. The dual isogeny maps the affine
point (X',Y') of secp256k1.m to the affine point
(X,Y):=(u'(X')/w'(X')^2,Y'*v'(X')/w'(X')^3) of secp256k1, where u',
v', and w' are the polynomials with coefficients in GF(p) as defined
in Appendix L.4.2, while mapping the point at infinity O of
secp256k1.m to the point at infinity O of secp256k1. Under this dual
isogenous mapping, the base point (GmX, GmY) of secp256k1.m
corresponds to a multiple of the base point (GX, GY) of secp256k1,
where this multiple is l=3 (the degree of the isogeny; see the
description in Appendix F.4). Note that this isogenous map (and its
dual) primarily involves the evaluation of three fixed polynomials
involving the x-coordinate, which takes roughly 10 modular
multiplications (or less than 1% relative incremental cost compared
to the cost of an elliptic curve scalar multiplication).
L.3. Domain Parameters
The parameters of the curve sec256k1 and the corresponding
3-isogenous curve sec256k1.m are as indicated below. Here, the
domain parameters of the curve secp256k1 are as specified in [SEC2];
the domain parameters of secp256k1.m are "new".
General parameters (for all curves):
p 2^256-2^32-2^9-2^8-2^7-2^6-2^4-1
(=0xffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
fffffffe fffffc2f)
h 1
n 11579208923731619542357098500868790785283756427907490438260516314
1518161494337
Struik Expires September 10, 2020 [Page 79]
Internet-Draft lwig-curve-representations March 2020
(=0xffffffff ffffffff ffffffff fffffffe baaedce6 af48a03b
bfd25e8c d0364141)
h1 23479460174521 (=0x1a 9bfcab89)
n1 10131766773001318469008702396060356387381009972480920692566974370
31
(=0x099ee564 ea5d84f5 08913936 a761b0d5 d792a426 a7779817
ae2f5b67)
Weierstrass curve-specific parameters (for secp256k1):
a 0 (=0x00)
b 7 (=0x07)
GX 55066263022277343669578718895168534326250603453777594175500187360
389116729240
(=0x79be667e f9dcbbac 55a06295 ce870b07 029bfcdb 2dce28d9
59f2815b 16f81798)
GY 32670510020758816978083085130507043184471273380659243275938904335
757337482424
(=0x483ada77 26a3c465 5da4fbfc 0e1108a8 fd17b448 a6855419
9c47d08f fb10d4b8)
Weierstrass curve-specific parameters (for secp256k1.m):
a 93991599167772749909245591943117186381494883464374162770646538702
960816911535
(=0xcfcd5c21 75e2ef7d ccdce737 770b7381 5a2f13c5 09035ca2
54a14ac9 f08974af)
b 1771 (=0x06eb)
GmX 26591621185618668069038227574782692264471832498547635565821216767
730887659845
(=0x3aca5300 959fa1d0 baf78dcf f77a616f 395e586d 67aced0a
88798129 0c279145)
GmY 67622516283223102233819216063319565850973524550533340939716651159
860372686848
Struik Expires September 10, 2020 [Page 80]
Internet-Draft lwig-curve-representations March 2020
(=0x9580fce5 3a170f4f b744579f f3d62086 12cd6a23 3e2de237
f976c6a7 8611c800)
L.4. Isogeny Details
The isogeny and dual isogeny are both isogenies with degree l=3.
Both are specified by a triple of polynomials u, v, and w (resp. u',
v', and w') of degree 3, 3, and 1, respectively, with coefficients in
GF(p). The coeffients of each of these polynomials are specified in
Appendix L.4.1 (for the isogeny) and in Appendix L.4.2 (for the dual
isogeny). For each polynomial in variable x, the coefficients are
tabulated as sequence of coefficients of x^0, x^1, x^2, ..., in
hexadecimal format.
L.4.1. Isogeny Parameters
L.4.1.1. Coefficients of u(x)
0 0x54
1 0xa4d89db3ed06c81e6143ec2eca9f761d8d17260dc229e1da1f73f714506872a9
2 0xcc58ffccbd9febb4a66222c7d1311d988d88c0624bcd68ec4c758a8e67dfd99b
3 0x01
L.4.1.2. Coefficients of v(x)
0 0x1c
1 0x94c7bc69befd17f2fae2e3ebf24df1f355d181fa1a8056103ba9baad4b40f029
2 0xb2857fb31c6fe18ef993342bb9c9ac64d44d209371b41d6272b04fd61bcfc851
3 0x01
L.4.1.3. Coefficients of w(x)
0 0xe62c7fe65ecff5da53311163e8988ecc46c4603125e6b476263ac546b3efeae5
1 0x01
L.4.2. Dual Isogeny Parameters
Struik Expires September 10, 2020 [Page 81]
Internet-Draft lwig-curve-representations March 2020
L.4.2.1. Coefficients of u'(x)
0 0x8e38e38e38e38e38e38e38e38e38e38e38e38e38e38e38e38e38e38daaaaa8c7
1 0x44cd5cd7ce55a801725891578fbe7356bd936355fd0e2f538797cecff7a37244
2 0x668d0011162006c3c889f4680f9a4b77d0d26a89e6bb87b13bd8d1cfdd600a41
3 0x8e38e38e38e38e38e38e38e38e38e38e38e38e38e38e38e38e38e38daaaaa88c
L.4.2.2. Coefficients of v'(x)
0 0x4bda12f684bda12f684bda12f684bda12f684bda12f684bda12f684b8e38e23c
1 0x519ba9c1f48f68054def6a410f0fa6e8b71c6c3b4a8958324681f6508c01fada
2 0xb34680088b100361e444fa3407cd25bbe8693544f35dc3d89dec68e76eb00338
3 0x2f684bda12f684bda12f684bda12f684bda12f684bda12f684bda12f38e38d84
L.4.2.3. Coefficients of w'(x)
0 0x4d7a804ce3901e71066ccbd44636539b2bb2df6c8e4be29d8d4fb028e43033de
1 0x01
Appendix M. Curve448 and Cousins
This section introduces curves related to Curve448 and explains their
relationships.
M.1. Curve Definition and Alternative Representations
The elliptic curve Curve448 is the Montgomery curve M_{A,B} defined
over the prime field GF(p), with p:=2^{448}-2^{224}-1, where
A:=156326 and B:=1. This curve has order h*n, where h=4 and where n
is a prime number. For this curve, A^2-4 is not a square in GF(p),
whereas A-2 is. The quadratic twist of this curve has order h1*n1,
where h1=4 and where n1 is a prime number. For this curve, the base
point is the point (Gu, Gv), where Gu=5 and where Gv is an even
integer in the interval [0, p-1].
This curve has the same group structure as (is "isomorphic" to) the
twisted Edwards curve E_{a,d} defined over GF(p), with as base point
the point (Gx, Gy), where parameters are as specified in
Appendix M.3. This curve is denoted as Ed448. For this curve, the
parameter a is a square in GF(p), whereas d is not, so the group laws
of Appendix C.3 apply.
Struik Expires September 10, 2020 [Page 82]
Internet-Draft lwig-curve-representations March 2020
The curve is also isomorphic to the elliptic curve W_{a,b} in short-
Weierstrass form defined over GF(p), with as base point the point
(GX, GY), where parameters are as specified in Appendix M.3. This
curve is denoted as Wei448.
M.2. Switching between Alternative Representations
Each affine point (u, v) of Curve448 corresponds to the point (X,
Y):=(u + A/3, v) of Wei448, while the point at infinity of Curve448
corresponds to the point at infinity of Wei448. (Here, we used the
mappings of Appendix D.2 and that B=1.) Under this mapping, the base
point (Gu, Gv) of Curve448 corresponds to the base point (GX, GY) of
Wei448. The inverse mapping maps the affine point (X, Y) of Wei448
to (u, v):=(X - A/3, Y) of Curve448, while mapping the point at
infinity of Wei448 to the point at infinity of Curve448. Note that
this mapping involves a simple shift of the first coordinate and can
be implemented via integer-only arithmetic as a shift of -(p-A)/3 for
the isomorphic mapping and a shift of (p-A)/3 for its inverse, where
delta=(p-A)/3 is the element of GF(p) defined by
delta 24227957476520229684977460262933484478454712022910602009383006
63935374427222435908954654612328921819766962948206145457870178326
72736371
(=0x55555555 55555555 55555555 55555555 55555555 55555555
55555554 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
ffff3473).
(Note that, depending on the implementation details of the field
arithmetic, one may have to shift the result by +p or -p if this
integer is not in the interval [0,p-1].)
The curve Ed448 is isomorphic to the curve Curve448, where the base
point (Gu, Gv) of Curve448 corresponds to the base point (Gx,Gy) of
Ed448 and where the point at infinity and the point (0,0) of order
two of Curve448 correspond to, respectively, the point (0, 1) and the
point (0, -1) of order two of Ed448 and where each other point (u, v)
of Curve448 corresponds to the point (c*u/v, (u+1)/(u-1)) of Ed448,
where c is the element of GF(p) defined by
c sqrt((A-2)/B)
19788846729546443953835400975385803825683515259105980214819977919
60874042320025157136042631277930307478554244641856917664538448351
92428
Struik Expires September 10, 2020 [Page 83]
Internet-Draft lwig-curve-representations March 2020
(=0x45b2c5f7 d649eed0 77ed1ae4 5f44d541 43e34f71 4b71aa96
c945af01 2d182975 0734cde9 faddbda4 c066f7ed 54419ca5 2c85de1e
8aae4e6c).
(Here, we used the mapping of Appendix D.1 and normalized this using
the mapping of Appendix F.1 (where the element s of that appendix is
set to c above).) The inverse mapping from Ed448 to Curve448 is
defined by mapping the point (0, 1) and the point (0, -1) of order
two of Ed448 to, respectively, the point at infinity and the point
(0,0) of order two of Curve448 and having each other point (x, y) of
Ed448 correspond to the point ((y + 1)/(y - 1), c*(y + 1)/((y-1)*x))
of Curve448.
The curve Ed448 is isomorphic to the Weierstrass curve Wei448, where
the base point (Gx, Gy) of Ed448 corresponds to the base point
(GX,GY) of Wei448 and where the identity element (0,1) and the point
(0,-1) of order two of Ed448 correspond to, respectively, the point
at infinity O and the point (A/3, 0) of order two of Wei448 and where
each other point (x, y) of Ed448 corresponds to the point (X,
Y):=((y+1)/(y-1)+A/3, c*(y+1)/((y-1)*x)) of Wei448, where c was
defined before. (Here, we used the mapping of Appendix D.3.) The
inverse mapping from Wei448 to Ed448 is defined by mapping the point
at infinity O and the point (A/3, 0) of order two of Wei448 to,
respectively, the identity element (0,1) and the point (0,-1) of
order two of Ed448 and having each other point (X, Y) of Wei448
correspond to the point (c*(X-A/3)/Y, (X-A/3+1)/(X-A/3-1)) of Ed448.
Note that these mappings can be easily realized if points are
represented in projective coordinates, using a few field
multiplications only, thus allowing switching between alternative
curve representations with negligible relative incremental cost.
M.3. Domain Parameters
The parameters of the Montgomery curve and the corresponding
isomorphic curves in twisted Edwards curve and short-Weierstrass form
are as indicated below. Here, the domain parameters of the
Montgomery curve Curve448 and of the twisted Edwards curve Ed448 are
as specified in [RFC7748]; the domain parameters of Wei448 are "new".
IMPORTANT NOTE: the supposed base point of Ed448 specified in
[RFC7748] is incorrect, since it has order 2*n, and - in the notation
below - that point is the point (Gx,-Gy)=-(Gx, Gy)+(0,-1). The
birational map in that document is also incorrect.
General parameters (for all curve models):
p 2^{448}-2^{224}-1
Struik Expires September 10, 2020 [Page 84]
Internet-Draft lwig-curve-representations March 2020
(=0xffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
fffffffe ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
ffffffff)
h 4
n 18170968107390172263733095197200113358841034017182951507037254979
51460039615395857161957552916923759633102937090916623047737558596
49779
(=2^{446} - 0x8335dc16 3bb124b6 5129c96f de933d8d 723a70aa
dc873d6d 54a7bb0d)
h1 4
n1 18170968107390172263733095197200113358841034017182951507037254979
51601601218258006270024365576458970017341485218301563757529931495
32941
(=2^{446} + 0x0335dc16 3bb124b6 5129c96f de933d8d 723a70aa
dc873d6d 54a7bb0d)
Montgomery curve-specific parameters (for Curve448):
A 156326 (=0x0262a6)
B 1 (=0x01)
Gu 5 (=0x05)
Gv 35529392678556817526412750206378333480897639938771427183188089843
51690887869674100029326737658645509101427741472681058389855952906
06362
(=0x7d235d12 95f5b1f6 6c98ab6e 58326fce cbae5d34 f55545d0
60f75dc2 8df3f6ed b8027e23 46430d21 1312c4b1 50677af7 6fd7223d
457b5b1a)
Edwards curve-specific parameters (for Ed448):
a 1 (0x01)
d 39082/39081 = (A+2)/(A-2)
(=611975850744529176160423220965553317543219696871016626328968936
41508786004263647489178559928366602041476867897998937814706546281
5545017)
Struik Expires September 10, 2020 [Page 85]
Internet-Draft lwig-curve-representations March 2020
(=0xd78b4bdc 7f0daf19 f24f38c2 9373a2cc ad461572 42a50f37
809b1da3 412a12e7 9ccc9c81 264cfe9a d0809970 58fb61c4 243cc32d
baa156b9)
Gx 34539749303972951637400860415053741026665526007518329021640697028
16456950736723444304817877593406332217083915834240417889241245677
00732
(=0x79a70b2b 70400553 ae7c9df4 16c792c6 1128751a c9296924
0c25a07d 728bdc93 e21f7787 ed697224 9de732f3 8496cd11 69871309
3e9c04fc)
Gy 3/2
36341936214780344527466190394400226717682068034365903014074509959
03061640833653863431981918493382729650444422309218186805267490091
82721
(=0x7fffffff ffffffff ffffffff ffffffff ffffffff ffffffff
ffffffff 80000000 00000000 00000000 00000000 00000000 00000000
00000001)
Weierstrass curve-specific parameters (for Wei448):
a 48455914953040459369954920525866968956909424045821204018766013278
70748854444871817909309224657843639533925896412290915740356571996
37535
(=0xaaaaaaaa aaaaaaaa aaaaaaaa aaaaaaaa aaaaaaaa aaaaaaaa
aaaaaaa9 ffffffff ffffffff ffffffff ffffffff ffffffff fffffffe
1a76d41f)
b 26919952751689144094419400292148316087171902247678446677092229599
28193808024928787727394013698802021963292164673494953191916856645
13904
(=0x5ed097b4 25ed097b 425ed097 b425ed09 7b425ed0 97b425ed
097b425e 71c71c71 c71c71c7 1c71c71c 71c71c71 c71c71c7 1c72c87b
7cc69f70)
GX 48455914953040459369954920525866968956909424045821204018766013278
70748854444871817909309224657843639533925896412290915740356653456
29073
(=0xaaaaaaaa aaaaaaaa aaaaaaaa aaaaaaaa aaaaaaaa aaaaaaaa
aaaaaaaa 00000000 00000000 00000000 00000000 00000000 00000000
0000cb91)
Struik Expires September 10, 2020 [Page 86]
Internet-Draft lwig-curve-representations March 2020
GY 35529392678556817526412750206378333480897639938771427183188089843
51690887869674100029326737658645509101427741472681058389855952906
06362
(=0x7d235d12 95f5b1f6 6c98ab6e 58326fce cbae5d34 f55545d0
60f75dc2 8df3f6ed b8027e23 46430d21 1312c4b1 50677af7 6fd7223d
457b5b1a)
Appendix N. Further Cousins of Curve448
This section introduces some further curves related to Curve448 and
explains their relationships.
N.1. Further Alternative Representations
The Weierstrass curve Wei448 is isomorphic to the Weierstrass curve
Wei448.1 defined over GF(p), with as base point the pair (G1X,G1Y),
and isogenous to the Weierstrass curve Wei448.-3 defined over GF(p),
with as base point the pair (G3X, G3Y), where parameters are as
specified in Appendix N.3 and where the related mappings are as
specified in Appendix N.2. The Edwards curve Ed448 is isogenous to
the Edwards curve Edwards448 defined over GF(p), with as base point
the pair (G1x,G1y), where parameters are as specified in Appendix N.3
and where the related mappings are as specified in Appendix N.2.
N.2. Further Switching
Each affine point (X, Y) of Wei448 corresponds to the point (X',
Y'):=(X*s^2,Y*s^3) of Wei448.1, where s is the element of GF(p)
defined by
s 52322274343677442779379520589771028818568404587729117919590511061
93509510238347880134473888687471465216641846232724641298954890800
00881
(=0xb848cd01 981d2f83 f2829b42 eb86914e 88f44c9d 05dcbdff
dbdd1e56 c4674bc8 d6d90d91 862a38f5 ca797ca7 f21c05cf a7ac32bf
d2ca0171),
while the point at infinity of Wei448 corresponds to the point at
infinity of Wei448.1. (Here, we used the mapping of Appendix F.3.)
Under this mapping, the base point (GX, GY) of Wei448 corresponds to
the base point (G1X,G1Y) of Wei448.1. The inverse mapping maps the
affine point (X', Y') of Wei448.1 to (X,Y):=(X'/s^2,Y'/s^3) of
Wei448, while mapping the point at infinity O of Wei448.1 to the
point at infinity O of Wei448. Note that this mapping (and its
inverse) involves a modular multiplication of both coordinates with
Struik Expires September 10, 2020 [Page 87]
Internet-Draft lwig-curve-representations March 2020
fixed constants s^2 and s^3 (respectively, 1/s^2 and 1/s^3), which
can be precomputed.
Each affine point (X,Y) of Wei448 for which the Y-coordinate is
nonzero (i.e., each point with order larger than two) corresponds to
the point (X',Y'):=(X1*t^2,Y1*t^3) of Wei448.-3, where
(X1,Y1)=(u(X)/w(X),Y*v(X)/w(X)^2), where u, v, and w are the
polynomials with coefficients in GF(p) as defined in Appendix N.4.1
and where t is the element of GF(p) defined by
t 23579450751475691430882365546539966269774125426758968522698856022
13378944265540874438945283200254318223329383397068961863760712339
07365
(=0x530c9a1d7cf071d09646b83db246626b4e57ba5d6a791bef761972543209d
c5c20d81498d5ab8d7a2fb22507ca68c040a6c82eb3b6c7aaa5),
while the point at infinity and the point (A/3,0) of order two of
Wei448 corresponds to the point at infinity of Wei448.-3. (Here, we
used the isogenous mapping of Appendix F.4.) Under this isogenous
mapping, the base point (GX,GY) of Wei448 corresponds to the base
point (G3X,G3Y) of Wei448.-3. The dual isogeny maps the affine point
(X',Y') of Wei448.-3 to the affine point
(X,Y):=(u'(X1)/w'(X1),Y1*v'(X1)/w'(X1)^2) of Wei448, where
(X1,Y1)=(X'/t^2,Y'/t^3) and where u', v', and w' are the polynomials
with coefficients in GF(p) as defined in Appendix N.4.2, while
mapping the point at infinity O of Wei448.-3 to the point at infinity
O of Wei448. Under this dual isogenous mapping, the base point (G3X,
G3Y) of Wei448.-3 corresponds to a multiple of the base point (GX,
GY) of Wei448, where this multiple is l=2 (the degree of the isogeny;
see the description in Appendix F.4). Note that this isogenous map
(and its dual) primarily involves the evaluation of three fixed
polynomials involving the x-coordinate, which takes only a few
modular multiplications (less than 0.5% relative incremental cost
compared to the cost of an elliptic curve scalar multiplication).
Each point (x1,y1) of Edwards448 corresponds to the point (x,y) of
Ed448, where
x = c*x1*y1/(1-d1*x1^2*y1^2) = c*x1*y1/(2-x1^2-y1^2) and
y =(1 + d1*x1^2*y1^2)/(y1^2-x1^2) = -(x1^2+y1^2)/(x1^2-y1^2).
(Here, we used the 4-isogenous mapping of Appendix F.4. Under this
isogenous mapping, the base point (G1x, G1y) of Edwards448
corresponds to the base point (Gx,Gy) of Ed448. The dual isogeny
maps each point (x,y) of Ed448 to the point (x1,y1) of Edwards448,
where
Struik Expires September 10, 2020 [Page 88]
Internet-Draft lwig-curve-representations March 2020
x1 = (4*x*y/c)/(y^2-x^2) and
y1 = (1 - d*x^2*y^2)/(1 + d*x^2*y^2) = (2-x^2-y^2)/(x^2+y^2).
Under this dual isogenous mapping, the base point (Gx, Gy) of Ed448
corresponds to a multiple of the base point (G1x, G1y) of Edwards448,
where this multiple is l=4 (the degree of the isogeny; see the
description in Appendix F.4). Note that this isogenous map (and its
dual) primarily involves the evaluation of three fixed polynomials,
which takes only a few multiplications (less than 0.5% relative
incremental cost compared to the cost of an elliptic curve scalar
multiplication).
The point (0,1) and the point (0,-1) of order two of Edwards448
correspond to, respectively, the point at infinity and the point
(0,0) of order two of Curve448, while each other point (x1,y1) of
Edwards448 corresponds to the point (u,v) of Curve448, where
u = y1^2/x1^2 and v = y1*(2-x1^2-y1^2)/x1^3.
Under this isogenous mapping, the base point (G1x, G1y) of Edwards448
corresponds to the base point (Gu,Gv) of Curve448. The dual isogeny
maps both the point at infinity and the point (0,0) of order two of
Curve448 to the point (0,1) of Edwards448, while each other point
(u,v) of Curve448 corresponds to the point (x1,y1) of Edwards448,
where
x1 = 4*(u^2-1)*v/((u^2-1)^2+4*v^2) and
y1 = u*((u^2-1)^2-4*v^2)/(2*(u^2+1)*v^2-u*(u^2-1)^2).
Under this dual isogenous mapping, the base point (Gu, Gv) of
Curve448 corresponds to a multiple of the base point (G1x, G1y) of
Edwards448, where this multiple is l=4 (the degree of the isogeny;
see above).
N.3. Further Domain Parameters
The parameters of the Weierstrass curve with a=1 that is isomorphic
with Wei448 and the parameters of the Weierstrass curve with a=-3
that is isogenous with Wei448 are as indicated below. Both domain
parameter sets can be exploited directly to derive more efficient
point addition formulae, should an implementation facilitate this.
The domain parameters of the twisted Edwards curve Edwards448 are as
specified in [RFC7748].
General parameters: same as for Wei448 (see Appendix M.3)
Struik Expires September 10, 2020 [Page 89]
Internet-Draft lwig-curve-representations March 2020
Weierstrass curve-specific parameters (for Wei448.1, i.e., with a=1):
a 1 (=0x01)
b 65961281701807170531944804985907990287225248056560036392380945951
38183088507635437786021044927715119224497407914895790669345268896
52743
(=0xe8528596 bfbcbac9 7ebdbe4e 9683e25c 73a5ff37 6c4cd400
5a75c425 8e3eb05a 9f6f8c24 24cb5aa9 0dcf9fa4 cab6691d 5530347c
28437207)
G1X 19236211982508211644805033459306273038523230481309141518540414163
72091186292458482231912460243257247478684005448999746809691007995
9723
(=0x06c672d5 b5bae33b 010fa210 9de7937a 95db8ffc 043c507f
5e0d07a1 25382eaf 13f5fc3b 75db2614 6e6d002f d8364ed6 c9bc8fbf
bbda22ab)
G1Y 30319443056877169804488072384563064288675576234196773667920807567
79177927858755621958756222206632465988308466319556948821775845861
64158
(=0x6ac9c53c 767cd3ae cbf904a1 2923502f 115355d1 6ae8911c
5c92f612 aa854455 d1e6d29f 4db4ddea 519a174f c0dd2505 ec3328ba
250a07be)
Weierstrass curve-specific parameters (for Wei448.-3, i.e., with a=-
3):
a -3
(=0xffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
fffffffe ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
fffffffc)
b 69993768681000150084833669961900533067383335592494498709534693464
91314250731583068774689950893229681024927315747794587331422088592
54465
(=0xf686723d 80e29d06 2d00a9f1 3305b698 85790019 cca78035
9dac226b efb1ae21 125397dd 16f255b0 cc5d18e5 43582a1c af90dfe2
c0aeaec1)
G3X 40677474994869876470916133424311516856662407970799424837841348421
87696274665113140719001227030116551378877280368526334985627104680
88795
Struik Expires September 10, 2020 [Page 90]
Internet-Draft lwig-curve-representations March 2020
(=0x8f452c6b dc3265dd 580b2638 59a02b20 198cc020 1dd7fba1
8b431694 4a936052 fb4e4a41 93d01fa5 5fb5c732 7393208b 8170f3f2
be78d3db)
G3Y 54594210970205994927260789585006437115117066846498189378285031510
90310290468347714929366106635470978666795512446629051235704504868
06147
(=0xc0494f90 461db11c 35fb7646 8349399a ae230351 11330cce
b7473244 ab63c955 cf6ec02f 2656b439 44b19f4b 52eef12e 73026bbc
84444683)
Edwards curve-specific parameters (for Edwards448):
a 1 (0x01)
d1 -39081 = -(A-2)/4
(=726838724295606890549323807888004534353641360687318060281490199
18061232816673077268639638369867654593008888446184363736105349801
8326358)
(=0xffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
fffffffe ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
ffff6756)
G1x 22458004029592430018760433409989603624678964163256413424612546168
69504154674060329090291928693579532825780320751464461736746026352
47710
(=0x4f1970c6 6bed0ded 221d15a6 22bf36da 9e146570 470f1767
ea6de324 a3d3a464 12ae1af7 2ab66511 433b80e1 8b00938e 2626a82b
c70cc05e)
G1y 29881921007848149267601793044393067343754404015408024209592824137
23315061898358760035368786554187847339823032335034625005315450628
32660
(=0x693f4671 6eb6bc24 88762037 56c9c762 4bea7373 6ca39840
87789c1e 05a0c2d7 3ad3ff1c e67c39c4 fdbd132c 4ed7c8ad 9808795b
f230fa14)
N.4. Isogeny Details
The isogeny and dual isogeny are both isogenies with degree l=2.
Both are specified by a triple of polynomials u, v, and w (resp. u',
v', and w') of degree 2, 2, and 1, respectively, with coefficients in
GF(p). The coeffients of each of these polynomials are specified in
Struik Expires September 10, 2020 [Page 91]
Internet-Draft lwig-curve-representations March 2020
Appendix N.4.1 (for the isogeny) and in Appendix N.4.2 (for the dual
isogeny). For each polynomial in variable x, the coefficients are
tabulated as sequence of coefficients of x^0, x^1, x^2, ..., in
hexadecimal format.
N.4.1. Isogeny Parameters
N.4.1.1. Coefficients of u(x)
0 0x01
1 0x55555555555555555555555555555555555555555555555555555554ffffffff
ffffffffffffffffffffffffffffffffffffffffffff3473
2 0x01
N.4.1.2. Coefficients of v(x)
0 0x1c71c71c71c71c71c71c71c71c71c71c71c71c71c71c71c71c71c71c55555555
5555555555555555555555555555555555555555f72db94a
1 0xaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa9ffffffff
fffffffffffffffffffffffffffffffffffffffffffe68e6
2 0x01
N.4.1.3. Coefficients of w(x)
0 0x55555555555555555555555555555555555555555555555555555554ffffffff
ffffffffffffffffffffffffffffffffffffffffffff3473
1 0x01
N.4.2. Dual Isogeny Parameters
N.4.2.1. Coefficients of u'(x)
0 0x016c26e0e8
1 0x5555555555555555555555555555555555555555555555555555555500000000
0000000000000000000000000000000000000000000065c6
2 0x3fffffffffffffffffffffffffffffffffffffffffffffffffffffffc0000000
000000000000000000000000000000000000000000000000
Struik Expires September 10, 2020 [Page 92]
Internet-Draft lwig-curve-representations March 2020
N.4.2.2. Coefficients of v'(x)
0 0x8e38e38e38e38e38e38e38e38e38e38e38e38e38e38e38e38e38e38daaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa45836c31
1 0x5555555555555555555555555555555555555555555555555555555500000000
0000000000000000000000000000000000000000000065c6
2 0x1fffffffffffffffffffffffffffffffffffffffffffffffffffffffe0000000
000000000000000000000000000000000000000000000000
N.4.2.3. Coefficients of w'(x)
0 0x5555555555555555555555555555555555555555555555555555555500000000
000000000000000000000000000000000000000000019719
1 0x01
Appendix O. Representation Examples Curve448 Family Members
We present some examples of computations using the curves introduced
in this document. In each case, we indicate the values of P, k*P,
and (k+1)*P, where P is a fixed multiple (here: 2019) of the base
point of the curve in question and where the private key k is the
integer
k 62662039304523906689788124833289384446202946474440057655160773695
63756342505410402166230018620066482794080866641616932013327623579
01952
(=0xdcb3bbb9 e42d7aca fe62052d 902123c7 0872b984 4c1e199f
7c5d37bd 1171102b c20a6352 d9c91886 29b685de 51441e84 3afe2665
5251aa80).
O.1. Example with Curve448
Pm=(u, v), k*Pm=(u1, v1), and (k+1)*Pm=(u2, v2) with Curve448:
u 53298594738299085772373536080133483236673782578895339676785179923
90764298300090102709453866054695061082746243636045110750296444932
27715
(=0xbbb91ba3 b0ef74c3 214394b4 d8f0d32d c4a92193 5f573009
39fd86a3 8d54be2a 4d63380b 692381bb ed7339fd dca7b0cd a80166fe
18c086c3).
Struik Expires September 10, 2020 [Page 93]
Internet-Draft lwig-curve-representations March 2020
v 30578727850066757341435137807347775064915058999485530015946871157
86794631407274936870618580714107931661730999350222644894729285604
97149
(=0x6bb38e82 8d52337f 6f0395ef dc16c776 52162f5e 309112ae
fc7401bf 0cfb0499 eb1ed555 bf507ebc c33b4753 2d6dc6c5 d68dea1c
c1e4c1fd).
u1 64579461799301726935877447646800238443923683299745374127971411973
12515295161791889743228049222279188968365877164188075095074418806
82513
(=0xe37497bf 9f704689 54ec6537 cbbe91d0 3ffcdcdb 8b707253
a2212cdb e020ba9a 0bf65a1d 5d9a128a f85c63a2 79a00139 7aca56db
15335011).
v1 55735504615964066386264989698774850924544182484936624265048483231
35693859362627880184586282439234602798023594054611737412667543758
11547
(=0xc44e5e0f 2c254d23 1dc082db 77175e8c fd37793c 22ebe200
77905a5f 750b3c9f 4a95d4d5 4e1a1e54 d2d31689 4249252d 0c8b1c45
1c1481db).
u2 32685564331119553171673802371596819258307818641496728161547328225
07595618587323619256769558535630624960575212644680149034661008254
8876
(=0x0b831eca 9c6215b0 5d830361 4013732f 7a9dd07f ebb9441e
49129264 eb724f44 dc53671c ffabb9ee 0c02aa74 b083cd82 a821a4cf
6f6d8c8c).
v2 57682103223585233918507344950062950306770296215271320612937204938
77499282103483092990510136901415757273082719665657484294344333591
20741
(=0xcb2988a4 6e37f9a9 a7a1255b 2fd2eea9 82308e7c eb8e18b8
2252175f fd416a10 5984c6b8 36470e48 31879293 8f6139c6 f96164cb
14010965).
As suggested in Appendix C.2, the v-coordinate of k*Pm can be
indirectly computed from the u-coordinates of Pm, k*Pm, and (k+1)*Pm,
and the v-coordinate of Pm, which allows computation of the entire
point k*Pm (and not just its u-coordinate) if k*Pm is computed using
the Montgomery ladder (as, e.g., [RFC7748] recommends), since that
algorithm computes both u1 and u2 and the v-coordinate of the point
Pm may be available from context.
Struik Expires September 10, 2020 [Page 94]
Internet-Draft lwig-curve-representations March 2020
The representation of k and the compressed representations of Pm and
k*Pm in tight LSB/msb-order are given by
repr(k) 0x80aa5152 6526fe3a 841e4451 de85b629 8618c9d9 52630ac2
2b107111 bd375d7c 9f191e4c 84b97208 c7232190 2d0562fe
ca7a2de4 b9bbb3dc;
repr(Pm) 0xc386c018 fe6601a8 cdb0a7dc fd3973ed bb812369 0b38634d
2abe548d a386fd39 0930575f 9321a9c4 2dd3f0d8 b4944321
c374efb0 a31bb9bb 80;
repr(k*Pm) 0x11503315 db56ca7a 3901a079 a2635cf8 8a129a5d 1d5af60b
9aba20e0 db2c21a2 5372708b dbdcfc3f d091becb 3765ec54
8946709f bf9774e3 80,
where the leftmost bit of the rightmost octet indicates the parity of
the v-coordinate of the point of Curve448 in question (which, in this
case, are both one, since v and v1 are odd). See Appendix H.2 and
Appendix I for further detail on (squeezed) point compression.
The scalar representation and (squeezed) point representation
illustrated above are consistent with the representations specified
in [RFC7748], except that in [RFC7748] only an affine point's
u-coordinate is represented (i.e., the v-coordinate of any point is
always implicitly assumed to have an even value) and that the
representation of the point at infinity is not specified. (Note that
due to the bit-size of the prime p, the lossless representation
requires an additional octet compared to the lossy representation
without v-coordinate.) Another difference is that [RFC7748] allows
non-unique representations of some elements of GF(p), whereas our
representation conventions do not (since tight).
A randomized representation (t1, t2) of the point k*Pm in tight LSB/
msb order is given by
t1 642695971489808425948939115432957219707501931105169269237
122551860533279049805112466411050091592893048844749561382
909707113070546618079
(=0xdf86cb83 ae1ca6e6 da6afbaf afbb2fc0 606a136f 80eea078
c868a5d7 7e638d09 99518385 65250cf1 9c034f96 1fa28f54
f3016600 68335de2)
t2 569275737967591640709387827593956375775147481657775744720
460881642951497067363381071471046477130052706607411985560
522861593611384288817
Struik Expires September 10, 2020 [Page 95]
Internet-Draft lwig-curve-representations March 2020
(=0x3176361c 580a7bcd d7880d84 aba10bc6 57010328 afb728cc
2016461b 246bef46 0eb4bb04 8c1a3616 c3f74a56 3cc1790f
6472256b ca3481c8),
where this representation is defined in Appendix K.5 and uses the
mapping of Appendix K.3.2 with the default square root function.
O.2. Example with Ed448
Pe=(x, y), k*Pe=(x1, y1), and (k+1)*Pe=(x2, y2) with Ed448:
x 12711234107145442394649604543297947887906244696692372551963816418
93066253979844478364753304240794498368174540810674220788120782656
62747
(=0x2cc52fd1 6370554f 00c0f73f 64bda240 f5950177 d9033f6d
74acd12d 68c79a51 315f556f 240973f9 e5f71ed7 9314ee9d c87f0b1b
bcc0fd1b).
y 69251010954633529003803699627438795111055087299023774963200632446
22677618700964599963790149315020469517869703738619380660774687159
85238
(=0xf3e8bb95 c9675fd0 0c388fc5 e96cfbc7 3c19d945 76849979
34c4ab60 73c4a763 c2a89bac d3879838 f4de11a3 3a4710c2 396dea1d
cc012956).
x1 69268794439088733926883958090256942256857349796922332363888137509
71700910417786272464007666020220956482611896297610096130434552586
39205
(=0xf3f8c472 ca2e730b 05cc9092 f9d40956 029113e3 e92c2d55
76406db2 c2903721 62f43371 1c0ec80c f8d7222d 1d701467 9da18531
0fb5bb65).
y1 50516707418203531159001223293623288296803299598968490915066154362
78541820739332329525138363312119838075438487384161435963107103409
09734
(=0xb1eccbfc 5f5f92e8 d9129d14 b721c524 96fc1b1f a4c17c5f
e4979b0c 763f34ba 91299376 d2499220 19b05f56 c3bb6b5d ac988271
287d7aa6).
x2 67287262124444231243108222498849910362455590990935326363062127166
04126947894055981270997819628982374416022607672923451356182938105
87868
Struik Expires September 10, 2020 [Page 96]
Internet-Draft lwig-curve-representations March 2020
(=0xecfe1a4f a4cd7e2f 19afcf16 1ce2198f 0a850beb 41afa209
94741609 5b1a858a 8e9548f5 011d188e d50484d3 119103f6 8bcd5ba2
a6e3e8dc).
y2 13744276256057290540518554008940700979716578667786691114397525367
92684542875757407063179870154307882588988293167000249160114881659
30341
(=0x3068a338 4016ebfd a229ac73 b5c30bba ff67e183 71d1185f
19dfbbee 28478baf 9034ebad 51407f01 35162743 c2c234bc 2d484c13
552ea565).
The representation of k and the compressed representations of Pe and
k*Pe in tight LSB/lsb-order are given by
repr(k) =0x01558a4a a6647f5c 2178228a 7ba16d94 6118939b 4ac65043
d4088e88 bdecba3e f9987832 219d4e10 e3c48409 b4a0467f
535eb427 9dddcd3b;
repr(Pe) =0x6a948033 b857b69c 4308e25c c5887b2f 1c19e1cb 35d91543
c6e523ce 06d5232c 9e99216e a29b983c e3df3697 a3f11c30
0bfae693 a9dd17cf 01;
repr(k*Pe) =0x655ebe14 8e411935 bad6ddc3 6afa0d98 0449924b 6ec99489
5d2cfc6e 30d9e927 fa3e8325 f8d83f69 24a384ed 28b9489b
1749fafa 3fd3378d 01,
where the rightmost bit of the rightmost octet indicates the parity
of the x-coordinate of the point of Ed448 in question (which, in this
case, are both one, since x and x1 are odd). See Appendix H.3 and
Appendix I for further detail on (squeezed) point compression.
The scalar representation and (squeezed) point representation
illustrated above are fully consistent with the representations
specified in [RFC8032]. Note that, contrary to [RFC7748], [RFC8032]
requires unique representations of all elements of GF(p).
A randomized representation (t1, t2) of the point k*Pe in tight LSB/
lsb order is given by
t1 397357047759003459380102071532091085834125520561197668989
747600577137881485970346806080038194336473483709104865191
806326006691504231547
(=0xde295d0e 5efceb9b f43967ca be45a54b a1f75bdd a4b1b1b3
b24a8d1d f2056329 e506867e c968aa8b 866017e4 f0cbc343
2cf8e7fa 0b202fd1)
Struik Expires September 10, 2020 [Page 97]
Internet-Draft lwig-curve-representations March 2020
t2 711800301530600330791068062467600183663589340593884950808
136091389056251997893995894309660827763434071897306280320
151044063120296064809
(=0x94ecb72a 069a5322 e62d9357 c49d5664 1c351611 d1f361a8
cbb8a12c f410e821 4fbe8e02 8d85d404 399b4c7c 5a6a72ce
deef7b08 96302d5f),
where this representation is defined in Appendix K.5 and uses the
mapping of Appendix K.3.3 with the default square root function and
underlying isomorphic mapping between Ed448 and Curve448 of
Appendix M.2.
O.3. Example with Wei448
Pw=(X, Y), k*Pw=(X1, Y1), and (k+1)*Pw=(X2, Y2) with Wei448:
X 29070637261778856087396075817199998758219070555984737667402173284
55389871077654193754799253725773241315783295429899652880118118204
91344
(=0x6663c64e 5b9a1f6d cbee3f5f 839b7dd8 6f53cc3e 0a01dab3
e4a8314e 8d54be2a 4d63380b 692381bb ed7339fd dca7b0cd a80166fe
18c15250).
Y 30578727850066757341435137807347775064915058999485530015946871157
86794631407274936870618580714107931661730999350222644894729285604
97149
(=0x6bb38e82 8d52337f 6f0395ef dc16c776 52162f5e 309112ae
fc7401bf 0cfb0499 eb1ed555 bf507ebc c33b4753 2d6dc6c5 d68dea1c
c1e4c1fd).
X1 40351504322781497250899987383866753965468971276834772118588405333
77140867939355980788573436893357369201402928958042617224896092079
46142
(=0x8e1f426a 4a1af133 ff970fe2 76693c7a eaa78786 361b1cfe
4ccbd786 e020ba9a 0bf65a1d 5d9a128a f85c63a2 79a00139 7aca56db
15341b9e).
Y1 55735504615964066386264989698774850924544182484936624265048483231
35693859362627880184586282439234602798023594054611737412667543758
11547
(=0xc44e5e0f 2c254d23 1dc082db 77175e8c fd37793c 22ebe200
77905a5f 750b3c9f 4a95d4d5 4e1a1e54 d2d31689 4249252d 0c8b1c45
1c1481db).
Struik Expires September 10, 2020 [Page 98]
Internet-Draft lwig-curve-representations March 2020
X2 51724471386152414687122300763026650882740205909970876834920746101
21508416303604179834986180511406702029983417676758930643822754281
77944
(=0xb62dc975 470cc05b 082dae0b eabe1dda 25487b2a 9663eec8
f3bd3d0e eb724f44 dc53671c ffabb9ee 0c02aa74 b083cd82 a821a4cf
6f6e5818).
Y2 57682103223585233918507344950062950306770296215271320612937204938
77499282103483092990510136901415757273082719665657484294344333591
20741
(=0xcb2988a4 6e37f9a9 a7a1255b 2fd2eea9 82308e7c eb8e18b8
2252175f fd416a10 5984c6b8 36470e48 31879293 8f6139c6 f96164cb
14010965).
The representation of k and the compressed representations of Pw and
k*Pw in tight MSB/msb-order are given by
repr(k) =0xdcb3bbb9 e42d7aca fe62052d 902123c7 0872b984 4c1e199f
7c5d37bd 1171102b c20a6352 d9c91886 29b685de 51441e84
3afe2665 5251aa80;
repr(Pw) =0x80 6663c64e 5b9a1f6d cbee3f5f 839b7dd8 6f53cc3e
0a01dab3 e4a8314e 8d54be2a 4d63380b 692381bb ed7339fd
dca7b0cd a80166fe 18c15250;
repr(k*Pw) =0x80 8e1f426a 4a1af133 ff970fe2 76693c7a eaa78786
361b1cfe 4ccbd786 e020ba9a 0bf65a1d 5d9a128a f85c63a2
79a00139 7aca56db 15341b9e,
where the leftmost bit of the leftmost octet indicates the parity of
the Y-coordinate of the point of Wei448 in question (which, in this
case, are both one, since Y and Y1 are odd). See Appendix H.1 and
Appendix I for further detail on (squeezed) point compression.
The scalar representation is consistent with the representations
specified in [SEC1]; the (squeezed) point representation illustrated
above is "new". For completeness, we include a SEC1-consistent
representation of the point Pw in affine format and in compressed
format below.
The SEC1-compliant affine representation of the point Pw in tight
MSB/msb-order is given by
aff(Pw) =0x6663c64e 5b9a1f6d cbee3f5f 839b7dd8 6f53cc3e 0a01dab3
e4a8314e 8d54be2a 4d63380b 692381bb ed7339fd dca7b0cd
a80166fe 18c15250
Struik Expires September 10, 2020 [Page 99]
Internet-Draft lwig-curve-representations March 2020
6bb38e82 8d52337f 6f0395ef dc16c776 52162f5e 309112ae
fc7401bf 0cfb0499 eb1ed555 bf507ebc c33b4753 2d6dc6c5
d68dea1c c1e4c1fd,
whereas the SEC1-compliant compressed representation of the point Pw
in tight MSB/msb-order is given by
compr(Pw) =0x03 6663c64e 5b9a1f6d cbee3f5f 839b7dd8 6f53cc3e
0a01dab3 e4a8314e 8d54be2a 4d63380b 692381bb ed7339fd
dca7b0cd a80166fe 18c15250.
The SEC1-compliant uncompressed format aff(Pw) of an affine point Pw
corresponds to the right-concatenation of its X- and Y-coordinates,
each in tight MSB/msb-order, prepended by the string 0x04, where the
reverse procedure is uniquely defined, since elements of GF(p) have a
unique fixed-size representation. The (squeezed) compressed format
repr(Pw) corresponds to the SEC1-compliant compressed format by
extracting the parity bit t from the leftmost bit of the leftmost
octet of repr(Pw), and replacing this leftmost octet with 0x02 or
0x03, depending on whether t=0 or t=1, respectively, where the
reverse procedure is uniquely defined. For further details, see
[SEC1]. Note that, due to the bit-size of the prime p, the squeezed
compressed format repr(Pw) and the SEC1-compliant compressed format
compr(Pw) have the same size.
A randomized representation (t1, t2) of the point k*Pw in tight MSB/
msb order is given by
t1 655783099225353926682910498535559663266263823350679216116
172951494291735730803127024621397533084891460609898061397
896825551162064841608
(=0xe6f93655 2765628b accfe61c 7dc6a594 e06fb243 70195ded
74d88a53 fdedc2e8 077e0eff 62fa6a80 fa26b499 1f8796f5
21f2f03b f7e92b88)
t2 357918241879339174086992006475988394618511927120788596330
507910466738735762660894972854331591097934354210992993787
402433561014235472657
(=0x7e0ffcaf 7add27bc bb723629 95fdedd0 8769f676 78d953bc
0d38f4f6 d63a59dc 00f2d55a a4db7dab 16364503 591edcb1
e095a577 43dea311),
where this representation is defined in Appendix K.5 and uses the
mapping of Appendix K.3.1 with the default square root function.
Struik Expires September 10, 2020 [Page 100]
Internet-Draft lwig-curve-representations March 2020
O.4. Example with Wei448.-3
Pw3=(X, Y), k*Pw3=(X1, Y1), and (k+1)*Pw3=(X2, Y2) with Wei448.-3:
X 54121793865726175505902038600562190720650456678500106168173285986
99999531708218763586616425010404811083912084906688745035466757984
48968
(=0xbe9f5a23 51709e13 d5ad50c2 a27be8ee 1b051970 2580d5c3
c2de7f75 3010635e d89ef547 8b67dc54 16d63c5b 1cc1116f dd453515
71b39b48).
Y 14962282101304548030627835311887275833718070818965306362006934455
59168773381983445709256615887526455657034051121085622763637035580
12661
(=0x34b2dcc4 92d6a940 e6249c14 122d0ba4 5dc040e9 3f060d8f
a65fa300 eb3cc969 25188b59 2d31039c f7a8e14a 48320a32 efe9b42b
986afef5).
X1 18808295916646645825216065847266150404062470629833854840155953858
63091795696773741607659794828181692381790403935750135247605982648
6547
(=0x069fdd7c 2ec1ecbf d3cd0e27 1e8110c6 d2e478f2 aa393928
64a5511e da0b8dc7 3834fd57 b5ef8527 361a8176 c6da44ee 63701c0c
f49d7d13).
Y1 12212945244064471634326466576257313927639904273911210953487761656
77684161144865373513143868308041748047828401098060667767703779846
85920
(=0x2b03e68e b61581c4 9f977443 3e1ddc63 976f8f1d cdb185ee
9c53328d b425973d 359bbc09 468645c4 0996a2c7 fda561be acb4d0b5
745ab760).
X2 58672976485086436102048679093716482249296622848351051568512020319
97872083950108489407370832733527154843728068195507632886574086695
12670
(=0xcea6f66e e741e7b3 ee50acd4 bd6eacbf 821fab72 bf5fe85b
8f614af9 04aff677 15e820b9 e4bcc159 f67a97f3 2c176d2c d9b7cdeb
f753f3de).
Y2 63661899992109030051219177516378471383513217472497460517936503629
79522840238080543318627428149249774773108009447466292682661818280
41265
Struik Expires September 10, 2020 [Page 101]
Internet-Draft lwig-curve-representations March 2020
(=0xe0394408 ed2b4efb b6b6ac7e bc815516 fdf31a6e d32db3f9
54cd8ac1 c7ddf0cc e7507688 a70f219a 57eef863 49003560 66747ca3
00105a31).
The representation of k and the compressed representations of Pw3 and
k*Pw3 in tight MSB/msb-order are given by
repr(k) =0xdcb3bbb9 e42d7aca fe62052d 902123c7 0872b984 4c1e199f
7c5d37bd 1171102b c20a6352 d9c91886 29b685de 51441e84
3afe2665 5251aa80;
repr(Pw3) =0x80 be9f5a23 51709e13 d5ad50c2 a27be8ee 1b051970
2580d5c3 c2de7f75 3010635e d89ef547 8b67dc54 16d63c5b
1cc1116f dd453515 71b39b48;
repr(k*Pw3) =0x00 069fdd7c 2ec1ecbf d3cd0e27 1e8110c6 d2e478f2
aa393928 64a5511e da0b8dc7 3834fd57 b5ef8527 361a8176
c6da44ee 63701c0c f49d7d13,
where the leftmost bit of the leftmost octet indicates the parity of
the Y-coordinate of the point of Wei448.-3 in question (which, in
this case, are one and zero, respectively, since Y is odd and Y1 is
even). See Appendix H.1 and Appendix I for further detail on
(squeezed) point compression.
A randomized representation (t1, t2) of the point k*Pw3 in tight MSB/
msb order is given by
t1 450833060883286904091316612794941178576639837300736625958
696097131313213727115363096930063001237631586932727905179
306828042642854311987
(=0x9ec9ba07 3fb2bb5e 9dbee995 067ce094 63601ecd 325f0930
aea79cb8 745fa71d 4caa37ee f04fab67 ab2de747 4ac0a025
830f4828 429cf833)
t2 339205723274519707955026734148022275762579914421865223818
363622725164496136165251928391223173879522521195772276587
373445978123589677750
(=0x7778c1f9 9d900633 d161d7ea a963ddad e9101d3f f4f04710
623d2a51 6ca10133 3db9ccc3 86df9271 fbb72740 77f79dd1
9aed0bfb e3bc72b6),
where this representation is defined in Appendix K.5 and uses the
mapping of Appendix K.3.1 with the default square root function.
Struik Expires September 10, 2020 [Page 102]
Internet-Draft lwig-curve-representations March 2020
O.5. Example with Edwards448
Pe1=(x, y), k*Pe1=(x1, y1), and (k+1)*Pe1=(x2, y2) with Edwards448:
x 70320395893028961673046639985409870226249442701760956079298956688
26896600999421897751877804946848997852325361659665744287620719558
67733
(=0xf7acf3ca b79b29c2 aa44863d 9edaeca4 8c90ad84 e460df42
7dd9ab59 1bd8a844 07cb3419 59309b33 1e22bfa1 a2d37e10 e2e42a1f
170f0855).
y 70628706854857281648863291487942166052137991441320055237644304464
58787938273165391464653528929699350754224243613996187734424074211
98773
(=0xf8c2f181 3bceee8e 085ecd70 d1b6aa4c ea9b95bd 8f36ab44
c79e9124 1ea625b7 f9f5ec57 89cc5af2 a2eb255a b252b874 509dc0d9
685841b5).
x1 38125875041649701211705790554244713713134918749445854542272999596
74058986304488795258334978838809456257721496105769894880185657328
40277
(=0x864880b9 e1900c68 ba4a545a 6fe2b161 62dcc3b9 fa218e4b
feba9828 5cee5193 f2c989f6 c3b94eb6 2914dce7 b4818e4d 8fc8d51f
05a13355).
y1 11060653846610182753991162627427631707898421166839907726978369444
53337541552746428662176632660036639406375548888849623833963458813
1154
(=0x03e54af3 7f4cf5e6 5f1e2acd 5c4a4554 76adc652 b198ab2a
719e5aa9 ee749871 0193da82 ab6d000b f55836b1 0615653f 69514297
f4459f52).
x2 15620503788413497044804517304021524439062374489822547728508337937
50606335270276724725939683726318058744384611584731365019896485812
8760
(=0x05806f71 95e85352 ef3960ac 1ff9cf6c 3c99e0ee 2e75edfc
a133cafc 4a4b5fbf e4339859 c5fa123b 70ad2faf 7584ab9d 264540e7
7d560978).
y2 40019917514121727463122190125689377890703570698337158159153510836
68442386516751945577468473801561261386285902585868517988506010293
44096
Struik Expires September 10, 2020 [Page 103]
Internet-Draft lwig-curve-representations March 2020
(=0x8cf44811 3cec6e07 d1bbe9f5 4062075c 6fec0ac5 31272dce
1f446aeb d895373d e312c18d 6a345755 2861e014 0cc23158 a46ace4c
9ca21b60).
The representation of k and the compressed representations of Pe1 and
k*Pe1 in tight LSB/lsb-order are given by
repr(k) =0x01558a4a a6647f5c 2178228a 7ba16d94 6118939b 4ac65043
d4088e88 bdecba3e f9987832 219d4e10 e3c48409 b4a0467f
535eb427 9dddcd3b;
repr(Pe1) =0xad821a16 9b03b90a 2e1d4a4d 5aa4d745 4f5a3391 ea37af9f
eda46578 248979e3 22d56cf1 bda9d957 32556d8b 0eb37a10
717773dc 818f431f 01;
repr(k*Pe1) =0x4af9a22f e9428a96 fca6a860 8d6c1aaf d000b6d5 415bc980
8e192e77 955a798e 54d5198d 4a63b56e 2aa2523a b35478fa
67af32fe cf52a7c0 01,
where the rightmost bit of the rightmost octet indicates the parity
of the x-coordinate of the point of Edwards448 in question (which, in
this case, are both one, since x and x1 are odd). See Appendix H.3
and Appendix I for further detail on (squeezed) point compression.
The scalar representation and (squeezed) point representation
illustrated above are fully consistent with the representations
specified in [RFC8032]. Note that, contrary to [RFC7748], [RFC8032]
requires unique representations of all elements of GF(p).
A randomized representation (t1, t2) of the point k*Pe1 in tight LSB/
lsb order is given by
t1 125390048858887400104074787879402833851854739339836093733
734638776755983021034212058415891288350265701101219981698
849086128138510420407
(=0xed921f3d 6ea4e452 dd06e783 782cbeb3 c5847a79 d9e6b993
bd387cf5 feeddafe af8c038d f2732362 92724d37 273eedfc
f2ab2499 98a79434)
t2 365268494484253132875102676783560666625109899133767696106
602723958322248430160651314075127005631031993354968950936
71875730862008188281
(=0x9ebc28c0 86176a1a c7f0cf71 ca5f2a8f 908bb27b e85c0bbd
1641c052 e542f7d3 88e18886 5afdca32 8df45408 8b6da28c
0bc09d83 309ebb30),
Struik Expires September 10, 2020 [Page 104]
Internet-Draft lwig-curve-representations March 2020
where this representation is defined in Appendix K.5 and uses the
mapping of Appendix K.3.3 with the default square root function and
underlying 4-isogenous mapping between Edwards448 and Curve448 of
Appendix N.2.
Author's Address
Rene Struik
Struik Security Consultancy
Email: rstruik.ext@gmail.com
Struik Expires September 10, 2020 [Page 105]